Page 1
Thank you very much for choosing of two-way radio. This transceiver offers reliable, clear and
efficient telecommunication service. This transceiver adopts innovative DSP base processing
system to achieve high-fidelity voice processing and encryption. It is including the best stability
and great reliability as well as exterior smooth lines, novel, fashionable, nice timbre and long
distance communication design. is a cost-effective, multi-function handheld transceiver which
meets every walk of life needs.
We convinced that you will be satisfied with this transceiver’s quality and functions.
In order to full comprehend the various excellent functions and using maintenance of this
transceiver, please read the user manual carefully before using.
CAUTIONS
When programming the transceiver, first of all, read the factory initial data , and then rewrite the
frequency and signaling etc., otherwise errors may occur because of different frequency band etc.
Models apply to this manual
VHF/UHF FM Transceiver
Programming Software
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 2
Main Features
● Dual Band 、Dual Display、Dual Receive、（V/v, U/u, V/u, Two Way Voice Can Be Output
At The Same Time.
● Repeater Function（V/u Or U/v）One-Way Or Two-way Selection
● Pf1，Pf2 The Side Key Programmable
● Ani Identity Recognition
● Dtmf Dual Tone Multiple Frequency
● All Call, Group Call And Single Call
● Caller Id
● Remote Stun
● Remote Kill
● VOX
● CTCSS / DCS
● Wide/Narrow Band Select
● Urgent Alert
● High/low Power Select
● Double Ptt Function
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 3
Warning......................................................................................................................01
Unpacking and Checking the Equipment......................................................... ...............02
Battery Information................................................................................... ..... ............03
Care and Clearing........................................................................................................05
Accessory Installation........................................... . ... . .................................................06
Getting Acquainted......................................................................................................10
Operating Mode..........................................................................................................14
Menu Introduction.......................................................................................................16
Technical Specifications....................................... .......................................................28
CONTENTS
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 4
· Please read this manual carefully before using this transceiver.
· Please do not communicate or charge this transceiver in flammable,explosive and area
which transceiver communication is prohibited(such as oil station,gas station, airport etc.)
· Please do not operate this transceiver without licence in government laws banned areas.
· Please make sure this transceiver avoids the sunshine, and avoids to put it near any
heating device.
· Please make sure this transceiver avoids any dusty,humid and water splashed place,and
also avoids to put it on
unstable surface.
· If transceiver smells or smokes, please remove the battery pack from transceiver at once,
and then contact our
company or local dealer.
· The repair job of this transceiver is in the charge of professionals & technicals, selfdisassembly is prohibted
Warning
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 5
+-+
Unpacking and Checking the Equipment
Carefully unpack the transceiver. We recommend that you identify the items in the following
table before discarding the packing material. If any items are missing or have been damaged
during shipment, please notify your chierda dealer.
Standard accessories
antenna
battery charger
AC adapter
belt clip
user's manual
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 6
The battery is not charged at the factory, please charge it before using. Charge the battery for the first
time after purchase or extended storage (more than 2 months) may not bring the battery to its normal
operating capacity. After repeating fully charge/ discharge cycle for two or three times, the operating
capacity will reach the best performance. The battery life is over when its operating time decreases
even though it is fully and correctly charged. Replace the battery.
Battery Charger Type
Please use our company’s designated charger, other models may cause explosion and injure people.
Notice:
1、Do not shortcircuit our company designated charger. Never attempt to remove the casing from the
battery, we show no responsibility on the faulty caused by modifying freely without permission of our
factory
2、The ambient temperature should be between 0 and 40 in charging. Charging outside this range
may not fully charge the battery
3、Always switch off the transceiver equipped with a battery before charging. Otherwise, it will
interfere with correct charging
4、To avoid interfering the charging procedure, please do not cut off the power or take out the battery
during charging
5、When the battery is fulled but using time is getting short, it means the lift of battery is over,
please use a new battery.
6、Do not recharge the battery if it is already fully charged.
