REVELL Bell Huey Gunship User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]
The best known and widely publicized aircraft in the world is the Bell
Model 204 UH-1B Iroquois. This turbine powered craft is more widely
known as the “Huey Chopper”.
Following considerable evaluation,
Bell decided that the best configuration to cope with the new requirements would be an all new turbine
powered helicopter. It was designed
for transport of personnel, equipment,
supplies, medical evacuation, battlefield ambulance service, general utility missions and as an instrument
trainer. It was this design which won
the design competition in June of
1955. Appreciation is due to Bell
Helicopter Co. for supplying information and data necessary to produce
this detailed scale model from Revell.
KIT 5633 85563300200
®
BELL
Bell, Huey, emblems, logos and body designs are trademarks of Textron Innovations Inc. and are used under license by Revell Inc.
HUEY ® GUNSHIP
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas to be
cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up
and slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
* OPTIONAL PARTS
`` ` `
* PIECES EN OPTION
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont mar
quées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller
en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son sup
port en papier.
5. Mettre l'autocollant en position sur le modèle face sur le
dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles
d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
` `
* CEMENT TOGETHER
* A COLLER
complete this kit as shown on the box
Ce guide de peinture est fourni pour reproduire le
Dark Brown
Flat Black
Flesh
Gunmetal
Dark Gray FS 36176
Insignia Red FS 31136
Insignia Yellow FS 33538
Olive Drab FS 34087
Satin White
Silver
Steel
Transparent Green
Transparent Red
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
This paint guide is provided to
modèle réduit qui apparaît sur la boîte.
Brun foncé
Noir mat
Chair
Bronze
Gris foncé
Rouge emblème
Jaune emblème
Olivet
Blanc satiné
Argent
Acier
Vert transparent
Rouge transparent
.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85563300200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2011. All rights reserved.
1
COCKPIT ASSEMBLY
A
(USE 102 FOR THE
SHOWN IN PLACE)
BULKHEAD
DARK GRAY
(PAINT SHADED AREA
INSIGNIA RED)
101
SEAT SUPPORT
OTHER SIDE
OLIVE DRAB
106
(PAINT SEAT BELTS
97
FLOOR
DARK GRAY
103
BENCH SEAT
INSIGNIA RED
SATIN WHITE)
98
