Page 1
This Ferrari 458 Italia is the ultra-
modern successor to the Ferrari
F430, although designed for the
street, it offers the boldness and
flair of a spirited thoroughbred
racing car. Its 4.5 liter V8 engine
offers incredible performance with
570 bhp and can reach a maximum speed over 200 miles per hour.
Your Revell model features an accurate sculptured body with highly
detailed multi-piece 4.5 liter 8-cylinder engine, a super detailed interier,
suspention, wheel and brake assembly plus positional front axle and
decals with authentic factory markings.
KIT 4912 85491200200
458 ITALIA
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
* OPTIONAL PARTS
* PIECES EN OPTION
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
* DECAL
* DECAL COMANIE
les solutions de fixage ou les solvants.
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* CEMENT TOGETHER
* A COLLER
This paint guide is provided to complete this kit
Ce guide de peintures est fourni pour reproduire le modèle
Aluminum
Flat Red
Gloss Red
Silver
Semi Gloss Black
Steel
Tan
Transparent Red
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
as shown on the box.
réduit qui apparaît sur la boîte.
Aluminium
Rouge mat
Rouge brillant
Argent
Noir satiné
Acier
Havane
Rouge transparent
* DO NOT CEMENT
* NE PAS COLLER
If you have any questions or comments, call our hotline at: (800) 833-3570
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85491200200), part number, description, your return address and phone number.
Revell Inc Elk Grove Village, IL. Copyright © 2011. All rights reserved.
or, please write to:
Visit our website: www.revell.com
Page 2
1
ENGINE ASSEMBLY
A A
2
RIGHT SIDE
ENGINE
ALUMINUM
1
LEFT SIDE
ENGINE
ALUMINUM
C
RIGHT VALVE COVER
LEFT VALVE COVER
(SHADED AREA SEMI
6
FLAT RED
(SHADED AREA SEMI
GLOSS BLACK)
5
FLAT RED
GLOSS BLACK)
ALUMINUM
7
GEAR BOX
COVER
ALUMINUM
B
D
9
RIGHT INTAKE
SILVER
3
ENGINE TOP
ALUMINUM
(SHADED AREA SEMI
GLOSS BLACK
8
LEFT INTAKE
SILVER
E
13
RIGHT EXHAUST
MANIFOLD
METALLIC SILVER
Kit 4912 - Page 2
4
ENGINE FRONT
ALUMINUM
(SHADED SEMI GLOSS BLACK)
RIGHT HALF SHAFT
12
GLOSS BLACK
(SHADED FLAT BLACK)
10
LEFT HALF SHAFT
GLOSS BLACK
(SHADED FLAT BLACK)
11
LEFT EXHAUST
MANIFOLD
METALLIC SILVER
F
14
MUFFLER
STEEL
Page 3
2
REAR SUSPENSION ASSEMBLY
A
17
RIGHT
REAR AXLE
ALUMINUM
2nd
1st
COMPLETED
ENGINE ASSEMBLY
15
CHASSIS
SEMI GLOSS BLACK
(SHADED AREA ALUMINUM)
16
LEFT
REAR AXLE
ALUMINUM
1st
2nd
B
21
LEFT REAR A-ARM
SEMI GLOSS BLACK
(SHADED AREA ALUMINUM)
RIGHT REAR A-ARM
(SHADED AREA ALUMINUM)
18
SEMI GLOSS BLACK
C
STEEL (SPRING AREA SEMI GLOSS
22
