REVELL Corvette Z06 2004 User Manual
KIT 2827 85282700200
™
2004 Corvette® Z06
Commemorative Edition
Over its 51 years of existence, there has certainly been a tremendous amount of changes to the beloved Corvette®. However, one
basic formula has remained constant-fiberglass body, spirited engine
and good handling equals big driving fun.
All Corvettes® are special, but there have been some a bit more special released along the way. You’ve heard of them and seen pictures
of them. The high-performance Corvettes® with the alphabet soup
mix of names, typically referring to the option package number, such
as ZL-1, L-88, etc. These monsters offered performance above and
beyond the "norm". They were very expensive and a pain to drive for
everyday commuting as their high compression engines rocked and
rolled at idle. If you wanted any additional creature comforts, you
could forget it. The fiercest of these beasts negated any possibility
of power accessories. Even the radio and heater were deleted. But
they were fast, very fast indeed.
Fast forward to today. They still produce Corvettes®, but maybe
idle, power everything, 19 miles per gallon in the city, 28 on the road.
New shock valving for the suspension provides a ride like a much
larger car. Doesn’t sound too exciting, right? Wrong. Checking the
Z06™ box on the order form supplies a 405 horsepower 5.7 litre V8
and a special 6 speed manual transmission that will take you from
zero to 60 mph in 4 seconds flat, quicker than virtually all the fastest
Vettes® of the past. Guess you can have your cake and eat it, too.
Featured on the 2004 Corvette®, last of the fifth generation, is the
Commemorative Edition, honoring the on-track warriors who have
taken the C5 Corvette® to new heights in competition over the last
few years. Special LeMans Blue paint with a specific silver and red
graphic scheme on the hood tells you that this Vette® is not your runof-the-mill example. We’ve included that hood stripe in this RevellMonogram kit and while we couldn’t include the new carbon fiber
hood the real car comes equipped with, we’ve priced this Z06™ well
below the $51,000 your local Chevrolet® dealer will ask you for.
something more comfortable in a car may be to your liking these
days. How about a 2004 Corvette® with the Z06™ package? Smooth
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas to be
cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up
and slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont mar
quées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller
en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son sup
port en papier.
5. Mettre l'autocollant en position sur le modèle face sur le
dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles
d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
This paint guide is provided to
complete this kit as shown on the box
Ce guide de peinture est fourni pour reproduire le
modèle réduit qui apparaît sur la boîte.
Aluminium
Burnt Iron
Flat Black
Gloss Dark Blue Metallic
Semigloss Black
Satin White
Steel
Turn Signal Amber
Satin Red
Aluminium
Fer brûle
Noir mat
Bleu foncé brilliant métallisé
Noir satiné
Blanc satiné
Acier
Clignotant ambre
Rouge satiné
.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062
Be sure to include the plan number (85282700200), part number, description, your return address and phone number.
Visit our website: www.revell-monogram.com
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
1
ENGINE ASSEMBLY
A
B
31
ENGINE HALF
DRIVER SIDE
SEMIGLOSS BLACK
(PAINT SHADED AREA
ALUMINUM)
34
FRONT BELT
ASSEMBLY
ALUMINUM
(PAINT SHADED
AREA FLAT BLACK)
32
ENGINE HALF
PASSENGER SIDE
SEMIGLOSS BLACK
(PAINT SHADED AREA
ALUMINUM)
35
REAR BELT
ASSEMBLY
ALUMINUM
(PAINT SHADED
AREA FLAT BLACK)
68
ROCKER COVER
DRIVER SIDE
ALUMINUM
79
PASSENGER SIDE
ALUMINUM
36
CYLINDER
HEAD
(BOTH SIDES)
SEMIGLOSS
BLACK
EXHAUST MANIFOLD
NOTE: REPEAT FOR OTHER
SIDE USING PASSENGER SIDE
61
7
74
WATER PUMP
SEMIGLOSS
BLACK
OIL FILLER CAP
SEMIGLOSS BLACK
9
ENGINE COVER
PASSENGER SIDE
37
DRIVER SIDE
BURNT IRON
38
PASSENGER SIDE
BURNT IRON
70
SATIN RED
9
69
ENGINE COVER
DRIVER SIDE
SATIN RED
56
LOWER HOSE
FLAT BLACK
55
UPPER HOSE
FLAT BLACK
30
INDUCTION
MANIFOLD
SEMIGLOSS
BLACK
62
OIL PAN
SEMIGLOSS BLACK
(PAINT SHADED AREA SATIN WHITE)
67
OIL PAN
BOTTOM
SEMIGLOSS
BLACK
TRANSMISSION PAN
73
ALUMINUM
2
11
CHASSIS
SEMIGLOSS
BLACK
SUSPENSION ASSEMBLY
43
SHOCK ABSORBER
REAR
SEMIGLOSS BLACK
UNIT FRONT
44
FRONT
SHOCK
ABSORBER
SEMIGLOSS
BLACK
TORSION BAR
SEMIGLOSS
BLACK
53
STEERING
SEMIGLOSS
BLACK
52
FIRST
51
SUSPENSION
LOWER FRONT
ALUMINUM
Loading...