This may shorten the life of the battery or damage the battery
7、Do not charge the battery or transceiver if it is damp. Dry it before charging to aviod danger.
Battery Information
Notice for charging battery
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 7
WARNING: when keys or ornamental chains and other electric metals with the battery terminals,
the battery may cause damage or hurt bodies. If the battery terminal short circuit, it will generate a
lot of heat, please be careful when you bring or use the battery, please put battery or radio into
insulated container. Do not put it into metal container
How to charger the batter y
After installing the battery, if the radio displays low battery, please charge the battery.
Indicator
Red light
Green light
Status
charging
full charged
How to charge the battery
1、Take out the plug –pin of the charger, and then plug it into the AC power
2、And confirm the battery will connect with terminals of the charger well. Meanwhile the indication
light get orange, now it means to be charging
3、After 5 hours charging , the indication light will get green when the battery is full charged
CAUTION: Power-off the radio when charging
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 8
Care and clearing.
1 To keep away from hot place and direct sunlight
2、When using this transmitting , we recommend transmitting for 1minute then receiving for
4 minutes continuously transmitting for long time or working in high power will heat
the back of the transceiver. Do not place the transceiver’s hot back close to any plastics.
3、Please keep the radio dry. Do not wash radio with ardent chemicals and detergents
、
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 9
Attachment Installing
Installing/ Removing the Li-ion Batter y
Match the two grooves of the battery pack with the corresponding guides on the back of the
transceiver, and then push it. Press the battery and transceiver firmly together until the
release latch on the top of the transceiver locks. After hearing a “click” sounds, the
battery has been locked. To remove the battery, slide up the release latch and remove the
pack away from the transceiver
(Installation diagram) (Removing diagram)
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 10
MIC
Dual Band FM Transceiver
STEP
5.00K
DS
01
V
FO
Ca
l
l
MR
ME
N
U
Lock
S.Band
B
A
Step
1
2
3
4
5
6
9
8
7
*
#
0
P.save
VOX
Rev
TXP
SQL
RPT
Scan
N/W
TOT
Beep
TONE
S
M
TT
MIC
Dual Band FM Transceiver
STEP
5.00K
DS
01
V
FO
Ca
l
l
MR
ME
N
U
Lock
S.Band
B
A
Step
1
2
3
4
5
6
9
8
7
*
#
0
P.save
VOX
Rev
TXP
SQL
RPT
Scan
N/W
TOT
Beep
TONE
S
M
TT
Installing/ Removing the Antenna
Screw the antenna into the connector on the top of the transceiver by holding the antenna base
and turning it clockwise until secure. Turn the antenna anticlockwise to remove it.
(Removing diagram)
(Installation diagram)
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 11
Installing/Removing the Belt Clip
Place the belt clip to the corresponding grooves on the back of the transceiver for easy
carry. Push the buckle up, the belt clip can be removed.
(Removing diagram)
(Installation diagram)
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 12
Dual
Band
FM
Transceiver
ST
E
P
5
.
00K
D
S
0
1
V
FO
Ca
l
l
MR
M
EN
U
Lock
S.Band
B
A
Step
1
2
3
4
5
6
9
8
7
*
#
0
P.save
VOX
Rev
TXP
SQL
RPT
Scan
N/W
TOT
Beep
TONE
MIC
Installing Optional Speakers/ Microphone:
Uncover the MIC-SP cover and then insert the HS03 speaker/ microphone
Plug into MIC-SP Jack
(Installation diagram)
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 13
MIC
Dual Band FM Transceiver
STEP
5.00K
DS
01
VFO
Ca
ll
M
R
ME
N
U
Lock
S.Band
B
A
Step
1
2
3
4
5
6
9
8
7
*
#
0
P.save
VOX
Rev
TXP
SQL
RPT
Scan
N/W
T
OT
Beep
T
ONE
S
M
TT
Step / Channel Switch
Volume / Power Switch
MIC Input
Screen/ LCD Display
A/B Switch Key
Number Key
(be used for input
frequency and function)
Antenna
Status Indicator
Mic Output
Menu / Confirm Key
Exit / Channel Transform Key
Left Right Select Key
Getting started
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 14
PTT
PTT key:Press PTT
key, transceiver will be
in transmitting status,
release it to back to
receiving status
Pf1 Key:
When close dual standby,
it's default FM
Pf2 Key
Earphone
Jack/Programming Jack:
to connect earphone and
programming cable. When
programming cable is
connected, you can use
programming software by
computer.
