REVELL CONCERTA 2 B10 Owner's Manual

B10 Subwoofer

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or
moisture, does not operate normally or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

16. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

17. WARNING: Apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts
inside. Refer servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Operating Temperature 35˚C.

2

B10 Subwoofer

Owner’s Manual

ABOUT THE REVEL® CONCERTA 2™
B10 SUBWOOFER

Thank you for purchasing the Revel Concerta 2 B10, a high-performance
powered subwoofer that perfectly augments Revel Concerta 2 Series
loudspeakers in stereo music or home theater entertainment systems.
The B10’s adjustable controls allow you to optimize the subwoofer’s
performance in any system and listening room.

Featuring a 10" (254mm) woofer with 1-1/2" (26mm) peak-to-peak
excursion and powered by a 800-watt amplifier, the B10 subwoofer
reproduces deep, realistic bass with very low distortion, even at the
lowest frequencies and high output levels.

Combining superior form and function, the B10’s proprietary woofer is
constructed with an polycellulose fiber diaphragm for great strength at
high output levels. The spider incorporates a superior-strength Corex/
cotton blend with optimized geometry for increased linearity. The motor
includes a large ceramic-magnet motor system. A 2.6" (50.8mm) copper
voice coil is wound on a Kapton
and freedom from compression. The vented center pole facilitates
heat dissipation, allowing more efficient high-power handling and low
compression.

The B10 cabinet consists of medium-density fiberboard (MDF) walls and
extensive internal bracing to reduce cabinet-induced colorations. Rubber
padded feet are attached to the bottom of the cabinet for optimal
stability, accommodating installations on any floor surface.

Since 1996, the Revel brand has been at the forefront of loudspeaker
design. Backed by Harman International’s extensive research and design
facilities, Revel Concerta 2 Series speakers benefit from cutting-edge
development tools, such as:

• A multichannel listening lab allows for double-blind listening tests.

• A laser interferometer enables detailed driver and cabinet analysis.

• Multiple large anechoic chambers provide for precise tests and
measurements.

• Finite-element analysis allows for advanced loudspeaker modeling.

• A stereo lithography apparatus aids in achieving tight tolerances.

Adding to the proud lineage of Revel Ultima™ and Performa™ Series
loudspeakers, the subwoofer further substantiates the Revel reputation
for high-quality, high-performance loudspeakers and subwoofers.

®

bobbin for impressive power handling

SUBWOOFER PLACEMENT

Below 300Hz, loudspeaker and listener locations have a profound impact
on the way sound is reproduced. All rooms have “standing waves,” by
which certain frequencies are emphasized or diminished. Their complex
patterns can combine to introduce tremendous sound coloration at low
frequencies.

The Concerta 2 B10’s Equalization controls can help to compensate for
these effects, but no electronic system alone can fully compensate for
the dramatic effects of room acoustics. Every room has locations where
“nulls” at specific frequencies occur. These cancellations of the sound
are like “black holes,” which no amount of equalization can fill. The
best results are always achieved through careful placement of both the
loudspeakers and the listening position. Preferable placement can be
determined through the use of computer modeling programs, or by trial­and-error measurements. For optimal results, find the best loudspeaker
and listener locations first, then use the B10 Equalization controls for
fine-tune adjustments.

To help determine good locations for the subwoofer(s) and the
listener(s), it is recommended that you make high-resolution in-room
response measurements. Your authorized Revel dealer can make the
appropriate measurements, using suitable equipment to ensure optimal
results.

NOTE: Many sound-measurement devices are not accurate
enough to properly measure low-frequency performance in a
listening room, since room boundaries can often cause modes
(standing waves) with very narrow-band peaks and dips.
Check with your authorized Revel dealer to confirm that your
measurement equipment is suitable for accurate, high-resolution
measurements.

B10 HIGHLIGHTS

• High-output capability with low distortion

• Proprietary 10" (254mm) anodized-aluminum diaphragm woofer

• Built-in 800W RMS amplifier

• Line-level RCA inputs

• Advanced woofer motor structure

• Large voice coil for wide dynamic range without compression

• Phase switch

• Low-pass frequency control

• Parametric room equalization controls

• Elegant cabinet design with paint finishes

B10 Subwoofer
Owner’s Manual

3