Revel CONCERTA User Manual

Concerta

Specifications

© 2008 Harman International Industries, Incorporated. All rights reserved.

M10 mounted on the optional
STANDM10 loudspeaker stand.

32" Screen Setup

50" Screen Setup

42" Screen Setup

Three different bases are included with the M10.

Raise the height of your M10 speakers to
match the height of your display on a shelf,
table or credenza.

Revel® Concerta™ On-Wall Loudspeakers
and Powered Subwoofer

M8 M10/C10 LCR8

Driver Complement: Dual 3" (75mm) Dual 3" (75mm) woofers, Six 3" (75mm) woofers,
woofers, dual 3" (75mm) midrange three 1" (25mm) tweeters
1" (25mm) tweeter drivers, 1" (25mm) tweeter

Crossover: 2-Way at 2.2kHz 2-1/2-Way at 400Hz 2-Way at 2.2kHz
and 2.2kHz

LF Extension: –3dB @ 110Hz –3dB @ 110Hz –3dB @ 110Hz
–6dB @ 100Hz –6dB @ 100Hz –6dB @ 100Hz
–10dB @ 90Hz –10dB @ 80Hz –10dB @ 90Hz

Sensitivity: 88dB 89dB 88dB
(2.83V @ 1m, 2π)

Impedance: 8 Ohms 8 Ohms 8 Ohms

Dimensions: 11-5/8" x 4-1/4" x 4-1/2" 22-15/16" x 4-1/4" x 4-1/2" 4-1/4" x 39-15/16" x 4-1/2"
(H x W x D) (296mm x 107mm x 113mm) (582mm x 107mm x 113mm) (107mm x 1015mm x 113mm)

Weight: 3.45 lb (1.6kg) 6.75 lb (3.1kg) 11.4 lb (5.2kg)

B120

Frequency Response: ±0.5dB in the pass-band

Low-Frequency –3dB at 36Hz, –6dB at 32Hz, –10dB at 29Hz
Extension (Anechoic):

Maximum Amplifier 20Hz – 150Hz with no more than
Output: 0.1% THD, 250W RMS, 300W dynamic

Low-Pass Crossover 50Hz – 150Hz, 24dB/octave, continuously variable
Frequencies:

Power Requirements: 120V AC @ 60Hz, 2A

Dimensions: 17-3/4" x 15-3/4" x 14"
(H x W x D) (450mm x 400mm x 356mm)
(including feet and grille)

Weight: 51 lb (23.2kg)

Revel, the Revel logo and Concerta are trademarks of Harman International Industries, Incorporated,
in the United States and/or other countries. Features, specifications and appearance are subject to
change without notice.

250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329

516.594.0300 www.revelspeakers.com
Part No. REVELCONCERTA8/08 Printed in USA 8/08

Introducing loudspeakers engineered to perform on walls,

not just hang on them.

ith appropriate hardware, it’s possible

W

to affix virtually any compact loudspeaker to
a listening room wall, and manufacturers
are free to promote any model of a certain
size and weight as “wall-mountable.” But
very few audio manufacturers have the
facilities and expertise needed to determine
just how their on-wall systems will sound
when actually placed on or near a wall.

The Revel
the straightforward, if immodest, goal of
building the world’s finest loudspeakers.
Revel engineers began by finding more
accurate ways of measuring sound

®

brand was founded in 1996 with

reproduction under laboratory conditions
that more perfectly replicate a wider range
of home listening environments, including
on-wall installations.

The performance of Revel Concerta
on-wall loudspeakers has been extensively
evaluated in a variety of on- and near-wall
installations through blind listening tests
in the Revel Multichannel Listening Lab.
Using proprietary 36-point anechoic
measurements, Concerta on-wall speakers
have been shown to deliver remarkably flat
frequency response across an exceptionally
wide listening area for clean, accurate
sound in real-world listening rooms. None
of the competing systems tested under
identical conditions performed as well.
Remarkably, Revel engineers could not
identify a single competing on-wall system
they considered suitable for on-wall use,
based on either laboratory measurements
or double-blind listening tests.

™

At a time when many consumers are
looking for audio systems to complement
their on-wall video displays, Concerta
on-wall loudspeakers are the clear choice
for anyone interested in serious sound.