Battery : to supply power
to transceiver.
11
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 15
Corresponding meaning
Signal and power indicator
Low power in current channel or edit channel indication
Open dual Standby function
Save battery function ON indication
VOX function ON indication
Offset frequency
Reverse frequency
Narrow band
Key lock
LCD Display Description
Icon
12
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 16
Icon
Tone Of indication
Battery capacity indication
Current edit channel or current transmit channel select CT indicator
Current edit channel or current transmit channel select DCS indicator
Tail frequency indication
Channel indicator
Channel busy
Corresponding meaning
、
Optional Signaling of Current edit channel or current transmit channel select DTMF indicator
When Standby,current edit channel indicator; Menu selection interface during menu operation
When Standby, current edit channel indicator; Menu set interface during menu operation
13
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 17
Working Mode
1、Frequency Mode (VFO)
Under this mode, you can rotate channel switch key to change frequency or direct input
frequency and store channel by pressing number keys.
2、MR Mode
When at least one channel is stored and under VFO mode, press[ ]key to enter MR
mode. Frequency will be displayed in the middle of screen, and channel number will be
displayed on the right side of frequency. When the transceiver name display function is on
and channel name has been edited, channel name will be displayed. Please refer to meau
operation NO.23, 24.
3、CH Mode
When at least one channel is stored, press[ ] key to turn on
transceiver, press keys to select, the screen will display RESET?/ MODE , and press MENU
key to confirm to enter CH mode. Channel number will be displayed and if display function is
on, channel name can be seen. Please refer to menu operation NO.23,24.
4、FM Radio Mode
This transceiver has FM radio function, 76.00-108.00Mhz. Press PF1 or PF2 key(program
by software) to enter and exit FM radio mode.
5、Double Function of PTT Key
When PF1 and PF2 has be sent as Sub-channel to transmit, PTT as main channel transmit,
VF
O
C
a
l
l
M R
VF
O
C
all
M
R
14
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 18
then PF1 and PF2 are in sub-channel transmit.
6、Menu Mode
Press[ ]key to enter menu mode, total 38 functions. Please refer to shortcut operation.
7、Restart Mode
Press [PTT] key and 1 key and VFO to enter restart mode, initialize all setting under frequency
mode.
Press [PTT] key and 2 key and FULL to enter restart mode, initialize all setting under channel
mode.
M
E
NU
Lock
15
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 19
STEP
RX.SAV
VOX
POWER
SQL
RELAY
N/W
TOT
BEEP
COLOR
VOT
D.WAIT
LED
VOICE
ANI
ROGER
AUTOLK
BCLO
S-D
OFFSET
5.00K/6.25K/.../50K
ON/OFF
OFF/1/2...5
HIGH/LOW
0-9
ON/OFF
WIDE/NARROW
30/60/.../270/OFF
ON/OFF
PURPLE/BLUE/ORANGE
0.5S/1.0S...3.0S
ON/OFF
ON/OFF/AUTO
CHINESE/ENGLISH/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
010.000….384.000
Step Frequency Select
Battery Save Mode
VOX Switch
Output Power Select
Squelch Level
Repeater Switch
Band Setting
Time-Out Timer
Prompt Voice Switch
Background Color
Vox delay Time(s)
Dual Standby Select
Background Light
Prompt Voice Indicator
Personal Identification Switch
TX Ends Prompt Voice Switch
Auto Key Lock
Busy Channel Lock Out
Offset Direction Setting
Offset Frequency Setting
Selectable Function Brief Introduction
NO.
