REVELL 4215 Instruction Manual

The 1968 Mustang GT fastback

was the most revered and wanted
design by the pony car enthu­siast. The long graceful hood,
sloping roofline and short bobbed
trunk made the Mustang appear
to be a sporty racing vehicle.
Your Revell '68 Mustang GT
fastback model has an opening
hood with a detailed V-8 engine,
optional Cobra Jet high perfor­mance package with drag rac­ing wheels and authentic factory
and period racing decal graphics.
Kit is molded in white, transpar­ent red and clear with chrome
plated parts and black vinyl tires.

KIT 4215 85421510200

'68 MUSTANG GT 2'N1

* REPEAT SEVERAL TIMES

* A REPETER PLUSIEURS FOIS

READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER

* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome
plated plastic.

* For better paint and decal adhesion, wash

the plastic parts in a mild detergent solution.
Rinse and let air dry.

* Check the fit of each piece before

cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas

to be cemented.
* Allow paint to dry thoroughly before

handling parts.
* Any unused parts may be discarded.

DECAL APPLICATION INSTRUCTIONS

1. Cut desired decal from sheet.

2. Dip decal in water for a few seconds.

3. Place wet decal on paper towel.

4. Wait until decal is movable on paper backing.

5. Place decal in position on model, face up and

slide backing away.

6. Press out air bubbles with a soft damp cloth.

7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any

excess adhesive.

8. Do not touch decal until fully dry.

9. Allow the decals 48 hours to dry before

applying clear coat.

NOTE: Decals are compatible with

setting solutions or solvents.

* OPTIONAL PARTS

* PIECES EN OPTION

* DECAL

* DECAL COMANIE

* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants,

laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant

de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.

DIRECTIVES D'APPLICATION DES AUTOCOLLANTS

1. Découper l'autocollant désiré de la feuille.

2. Tremper l'autocollant dans de l'eau pendant quelques secondes.

3. Placer l'autocollant mouillé sur une serviette en papier.

4. Attendez que l'autocollant puisse être déplacé sur son support

en papier.

5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.

6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.

7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au

séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.

9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

REMARQUE: Les autocollants sont compatibles avec

* ALTERNATIVE ASSEMBLY

* ENSEMBLAGE ALTERNATIVE

les solutions de fixage ou les solvants.

* CEMENT TOGETHER

* A COLLER

* REMOVE AND THROW AWAY

* A RETIRER ET JETER

This paint guide is provided to complete this kit

Ce guide de peintures est fourni pour reproduire le modèle

Gloss Red

Gloss White

Semi Gloss Black

Flat Black

Transparent Red

Turn Signal Amber

Aluminum

Silver

Steel

as shown on the box.

réduit qui apparaît sur la boîte.

* DO NOT CEMENT

* NE PAS COLLER

Rouge brillant

Blanc brillant

Noir satiné

Noir mat

Rouge Transparent

Ambre

Aluminum

Argent

Acier

If you have any questions or comments, call our hotline at: [phone]

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007

Be sure to include the plan number (85421510200), part number, description, your return address and phone number.

Revell Inc Elk Grove Village, IL. Copyright © 2008. All rights reserved.

or, please write to:

Visit our website: www.revell.com

1

ENGINE ASSEMBLY

A

26

RIGHT

ENGINE HALF

FORD ENGINE BLUE

RIGHT SIDE

C

54

STARTER

SEMI GLOSS

BLACK

D

EXHAUST

mANIFoLD

STEEL

H48

ALTERNAToR

CHROME

B

H53

VALVE CoVER

CHROME

35

25

LEFT

ENGINE HALF

FORD ENGINE BLUE

H50

34

AIR CLEANER

CHROME

CYLINDER HEADS

FORD ENGINE BLUE

28

WATER PUmP

FORD ENGINE BLUE

RIGHT oUTER

EXHAUST HEADER

SEMI GLOSS BLACK

FORD ENGINE BLUE

113

37

INTAKE mANIFoLD

FORD ENGINE BLUE

VALVE CoVER

CHROME

40

oIL FILTER

WHITE

27

oIL PAN

110

RIGHT INNER

EXHAUST HEADER

SEMI GLOSS BLACK

H52

CoBRA jET

109

AIR CLEANER

SEMI GLOSS BLACK

29

30

FAN

SEMI GLOSS BLACK

RIGHT SIDE

E F

H51

HEAT RISER

TUBE

CHROME

FAN BELT

ALUMINUM WITH

FLAT BLACK BELTS

Kit 4215 - Page 2

33

EXHAUST

mANIFoLD

STEEL

111

LEFT INNER

EXHAUST HEADER

ALUMINUM

ComPLETED

CHASSIS

SEMI GLOSS

ENGINE To

CHASSIS

18

BLACK

112

LEFT oUTER

EXHAUST HEADER

ALUMINUM

2

exhaust / suspension assembly

NOTE:

