5
REVEL Concerta M12
Owner’s Manual
About the M12
Thank you for purchasing the Revel
Concerta M12 Loudspeaker. A two-way
monitor, the M12 delivers outstanding
accuracy, low distortion and maximum
output across the entire frequency range.
The Concerta M12 is suitable for use in a
bookshelf, built-in to a custom cabinet, or
placed on a pedestal stand. Two proprietary transducers, a sophisticated filter
network, and an acoustically inert cabinet
allow the M12 to achieve acoustical precision and performance worthy of the most
demanding home entertainment systems.
A two-way design, the M12 transducers
effectively cover a wide frequency spectrum. A 6.5-inch (165mm) woofer delivers
highly refined midrange frequencies and
surprisingly extended low frequency
response. A 1-inch (25mm) dome tweeter is
mounted in a Controlled Acoustic
Impedance waveguide which dramatically
improves off-axis response. The tweeter
accurately reproduces high frequencies well
above audible levels.
Combining superior form and function,
the M12 transducers feature a distinctive
design that allows for smoother frequency
response. The woofer cone and tweeter are
constructed with Organic Ceramic
Composite cone material to reduce distortion. The spiders are constructed with a
high-strength Nomex/cotton blend with
optimized geometry for increased linearity.
The M12 woofer features a ceramic motor
system with magnetic shielding to prevent
interference with CRT video monitors.
The woofer is built with a butyl rubber surround for large, linear excursion capabilities. The woofer also includes round copper
wire voice coils wound on 1-inch (25.4mm)
Kapton® bobbins which enable high
power handling.
The tweeter dome is under-hung with copper-clad aluminum wire for low distortion.
The tweeter’s Neodymium magnet contains
Ferrofluid® which helps to achieve highpower handling with reduced compression.
Magnetic shielding prevents video monitor
interference.
A high-order filter at 2.5kHz optimizes
loudspeaker on-axis and off-axis response,
helping to assure smooth response and
timbral accuracy. Gold-plated binding
posts accommodate heavy-gauge speaker
cable. If desired, the M12 can be placed on
a pedestal stand to optimize its performance.
The M12 cabinet is constructed with medium-density fiberboard (MDF) walls to
reduce cabinet-induced colorations.
Threaded inserts on the bottom of the cabinet accomodate screws for secure fastening
to the optional pedestal stand.
Since 1996, Revel has stood at the forefront
of loudspeaker design and performance.
Backed by Harman International’s extensive research and design facilities, the
Revel Concerta Series Loudspeakers benefit
from cutting-edge development tools. A
multi-channel listening lab provides for
double-blind listening tests. A laser interferometer enables detailed driver and cabinet analysis. Multiple large anechoic
chambers provide for precise tests and
measurements. Finite element analysis
allows for advanced loudspeaker modeling.
A stereo lithography apparatus provides
tight tolerances.
Adding to the proud lineage of Revel’s
Ultima and Performa Series Loudspeakers,
the Concerta M12 solidifies Revel’s reputation as the leading designer and manufacturer of high-quality, high-performance
loudspeakers.