Screen Display
Selectable Settings
Brief Introduction
16
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 20
34
35
36
37
38
OPNSET
PTT-ID
PONMSG
SCANS
DW
C-CDC
R-CDC
T-CDC
NAME
CHNAME
RPT-RL
RPT-SPK
RPT-PTT
RPT-MOD
VOL-MOD
DST
TX.SEL
STE
FULL/DC/MSG
OFF/SOT/EOT/BOTH
------CO/SE/TO
ON/OFF
OFF/67.0/69.3/.../D754I
OFF/67.0/69.3/.../D754I
OFF/67.0/69.3/.../D754I
ON/OFF
-------
ON/OFF
ON/OFF
DOUBLE/SINGLE
MAIN/SUB/OFF
ON/OFF
EDIT/BUSY
ON/OFF
0.5S/1.0S/.../4.0S
Open Mode Set
Push-To-Talk ID Set
Power On Message Edit
Scan Mode
Monitoring Transceiver When FM Radio is on
CTCSS / DCS Set
Receiving CTCSS / DCS Code Set
Transmitting CTCSS / DCS Code Set
Channel Name Display Edit
Channel Name Edit
Repeater Transmitting Delay Set
Repeater Speaker Set
Repeater PTT Switch Set
Repeater Mode
Volume Mode Set
DTMS Side Signalling Switch
Priority Transmitting Channel Set
Sound Tail Elimination Set
NO.
Screen Display
Selectable Settings
Brief Introduction
17
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 21
VF
O
C
all
M
R
Shortcut Operations
1：Short press[ ]to change main channel
2：Short press to switch VFO model and MR model
3：Press PPT and at the same time to open the radio , reset all setting about VFO model
4：Press PPT and at the same time to open the radio,reset all setting about VFO
model and MR model
5：Long press to switch single receive or dual receive
6：Long press to lock the key, and long press again to unlock the key
7：Long press to enter saved DTMF code
8：Long press to enter scan model
[ ]
[ ]
[ ]
[ ]
[ ] [ ]
[ ]
[ ]
Menu Setting Methods:
1：When in standby, press[ ]key to enter menu operation, LCD screen displays "MENU".
2：Rotate the band switch to change menu, enter to set when indicator display menu
3：press[ ]to confirm and enter ,Rotate the band switch to select
4：When finish selection, press[ ]key to confirm.
5：Press[ ]key twice to exit menu setting, and return to standby situation.
S.Band
B
A
Step
1
2
P.save
S.Band
B
A
MEN
U
Lock
M
E
N
U
Lock
V
F
O
Ca
l
l
M R
#
Scan
M
EN
U
Lock
MEN U
Lock
ME
NU
Lock
V
F
O
Ca
ll
M R
18
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 22
Step
1
2
P
.save
3
VOX
4
TXP
5
SQL
6
RPT
7
N/W
MEN
U
Lock
MEN U
Lock
MEN
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
STEP
5.00K
DS
01
RX.SAV
ON
DS
02
VOX
OFF
DS
03
POWER
HIGH
DS
04
SQL
4
DS
05
RELAY
OFF
DS
06
N/W
WIDE
DS
07
MEN
U
Lock
MEN U
Lock
MEN
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
MEN
U
Lock
MEN U
Lock
MEN
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
V
FO
C
a
l
l
M
R
V
FO
C
a
ll
MR
VFO
Ca
l
l
M
R
VF
O
Cal
l
MR
VF
O
Cal
l
M
R
VFO
Cal
l
M
R
VF
O
Call
MR
1 Step Frequency
Can select 5K/6.25K/10K/12.5K/20K/25K/50K
step frequency, input frequency range is
related to channel step frequency.If the
entered frequency range does not match
the step frequency range, the input
frequency is invalid
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Shortcut Operations
2 Battery
Save Mode
Select ON means transceiver is in battery
save mode,Off means close battery save
mode.
VOX level setting have 0-5 levels to selection,
the level more high, VOX sound is low.
