Page 1
ReSound Sure Fit Receiver Guide
MP
Fitting Range - Closed
Frequency ( Hz)
Fitting Range - Closed
Frequency ( Hz)
Fitting Range - Closed
Frequency ( Hz)
dB HL
LP
Fitting Range - Closed
Frequency ( Hz)
dB HL
MP
Fitting Range - Closed
Frequency ( Hz)
dB HL
Fitting Range - Closed
Frequency ( Hz)
dB HL
Fitting Range - Closed
Fitting Range - Closed
Fitting Range - Closed
Frequency ( Hz)
dB HL
Multiple receiver options enable ReSound Receiver-In-The-Ear (RIE) hearing aids to
accommodate a wide range of hearing losses.
Model
Batter y
LP
Low power
receiver
MP
Medium power
receiver
61-DRW Z
Silver-zinc 312
and ReSound LiNX
61
312
ReSound LiNX 3DTM
Frequency ( Hz)
dB HL
Frequency ( Hz)
dB HL
TM
2
62
13
62
312
ReSound EnyaTM
Frequenc y (Hz)
dB HL
Frequenc y (Hz)
dB HL
HP
High power
receiver
UP
Ultra power
receiver
Frequenc y (Hz)
dB HL
Frequenc y (Hz)
dB HL
dB HL
Page 2
Changing a Sure Fit receiver
15502500
65
400402000-15.03-Rev.A
61
ReSound LiNX 3DTM
Rechargeable
61-DRWZ
Insert one end of the
multi-tool into the
opening of the
clear receiver lock
just above the top
microphone.
PN 17327600
Using the multi-tool as a lever, lift
the receiver lock gently
until it protrudes from
the hearing instrument.
Note: the receiver
lock does not
need to be
completely
removed.
Pull the receiver out to remove it from
the hearing instrument.
ReSound LiNX 3DTM
and ReSound LiNX
TM
2
Insert the tip of the blue tool
into the small slot on the
housing, behind
the receiver.
PN 0490-059
Using the blue tool as a lever,
swing the blue tool out and
away from the hearing
instrument to unlock
the microphone
cover.
Pull the receiver down & out to
remove it from the hearing
instrument.
ReSound LiNX 3DTM
61 62 62
and ReSound LiNX
TM
2
Insert the tip of the white tool
into the small slot in
the receiver locking
mechanism.
PN 15502500
Lower the tool at the angle
shown, and pull the receiver lock
ing mechanism up.
ReSound Enya
Insert one end of the multi-tool
into the cut-out at the bottom
of the locking
mechanism.
Using the multi-tool as a lever, lift
-
the bottom of the locking mecha
nism to unlock the
TM
PN 17327600
-
receiver tube.
NOTE: Do not attempt to
disconnec t the locking
Pull the old receiver tube straight
out to remove it from the hearing
instrument.
mechanism from the
hearing instrument.
Pull the old receiver tube straight
out to remove it from the hearing
instrument.
To insert a new receiver, push the
new receiver tube until it is fully
seated.
Lock the receiver tube in place by
pushing the clear receiver lock into
the hearing instrument until it is
flush.
Attach a dome or custom
Micromold to the receiver.
Manufacturer according to FDA:
ReSound
North America
8001 E. Bloomington Freeway
Bloomington, MN 55420
1-800-248-4327
resoundpro.com
ReSound
Government Services
8001 E. Bloomington Freeway
Bloomington, MN 55420
1-8 00-392-9932
resound.com/governmentservices
To insert a new receiver, push the
new receiver tube in until it is fully
seated.
Lock the receiver tube in place by
clicking the locking
mechanism closed.
Attach a dome or custom
Micromold to the receiver.
Manufacturer according to Health Canada:
ReSound
Canada
303 Supertest Road
Toronto, Ontario M3J 2M4
1-888-737-6863
resoundpro.com
To insert a new receiver, push the
new receiver tube in until it is fully
seated.
Lock the receiver tube in place by
firmly pushing down the
locking mechanism
until snugly in place.
Attach a dome or custom
Micromold to the receiver.
To insert a new receiver, push the
new receiver tube in until it is fully
seated.
Lock the receiver tube in place by
clicking the locking mechanism
closed.
Attach a dome or custom
Micromold to the receiver.
MK604484
MK604484 REV. E 2017.06
Loading...