LEFT
REAR STABILIZER
ALUMINUM
RIGHT REAR STABILIZER
23
LEFT REAR STRUT
BLACK)
19
ALUMINUM
RIGHT REAR STRUT
STEEL (SPRING AREA SEMI GLOSS
20
BLACK)
PARTS SHOWN
IN PLACE
D
25
LEFT REAR
INNER FENDER
SEMI GLOSS BLACK
24
RIGHT REAR
INNER FENDER
SEMI GLOSS BLACK
Kit 4912 - Page 3
Page 4
3
28
TIE ROD
SEMI GLOSS BLACK
(SHADED AREA
FLATBLACK)
27
RIGHT
FRONT AXLE
ALUMINUM
26
LEFT
FRONT AXLE
ALUMINUM
FRONT SUSPENSION ASSEMBLY
BA
Heat tip of screwdriver and press on protruding end of
**
plastic pin
Chauffer la pointe de tournevis et appuyer sur la partie
**
saillante de l'extrémité en plastique
31
RIGHT FRONT
A-ARM
SEMI GLOSS BLACK
(SHADED AREA
ALUMINUM)
LEFT FRONT A-ARM
(SHADED AREA ALUMINUM)
29
SEMI GLOSS BLACK
*
C
RIGHT FRONT STRUT
STEEL ( SPRING AREA SEMI
32
GLOSS BLACK)
4
35
RADIATOR
SEMI GLOSS BLACK
LEFT FRONT STRUT
STEEL ( SPRING AREA SEMI
30
GLOSS BLACK)
D
34
RIGHT
FRONT
INNER FENDER
SEMI GLOSS BLACK)
RADIATOR ASSEMBLY
33
LEFT
FRONT
INNER FENDER
SEMI GLOSS BLACK)
Kit 4912 - Page 4
36
FAN
SEMI GLOSS BLACK
(SHADED AREA
STEEL)
Page 5
5
★37
RIGHT FRONT
OUTER WHEEL
CHROME
44
RIGHT FRONT
DISK BRAKE
GREY METALLIC
(SHADED AREA STEEL)
39
RIGHT FRONT
INNER WHEEL
ALUMINUM
WHEEL / TIRE ASSEMBLY
41
GREY METALLIC
(SHADED AREA STEEL)
INNER WHEEL
REAR TIRE
26, 27 OR 28
DECAL
FRONT TIRE
*
★46
RIGHT REAR
OUTER WHEEL
CHROME
26, 27 OR 28
RIGHT REAR DISK BRAKE
DECAL
48
RIGHT REAR
ALUMINUM
FRONT TIRE
42
LEFT FRONT
INNER WHEEL
ALUMINUM
LEFT FRONT DISK BRAKE
47
GREY METALLIC
(SHADED AREA STEEL)
26, 27 OR 28
DECAL
OUTER WHEEL
★40
LEFT FRONT
CHROME
*
45
LEFT REAR
INNER WHEEL
ALUMINUM
REAR TIRE
26, 27 OR 28
DECAL
LEFT REAR DISK BRAKE
(SHADED AREA STEEL)
★43
LEFT REAR
OUTER WHEEL
CHROME
38
GREY METALLIC
Kit 4912 - Page 5
Page 6
6
DASHBOARD ASSEMBLY
A C
53
STEERING
WHEEL
TAN
(SHADED AREA SEMI
GLOSS BLACK)
GLOSS
LIGHT
BLUE
GLOSS
RED
DECAL
GLOSS
GREEN
11
★57
PADDLE SHIFTERS
CHROME
(SHADED AREA SEMI
GLOSS BLACK)
LIGHT
GREY
56
STEERING
COLUMN
BOTTOM
TAN
(SHADED AREA SEMI
GLOSS BLACK)
55
STEERING
COLUMN
TOP
TAN
DASHBOARD
(SHADED AREA
B
59
BOTTOM
TAN
SEMI GLOSS
BLACK)
1, 2, 3 or 4
DECAL
60
DASHBOARD TOP
SEMI GLOSS BLACK
5, 6 or 7
DECAL
8, 9 or 10
DECAL
12
DECAL
59
DASHBOARD
BOTTOM
TAN
(SHADED AREA
SEMI GLOSS
BLACK)
13
DECAL
7
★64
AIRVENT
CHROME
★63
PEDALS
CHROME
INTERIOR ASSEMBLY
GLOSS REDSILVER SEMI GLOSS BLACK
62
CONSOLE
14
DECAL
TAN
INTERIOR TUB
(SHADED AREA
SEMI GLOSS
61
TAN
BLACK)
REAR
INTERIOR
PANEL
TAN
68
Kit 4912 - Page 6
Page 7
7
INTERIOR ASSEMBLY CONTINUED
53
RIGHT
SEAT FRONT
TAN
54
RIGHT
SEAT
SUPPORT
SEMI GLOSS
BLACK
15 or 16
DECAL
SEAT BACK
SEMI GLOSS BLACK
52
RIGHT