3 VOX Switch
4 Output Power
Select
HIGH means High power, LOW means low
power.When select low power, the lcd screen
will display “L
5 Squelch Level
Adjust squelch level, higher level means
deeper squelch。
6 Repeater Switch
Select ON is into repeater mode, OFF is exit
repeater mode.
7 Band Setting
Wide band is WIDE, narrow band is Narrow.
19
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 23
8 Time-O ut Timer
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
VF
O
Cal
l
M
R
MEN
U
Lock
MEN
U
Lock
MEN
U
Lock
VFO
Ca
l
l
M
R
ME
NU
Lock
ME
NU
Lock
ME
NU
Lock
V
FO
C
a
ll
MR
ME
NU
Lock
ME
NU
Lock
ME
NU
Lock
V
FO
C
a
ll
MR
M
EN
U
Lock
M
EN
U
Lock
M
EN
U
Lock
VF
O
Cal
l
M
R
ME
NU
Lock
ME
NU
Lock
ME
NU
Lock
V
FO
C
a
ll
MR
ME
NU
Lock
ME
NU
Lock
ME
NU
Lock
V
F
O
C
a
ll
MR
M
E
NU
Lock
M
E
N
U
Lock
M
E
NU
Lock
V
F
O
C
all
MR
When beyond the setting time,transceiver
will limited transmitting and send out
beep tone.
8
TOT
9
Beep
Step
1
Step
1
Step
1
Step
1
Step
1
Step
1
2
P
.save
3
VOX
4
TXP
5
SQL
TOT
30
DS
08
BEEP
ON
DS
09
COLOR
PURPLE
DS
10
VOT
1.OS
DS
11
D.WAIT
ON
DS
12
LED
AUTO
DS
13
VOICE
CHINESE
DS
14
ANI
OFF
DS
15
0
TONE
Step
1
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
9 Promp t Voice
Switc h
Prompt voice is a indicator of transceiver operate,
Beep function is a kind of prompt voice function
when transceiver operation, fault operations or F
ault condition. Select ON means prompt Voice
is On, OFF means off this function.
10 Background Color
The Background Color of this transceiver can
select orange, blue and purple 3 colors.
11 Vox delay
Time(s )
IN VOT mode can protect the tail sound of
transmitter can be send out successful.
12 Dual S tandby
Selec t
Select ON means open dual band receive,
OFF means close dual band receive.
13 Back ground
Light
AUTO means automatic, ON means the
Background Light on all the time, OFF means
close screen light.
14 Prom pt Voice
Indic ator
CHINESE means prompt voice is Chinese ,
ENGLISH means prompt voice is English.
15 Autom atic
Numbe r Identifi cation
ON means the identity code is open,
OFF is means close.
20
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 24
M
E
NU
Lock
MEN U
Lock
MEN U
Lock
MEN U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
ME
NU
Lock
M
E
NU
Lock
M
E
NU
Lock
VF
O
Call
MR
ME
NU
Lock
V
F
O
C
all
MR
MEN
U
Lock
VFO
Ca
l
l
M
R
MEN
U
Lock
V
FO
C
a
l
l
M
R
M
E
N
U
Lock
ME
NU
Lock
VF
O
Cal
l
MR
V
FO
C
a
ll
MR
ME
NU
Lock
V
F
O
C
all
MR
M
E
N
U
Lock
VF
O
Cal
l
M
R
MEN U
Lock
M
E
N
U
Lock
MEN
U
Lock
MEN U
Lock
M
E
N
U
Lock
M
E
NU
Lock
MEN U
Lock
ROGER
OFF
DS
16
AUTOLK
OFF
DS
17
BCLO
OFF
DS
18
S-D
OFF
DS
19
OFFSET
000.000
DS
20
OPNSET
DC
DS
21
PTT-ID
OFF
DS
22
PONMSG
_______
DS
23
Step
1
6
RPT
Step
1
Step
1
Step
1
7
N/W
8
TOT
9
Beep
2
P.save
0
TONE
2
P.save
Step
1
2
P
.save
2
P.save
2
P.save
3
VOX
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
“+”indicates transmitting frequency is higher
than re ceiving freq ue ncy“-”i nd icate s
transmitting frequency is lower than receiving
frequencyOFF to close this function
16 Roger Prompt Tone
17 Keypad Lock
18 Busy Channel Lockout
19 Frequency Shift
Direction
20 Offset Frequency
21 Open Mode Set
23 Power On Message
Edit
22 PTT-ID Set
ON to start,OFF to close
AUTO Indicates that the keypad is automatically
locked when there is no operation on the radio
ON to start keypad lock,OFF to close keypad lock
ON indicates that transmitting is forbidden when
receiving signals. OFF to close this function
Use keypad input the offset frequency
“Full”indicates full screen displays,“DC”
indicatesbattery voltage display. “MSG”
indicates power on message display(please
refer to power on message edition)
OFF indicates close PTT-ID code. SOT indicates
transmit PTT-ID code when press transmit key.