CREW SEAT
DARK GRAY
59
PITCH STICK
FLAT BLACK
PITCH STICK
FLAT BLACK
GG
IF PILOTS ARE TO BE INCLUDED,
ATTACH THEM TO SEATS IN THIS
STEP BEFORE THE CONTROL
STICKS ARE INSERTED
35
PILOT HALF
36
PILOT HALF
104
INSTRUMENT
PANEL
SATIN BLACK
60
CONTROL
STICK
FLAT BLACK
60
CONTROL
59
STICK
FLAT BLACK
OPTIONAL PAINTING GUIDE FOR
PILOT FIGURES - PAINT FLIGHT
SUIT OLIVE DRAB, HELMET SATIN
WHITE, BOOTS DARK BROWN,
ARMS AND FACE FLESH, HOSES
FLAT BLACK, STRAPS SATIN
WHITE WITH SILVER BUCKLES
SEE DECAL PLACEMENT FOR
OPTIONAL DECALS
B
17
RIGHT SUPPORT
DARK GRAY
16
ROOF FRAME
DARK GRAY
18
LEFT SUPPORT
DARK GRAY
Kit 5633 - Page 2
1
COCKPIT ASSEMBLY
CONTINUED
C
D
99
RADIO
DARK GRAY
19
SHELF SUPPORT
DARK GRAY
2
RIGHT NOSE
FRAME
DARK GRAY
FF
62
RADIO
DARK GRAY
CC
EE
AA
BB
65
RADIO
DARK GRAY
64
RADIO
DARK GRAY
5
RADIO SHELF
DARK GRAY
DD
8
PLATE
DARK GRAY
1
LEFT NOSE
FRAME
DARK GRAY
66
RADIO
DARK GRAY
20
TOP NOSE
FRAME
DARK GRAY
E
14
FORMER
DARK GRAY
4
FORMER
DARK GRAY
11
RIGHT WALL
DARK GRAY
105
CONTROL PEDALS
DARK GRAY
3
REAR BULKHEAD
DARK GRAY
10
LEFT WALL
DARK GRAY
Kit 5633 - Page 3
2
ROTOR ASSEMBLY
A B
21
ROTOR BLADE
SILVER
(PAINT OLIVE DRAB)
C
★82
HUB CONNECTOR
TOP
CHROME
★94
WISHBONE
CHROME
★83
HUB CONNECTOR
CHROME
21
ROTOR BLADE
SILVER
(PAINT OLIVE DRAB)
★94
WISHBONE
CHROME
★91
MAIN ROTOR
MAST HALF
CHROME
116
SLEEVE
SILVER
★90
MAIN ROTOR
MAST HALF
CHROME
45
CONTROL
D E
YOKE
SILVER
32
CONTROL
ARM
SILVER
46
CONTROL
LEVER
SILVER
★86
TRANSMISSION
HALF
CHROME
★87
TRANSMISSION
HALF
CHROME
34
LONG LINK
SILVER
32
CONTROL ARM
SILVER
REAR CONTROL
CONNECTOR
SHORT LINK
SILVER
GENERATOR
COVER
CHROME
33
ROD
SILVER
27
LINK
SILVER
26
★95
107
SHAFT
STEEL
NOTE: SLIDE SLEEVE DOWN SHAFT, AFTER THE ROTOR HALVES ARE
GLUED TOGETHER, SLIDE SLEEVE UP.
PLACE SOME VEGETABLE OIL ON MAST FOR EASIER ROTATION WITH THE
SLEEVE, DO NOT GLUE THE SLEEVE TO SHAFT OR MAST.
INSERT
SHAFT
ASSEMBLY
FROM STEP
C AS SHOWN
78
DECK
DARK GRAY
TRANSMISSION
110
RETAINER
DARK GRAY
NOTE: PRESS FIT INTO SLOT ON SHAFT
Kit 5633 - Page 4
3
ENGINE AND WINDOW ASSEMBLY
A B
12
REAR
FIREWALL
SILVER
41
ENGINE SUPPORT
SILVER
★85
ENGINE HALF
CHROME
★84
ENGINE HALF
CHROME
42
ENGINE SUPPORT
SILVER
15
FRONT
FIREWALL
SILVER
DECK WITH TRANSMISSION
SHOWN IN PLACE
BOTTOM
WINDOW
WINDSHIELD
LEFT BOTTOM
WINDOW
RIGHT WINDSHIELD HALF
137
RIGHT
CLEAR
141
LEFT
HALF
CLEAR
138
CLEAR
LEFT DOOR
WINDOW
LEFT TOP WINDOW
(PAINT TRANSPARENT
GREEN ON INSIDE SURFACE)
CLEAR
143
CLEAR
139
CLEAR
142
144
RIGHT DOOR
WINDOW
CLEAR
121
RIGHT FUSELAGE
SEE PAINT GUIDE
120
