Resolution RE616 User Manual

RE616 Wireless Siren
Features
Remote Wireless Siren
Works RE6100 panel
Siren cadence synchronized to panel
Automatically follows panel beep volume
Wall-powered, with backup power on CR123A battery
Cover tamper
Unparalleled wireless range
Low Battery indication
3x4x1.25 inches
Key Instructions
ENROLLMENT
Open the Siren battery door, giving access to the programming switches. Power the Siren with its battery.
Enrolling RE6100 Panel into Siren – to send panel siren signals to Siren
1. Put Siren Function in ENROLL Mode.
2
1
1 2
ENROLL
RUN
2. Put the RE6100 into enroll mode.
The Siren will beep 4 times, indicating enrollment.
3. Put Siren Function Switches in RUN Mode.
ENROLL
Operation
Alarm
Supervision
Tamper
1 2
1 2
Siren follows panel alarm pattern.
Siren sends supervisory signals to panel IF:
Siren has AC power. AND, if Special Transmitter is enrolled in Siren… Siren has heard signal from Special Transmitter in previous 60 minutes.
When cover is opened on Siren.
RUN
RE616 Wireless Siren Instructions.doc Page 1 of 2 31-Dec-14
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Siren Specifications
Supervisory Time 64-68 minutes Alarm Sound Intensity 85dB, minimum, at 1m Receiver: Dual antenna diversity Transmitter> Dual antenna Dirersity Electrical Connection: US 2-prong Electrical outlet blades Mounting hardware: Secure with outlet plate mounting screw Backup Battery Life: 48 hours cumulative, non-rechargeable Back-up Battery: CR123A 1550 mAH Temperature Range: 0F to 120F Housing dimensions: 3x4x1.25 inches
Specifications subject to change without notice.
Warranty
Resolution Products, Inc. will replace products that are defective in their first five (5) years.
FCC Notice
IC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment.
FCC ID: U5X-RE616 (Siren)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)This device may not cause interference, and (2)This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC: 8310A-RE616 (Siren)
RE616 Wireless Siren Instructions.doc Page 2 of 2 31-Dec-14
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Loading...