EOT indicates transmit PTT-ID code when release
transmit key. BOTH indicates transmit PTT-ID
code both press/release transmit key.
Press [*]/[＃] to select character position,rotate
channel indicator knob to select characters
21
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 25
ME
NU
Lock
2
P.save
4
TXP
5
SQL
2
P.save
6
RPT
2
P
.save
7
N/W
2
P
.save
8
TOT
2
P.save
9
Beep
2
P
.save
0
T
ONE
3
VOX
Step
1
3
VOX
M
E
N
U
Lock
M
E
N
U
Lock
MEN U
Lock
MEN
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
M
E
N
U
Lock
0.5s~4.5s optional
M
E
NU
Lock
MEN U
Lock
V
FO
C
a
ll
M
R
M
E
N
U
Lock
M
EN
U
Lock
MEN U
Lock
MEN U
Lock
MEN
U
Lock
M
E
NU
Lock
ME
NU
Lock
MEN
U
Lock
M
EN
U
Lock
VFO
Ca
l
l
M
R
VFO
Cal
l
M
R
MEN
U
Lock
V
FO
C
a
ll
M
R
M
E
N
U
Lock
VF
O
Cal
l
M
R
M
E
N
U
Lock
VF
O
Cal
l
MR
M
E
N
U
Lock
VF
O
Cal
l
MR
ME
NU
Lock
V
FO
C
a
ll
MR
SCANS
CO
DS
24
DW
ON
DS
25
C-CDC
OFF
DS
26
R-CDC
OFF
DS
27
T-CDC
OFF
DS
28
CHNAME
_______
DS
30
RPT-RL
1.05
DS
31
NAME
ON
DS
29
Same operation as setting Power On
Character String.
24 Scan M ode
25 Moni toring
Transc eiver
When FM R adio is on
26 CTCS S/DCS Set
27 Rece iving
CTCSS /DCS code se t
28 Trans mitting
CTCSS /DCS code se
29 Chan nel Name
Displ ay Edit
30 Chan nel Name
Edit
31 Repe ater
trans mitting De lay Set
Press 【*】/【＃】 key to select character
position,rotateChannel knob to select characters
ON to start channel name display , OFF
indicates to close channelName display
Press【*】key to select CTCSS/DCS, press
【#】 to select DCS positive and negative code.
