Resolution RE403F User Manual

Wireless
Press Red button
for Alarm
SOLID LIGHT on button press = GOOD battery.
BLINKING LIGHT on button press = LOW battery
Security Solutions
RE403V Visonic®-Compatible Panic
Features
Portable device for emergency initiation of system.
Single, red button with comfortable feel.
Fully sealed, water resistant housing.
Strong, reliable RF signal.
Comes with comfortable, elastic band for easy removability.
4-6 year battery life.
Key Instructions
Enrolling:
Refer to the AMBER SELECT control unit installation
manual.
Operation
User presses button in emergency. Unit will send low battery signals. Unit sends supervisory signals twice daily.
Specifications
Compatibly Replaces: MCT-212 AMBER Button Function: Press=Fault, Release=Restore Supervisory signals: sent every 12 hours (although panel doesn’t listen for them). Battery: Sealed in unit; not replaceable Low battery signal sent upon detecting low battery Water resistant: Not submersible, but tested to 1 meter depth Temperature Range: 0F to 120F Housing dimensions: 1.5x1.2x0.6 inches
Specifications subject to change without notice.
Notices
“GE”, “Honeywell”, “DSC”, and “Visonic” are trademarks owned by General Electric Company, Honeywell International Inc., Tyco Safety Products Canada LTD, and Visonic, LTD respectively.
Resolution Products, Inc. products will function with one of either GE, DSC, Visonic or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation.
Warranty Resolution Products, Inc. will replace products that are defective in their first two (2) years.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment.
FCC ID: U5X-RE403F
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC: 8310A-RE403F
RE403V_Visonic-Compat_Panic-RevF+ Page 1 of 2 22-Jan-14
www.ResolutionProducts.com
RE403V_Visonic-Compat_Panic-RevF+ Page 2 of 2 22-Jan-14
www.ResolutionProducts.com
Loading...