LEFT FUSELAGE
SEE PAINT GUIDE
140
RIGHT TOP WINDOW
(PAINT TRANSPARENT GREEN
LEFT FUSELAGE HALF
WITH COMPLETED DECK
CLEAR
ON INSIDE SURFACE)
111
SHAFT
OLIVE DRAB
SHOWN IN PLACE
4
129
SCOOP
OLIVE DRAB
56
RIGHT EXTERNAL
STORES RACK
OLIVE DRAB
47
ANTENNA
OLIVE DRAB
48
PITOT TUBE
OLIVE DRAB
129
SCOOP
OLIVE DRAB
EXTERNAL DETAIL ASSEMBLY
126
TOP BODY
RAIL
OLIVE DRAB
23
UPPER
ANTENNA
OLIVE DRAB
124
MAIN AIR
SCOOP
OLIVE DRAB
125
FRONT
ENGINE
COVER
OLIVE DRAB
51
RIGHT ELEVATOR
OLIVE DRAB
129
SCOOP
OLIVE DRAB
22
TAIL ANTENNA
OLIVE DRAB
24
TAIL ROTOR
SEE PAINT GUIDE
LEFT ELEVATOR
52
OLIVE DRAB
★89
TAIL ROTOR
CONTROL
CHROME
29
TAIL SKID
OLIVE DRAB
22
TAIL ANTENNA
OLIVE DRAB
28
SKID TIP
SEE PAINT GUIDE
25
SKID
SEE PAINT GUIDE
129
SCOOP
OLIVE DRAB
55
LEFT EXTERNAL
STORES RACK
OLIVE DRAB
128
FRONT BOTTOM
STIFFENER
OLIVE DRAB
127
REAR BOTTOM
STIFFENER
OLIVE DRAB
Kit 5633 - Page 5
5
WEAPON AND DOOR ASSEMBLY
LEFT SIDE
A
200
OUTER AMMO
CHUTE
INNER AMMO
43
LEFT CLASP
STEEL
TABS ON TOP
RIGHT SIDE
B
ROCKET TAIL CAP
(PAINT RECESSED AREAS
ROCKET POD
OLIVE DRAB
ROCKET NOSE PIECE
(PAINT SHADED AREA FLAT BLACK)
201
CHUTE
GUN MOUNT
FRONT HALF
OLIVE DRAB
★81
CHROME
FLAT BLACK)
30
HALF
★88
CHROME
37
✱
58
MACHINE
GUNS
STEEL
GUN MOUNT
REAR HALF
OLIVE DRAB
ROCKET POD
OLIVE DRAB
38
31
HALF
✱
✱
76
RETAINER
OLIVE DRAB
ROCKET POD HALF
OLIVE DRAB
GUN CARRIAGE
OLIVE DRAB
31
✱
✱
★81
ROCKET TAIL CAP
CHROME
(PAINT RECESSED AREAS
FLAT BLACK)
ROCKET POD HALF
50
ROCKET NOSE PIECE
(PAINT SHADED AREA
FLAT BLACK)
200
OUTER AMMO
CHUTE
30
OLIVE DRAB
MACHINE
GUNS
STEEL
★88
CHROME
39
GUN MOUNT
FRONT HALF
OLIVE DRAB
NOTE: BELTS FEED INTO BOX
58
UNDER THE SEAT AS SHOWN
IN THE ILLUSTRATIONS.
USE TWEEZERS AND FEED
END OF OUTER AMMO CHUTE
THROUGH SLOT IN LEFT SIDE
OF THE FUSELAGE AND INTO
FORWARD AMMO BOX.
HANDLE MODEL CAREFULLY
WHILE DOING THIS, SO AS NOT
TO DAMAGE IT.
FEED INNER AMMO CHUTE
THROUGH SLOT IN FUSELAGE
AND INTO REAR AMMO BOX.
CHUTE IS A SNUG FIT
THROUGH SLOT IN FUSELAGE
AND MUST BE PUSHED
THROUGH.
PRESS REMAINING ENDS OF
CHUTES INTO SLOTS IN GUNS
AS SHOWN.
INSERT CHUTES ON THE RIGHT
SIDE IN THE SAME MANNER AS
LEFT SIDE. BOTH CHUTES FIT
INTO THE REAR AMMO BOX.
49
GUN CARRIAGE
OLIVE DRAB
TABS ON TOP
✱
C
REPEAT FOR RIGHT SIDE
USING 136, 123, AND 93
76
RETAINER
OLIVE DRAB
40
GUN MOUNT
REAR HALF
OLIVE DRAB
44
RIGHT CLASP
STEEL
201
INNER AMMO
CHUTE
★93
DOOR HANDLES
CHROME
122
DOOR
OLIVE DRAB
135
DOOR WINDOW
CLEAR
Kit 5633 - Page 6
6
DECAL PLACEMENT
Kit 5633 - Page 7
6
DECAL PLACEMENT
CONTINUED
Kit 5633 - Page 8
Loading...