Rotate channels knob to select the required
CTCSS/DCS code. OFF to close this function
Press【*】key to select CTCSS/DCS, press【#】
to select DCS positive and negative code. Rotate
channels knob to select the required CTCSS/DCS
code. OFF to close this function
Press【*】key to select CTCSS/DCS, press【#】to
select DCS positive and negative code. Rotate
channels knob to select the required CTCSS/DCS
code. OFF to close this function
ON indicates that listening to FM radio While
receiving signals, OFF indicates that listening to
FM radio while stop receiving signals
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
22
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 26
MEN
U
Lock
M
EN
U
Lock
MEN
U
Lock
ME
NU
Lock
M
E
NU
Lock
ME
NU
Lock
ME
NU
Lock
RPT-SPK
ON
DS
32
MEN
U
Lock
MEN
U
Lock
VFO
Ca
l
l
MR
M
EN
U
Lock
M
EN
U
Lock
VFO
Ca
l
l
MR
MEN
U
Lock
ME
NU
Lock
M
E
NU
Lock
ME
NU
Lock
ME
NU
Lock
M
E
N
U
Lock
VF
O
Cal
l
M
R
M
E
N
U
Lock
VF
O
Cal
l
M
R
M
E
N
U
Lock
VF
O
Cal
l
M
R
M
E
N
U
Lock
VF
O
Cal
l
M
R
M
E
NU
Lock
VF
O
C
all
M
R
ON to indicates aster start repeater,radio
speaker also start monitoring function OFF
indicates close speaker monitoring function
3
VOX
2
P.save
3
VOX
3
VOX
3
VOX
4
TXP
3
VOX
5
SQL
3
VOX
6
RPT
3
VOX
7
N/W
3
VOX
8
TOT
RPT-PTT
ON
DS
33
RPT-MOD
DOUBLE
DS
34
VOL-MOD
OFF
DS
35
DST
ON
DS
36
TX.SEL
EDIT
DS
37
STE
ON
DS
38
32 Repe ater
Speak er set
33 Repe ater PTT
Switc h Set
34 Repeater Mode
35 Volume Mode Set
36 DTMF Side
Signalling Switch
37 Priority Transmitting
Channels Set
38 Sound Tail
Elimination Set
ON indicates PTT transmitting is still available
while under repeater mode. OFF indicates
close this function
SINGLE relay mode is signal direction, means A
frequency receiving while B frequency transmitting.
DOUBLE is dual direction,means A frequency
receiving while B frequency transmitting,Also B
frequency receiving while A frequency transmitting
MAIN indicates the main frequency sound is louder
when receiving SUB indicates the sub frequency
sound is louder when receiving . OFF indicates both
main and sub frequency have same sound
When select ON, DTMF tone can be heard, OFF
Indicates DTMF tone is not being monitored
EDIT indicates priority transmit at main frequency
channel, BUSY indicates priority transmit at current
frequency channel which is receiving.
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
23
Find Tail Eliminator Type, select ON to open this
function, select OFF to close tail tone.
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 27
Other Functions Operation Instruction
Start FM Radio
1.Press PF1/PF2 buttons to start FM radio
2.Input FM radio frequency by keypad directly
3.If local FM Radio frequency is unknown, then scan local FM Radio frequency to solve this problem.
Method: press PF1/PF2 buttons to start FM Radio press【 】key 2s to start FM Radio Scan, and scan
will stop when a FM Radio signal is detected,then press【 】to exit scan mode
4.FM Radio Storage
Method: Input the required FM radio frequency first Press【 】 key press【 】key 2s , when a
prompt sound is heard, Rotate channels knob to select the required storage channels press【 】key
2s, when a prompt sound is heard, that means storage successful press【 】key to exit.
→
→ →
→
→
Notice: PF1/PF2 buttons have been set as FM Radio hot key on software
#
Scan
#
Scan
M
E
N
U
Lock
V
F
O
C
all
M
R
V
F
O
C
all
M
R
VF
O
Ca
l
l
M R
M
E
N
U
Lock
0
T
ONE
M
EN
U
Lock
#
Scan
Emergency Alarm
Press【 】key Press【 】to start emergency alarm, transceiver speaker will beep alarm sound,
and also start remote alarm at the same time.
→
Notice:IF PF1/PF2 buttons have been set as alarm function, then press PF1.PF2 buttons to quick start emergency alarm.
Keypad lock start/close
To start/close keypad lock, press key 2s when in standby time.
Scan
Press【 】2s to start scan
Channel Storage
Under full frequency mode, input all the required frequencies by keypad, and also set CTCSS/DCS code,
【 】
24
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 28
then press【 】key shortly→ press【 】key 2s, when a prompt sound is heard→ rotate channels knob to
the required channel→press【 】 key 2s, when a prompt sound is heard, that means storage successful→
press【 】key to exit.