IF USING CObRA

jET VERSION YOU

DO NOT NEED THE

EXHAUST

H123

EXHAUST TIPS

CHROME

19

EXHAUST

ALUMINUM

FRONT

SUSPENSION

SEMI GLOSS BLACK

18

CHASSIS

SEMI GLOSS BLACK

21

3

116

RIGHT REAR

SHOCK PERCH

SEMI GLOSS BLACK

CObRA jET

108

RISER bLOCK

SEMI GLOSS BLACK

rear suspension assembly

115

LEFT REAR

SHOCK PERCH

SEMI GLOSS BLACK

117

SHORT

REAR

108

SHOCKS

WHITE

108

RISER bLOCK

SEMI GLOSS BLACK

107

AXLE SPACER

SEMI GLOSS BLACK

20

REAR AXLE

SEMI GLOSS BLACK

RISER bLOCK

SEMI GLOSS BLACK

118

LONG

REAR SHOCK

WHITE

108

RISER bLOCK

SEMI GLOSS BLACK

AXLE SPACER

SEMI GLOSS BLACK

118

LONG

REAR SHOCK

WHITE

107

Kit 4215 - Page 3

4

rAdiAtor / hoSe ASSeMBlY

SEMI GLOSS BLACK

5

24

RADIATOR

H101

WHEEL

CHROME

14

DECAL

39

RADIATOR HOSE

FLAT BLACK

wheel / tire ASSeMBlY

COBRA jET

REAR
DRAG

SLICK

METAL AXLES

REAR

114

WHEEL

BODY

COLOR

6

A

SEAT FRONT

SEMI
GLOSS
BLACK

C

7R

22

FIREWALL

SEMI GLOSS BLACK

interior ASSeMBlY

9B

SEAT BACK

SEMI GLOSS BLACK

H49

SHIFTER

CHROME

6

INTERIOR

SEMI GLOSS

BLACK

B

7L

SEAT FRONT

SEMI
GLOSS
BLACK

FRONT

H124

WHEEL

CHROME

9A

SEAT BACK

SEMI GLOSS

BLACK

23

MASTER CYLINDER

SEMI GLOSS BLACK

Kit 4215 - Page 4

6

interior assembly ContinUeD

COBRA jET

REAR SEAT

SEMI GLOSS BLACK

D

104

FOLDED

12

REAR

SEAT BACK

SEMI GLOSS BLACK

E

COBRA jET

ROLL BAR SUPPORTS

105

ROLL BAR

SEMI GLOSS BLACK

106

SEMI GLOSS BLACK

INTERIOR SIDE

SEMI GLOSS BLACK

16

LEFT

11

REAR SEAT

SEMI GLOSS BLACK

F

40

DECAL

13

DASHBOARD

SEMI GLOSS

BLACK

41

DECAL

102

STEERING WHEEL

SEMI GLOSS

BLACK

15

DECAL

14

STEERING

COLUMN

SEMI GLOSS

BLACK

17

RIGHT

INTERIOR SIDE

SEMI GLOSS BLACK

G

36

ENGINE BRACE

SEMI GLOSS BLACK

38
WASHER
BOTTLE

WHITE

16

DECAL

Kit 4215 - Page 5

7

front assembly

119

FRONT PAN

BODY COLOR

130

TURN SIGNAL

LENS

130

TURN SIGNAL

LENS

CLEAR

8

A B

REAR PANEL

BODY COLOR

H42

HEADLIGHT

BUCKETS

CHROME

120

HEADLIGHT LENS

CLEAR

rear assembly

CLEAR

66

HEADLIGHT

BUCKETS

HEADLIGHT

H42

CHROME

66

LENS

CLEAR

1

BODY

BODY COLOR

60

TAILLIGHT PANEL

TRANSPARENT RED

1

BODY

BODY COLOR

9

COBRA jET

hood / window assembly

103

HOOD

SCOOP

BODY COLOR

102

HOOD

BODY COLOR

2

HOOD

BODY COLOR

H122

REARVIEW

MIRROR

CHROME

65

WINDOWS

CLEAR

Kit 4215 - Page 6

10

INterIor / chAssIs to body AssembLy

11

SILVER

(BOTH SIDES)

SCREWS

NOTE: CAREFULLY HOLD

HOOD IN PLACE WHILE

ATTACHING SCREWS FOR

INTERIOR

1

BODY

BODY

COLOR

COMPLETED

CHASSIS
TO BODY

SCREW

FINAL AssembLy

LEFT MIRROR

CHROME

FIRST

H128

H121

RIGHT MIRROR

CHROME

H125

BACKUP LIGHT

CHROME

SILVER

(BOTH SIDES)

RED

(BOTH SIDES)

SILVER

AMBER

(BOTH SIDES)

H41

FRONT BUMPER

CHROME

H103

FOG LIGHT

LENS

CLEAR

H45

CAS CAP

CHROME

H125

BACKUP LIGHT

CHROME

H100

GRILLE

CHROME

20

DECAL

H46

REAR BUMPER

CHROME

19

DECAL

103

FOG LIGHT

LENS

CLEAR

SEMI GLOSS BLACK

Kit 4215 - Page 7

12

decal placement

Kit 4215 - Page 8