50
LEFT
SEAT BACK
SEMI GLOSS BLACK
15 or 16
DECAL
49
LEFT
SEAT FRONT
TAN
51
LEFT
SEAT
SUPPORT
SEMI GLOSS
BLACK
RIGHT DOOR PANEL
66
TAN
(SHADED AREA SEMI
GLOSS BLACK)
67
RIGHT DOOR
HANDLE
TAN
65
LEFT DOOR PANEL
TAN
(SHADED AREA SEMI
GLOSS BLACK)
Kit 4912 - Page 7
Page 8
8
BODY ASSEMBLY
BA
76
RIGHT
FRONT
FENDER
VENT
CLEAR
51
DECAL
39
DECAL
★75
RIGHT
HEADLIGHTL
CHROME
79
GRILLE
SEMI GLOSS BLACK
74
BODY
GLOSS RED
40
DECAL
★77
LEFT
HEADLIGHT
CHROME
81
RIGHT REAR
FENDER AIR
INTAKE
CLEAR
45
DECAL
48
DECAL
80
RIGHT SIDE
ROOF SCOOP
GLOSS RED
82
LEFT SIDE
ROOF SCOOP
GLOSS RED
47
DECAL
C
*
GLOSS RED
78
LEFT FRONT
FENDER VENT
CLEAR
73
ENGINE COVER
CLEAR
72
ENGINE COVER
PANEL
SEMI GLOSS BLACK
52
DECAL
46
DECAL
74
BODY
GLOSS RED
LEFT REAR FENDER AIR INTAKE
83
CLEAR
Kit 4912 - Page 8
Page 9
8
D
BODY ASSEMBLY CONTINUED
17
INTERIOR ROOF PANEL
84
TAN
DECAL
REAR VIEW MIRROR
85
SEMI GLOSS BLACK
70
SEMI GLOSS BLACK
SILVER
69
SEMI GLOSS
BLACK
REAR WINDOW
CLEAR
ELECTRONICS COVER
24
DECAL
71
ENGINE COMPARTMENT
SEMI GLOSS BLACK
(SHADED AREA ALUMINUM)
E F
UPPER DASHBOARD SPACER
88
SEMI GLOSS BLACK
89
WINDSHIELD
CLEAR
RIGHT SIDE WINDOW
87
CLEAR
(SHADED AREA
SEMI GLOSS BLACK)
LEFT SIDE WINDOW
86
CLEAR
(SHADED AREA
SEMI GLOSS BLACK)
Kit 4912 - Page 9
Page 10
9
BODY / CHASSIS ASSEMBLY
A
COMPLETED
INTERIOR ASSEMBLY
B
91
RIGHT
REAR PANEL VENT
CLEAR
44
DECAL
★90
EXHAUST TIPS
CHROME
(SHADED AREA FLAT BLACK)
43
DECAL
89
LEFT
REAR PANEL VENT
CLEAR
C
COMPLETED
BODY ASSEMBLY
COMPLETED
CHASSIS ASSEMBLY
D
DECAL
22
DECAL
ALUMINUM
18 OR 21
DECAL
23
DECAL
20
19
DECAL
35
DECAL
92
FUEL INJECTION
MANIFOLD
FLAT RED
(SHADED AREA
SEMI GLOSS BLACK)
Kit 4912 - Page 10
Page 11
10
FINAL ASSEMBLY
★96
LEFT MIRROR
FACE
CHROME
101
LICENSE PLATES
SEMI GLOSS BLACK
95
LEFT SIDE
MIRROR
GLOSS RED
RIGHT WINDSHIELD WIPER
110
SEMI GLOSS BLACK
93
RIGHT SIDE
MIRROR
GLOSS RED
RIGHT WINDSHIELD WIPER
109
SEMI GLOSS BLACK
1st
98
RIGHT
TAILLIGHT COVER
TRANSPARENT RED
★97
RIGHT
TAILLIGHT LENS
CHROME
99
RIGHT
BRAKE LIGHT
TRANSPARENT RED
B C
104
LEFT
TAILLIGHT COVER
TRANSPARENT RED
★103
LEFT
TAILLIGHT LENS
CHROME
1st
102
BRAKE LIGHT
TRANSPARENT RED
RIGHT
HEADLIGHT
COVER
CLEAR
RIGHT FRONT WINGLET
107
SEMI GLOSS BLACK
108
★94
RIGHT MIRROR
FACE
CHROME
100
CENTER
BRAKE LIGHT
TRANSPARENT RED
★111
EMBLEM
CHROME
LEFT FRONT WINGLET
106
SEMI GLOSS BLACK
105
LEFT
HEADLIGHT COVER
CLEAR
Kit 4912 - Page 11
Page 12
53, 55,57 or 58
(Do not dip in water, carefully cut decal out
and use white glue to attach)
44
38
36 3129
37
43
50 54, 56,57 or 58 49
32
34
40 39
41 42
25 25 33 30
11
DECAL PLACEMENT GUIDE
Kit 4912 - Page 12
Loading...