Delete stored channels or FM Radio channels
Under channel mode, select required channel→rotate power knob→press【 】to start transceiver, →
press【 】 Key to confirm delete.
Notice: if want to delete stored FM radio channels, please do it under FM radio channel mode
How to Use Single Tone Pulse Frequency
Press PF1/PF2 buttons which have been set single tone pulse function without release, transceiver will
automatically transmit single tone pulse signal to start repeater, release PF1/PF2 buttons after repeater starts, and
then press PTT button to start repeater communication
Notice: Some repeaters need a single tone pulse signal to activate it , if the repeater has started, that activating
pulse is not needed. Single Tone Pulse signal has 4 types, frequencies, including 1750Hz, 2100Hz, 1000Hz,
1450Hz , the frequency can be set to PF1/PF2 buttons by software
How to use repeater
This transceiver has own repeater function without working with other repeaters. the methods are as follows:
1.Press【 】key→press【 】key→ rotate channel knob to select ON→press【 】key to confirm start
repeater function→set repeater frequency→select menu 31 to set repeater delay time→select menu 34 to select
single direction repeater or dual direction repeater.
2.If want to set repeater monitoring function on this transceiver, press【 】key→rotate channel knob to select
menu 32 to start repeater monitor function
3.To store repeater channel frequency , please refer to channel storage
All call, Group call, Single call and Caller ID
This transceiver has DTMF decode and encode function, all call, group call, single call and caller ID are available
without other communicate devices
ME
NU
Lock
VF
O
Ca
l
l
M R
V
F
O
Ca
ll
M R
V
F
O
Call
M
R
M
E
N
U
Lock
DEL
DS
MEN U
Lock
ME
NU
Lock
6
RPT
M
E
NU
Lock
MEN U
Lock
25
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 29
For Example:
There is a group with 15 people in 3 teams, each team code is ※，and each group member ID are :
5 people in Team 1, each ID :
A B C D E
121 122 123 124 125
5 people in Team 2, each ID :
131 132 133 134 135
5 people in Team 3, each ID :
141 142 143 144 145
If want to single call A member in team 1, then transmit 121 code. Only member A can hear this call,
others can not hear. If transmit 12* code, then all members in team1 can hear this call, but team 2 and
team 3 can not hear. If transmit 1**, then all 3 teams members can hear the call
Caller ID
If transmitting code while transmitting caller ID, then call ID will be displayed on receiver's transceiver.
(Example) If A member in team 1 call B member, member A transmits 122*121, then member B
transceiver will display member A ID 121, this is Caller ID
↓ ↓ ↓ ↓ ↓
A B C D E
↓ ↓ ↓ ↓ ↓
A B C D E
↓ ↓ ↓ ↓ ↓
26
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 30
Remote Kill/Remote Kill wakeup
Transmit remote kill code (such as 1234), transmit 1234 code then that transceiver can not
transmitting and receiving.
To wakeup that transceiver , only need to transmit remote kill code 1212+# code.
Transmit DTMF Code Manually
This transceiver can transmit DTMF code manually, when this transceiver is transmitting,
input 0-9ABCD*# on the keypad, then the corresponding codes will be transmitted. PF1
corresponds A code,【 】key corresponds B code, key corresponds C code,
and key corresponds D code
Transmit stored DTMF code
Press key 2s or short press programmed PF1/PF2, enter DTMF code groups, rotate
channel knob to select DTMF code groups, press PTT to transmit.
【 】
【 】
【 】
VF
O
C
al
l
M
R
S.Band
B
A
MEN U
Lock
V
F
O
C
al
l
M
R
Remote Stun/Remote Stun wakeup
Transmit remote stun code (such as 1212), transmit 1212 code then that transceiver can be only receiving
To wakeup that transceiver , only need to transmit remote stun code 1212+# code
27
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 31
100*60*36mm
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 32
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Page 33
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
Loading...