Resolution RE252 User Manual

PINpad

Lynx Touch

Lynx Touch

Shoul

d be

PINpad

Lynx Plus

Lynx Plus

Lynx Plus

Lynx Plus

PINpad

Wireless
Security
Solutions

RE252 Honeywell Compatible PINpad™

Features

• Secure, 4-digit Code to disarm

• 1-button arming

• Red/Green LED arming feedback

• Small, yet comfortable keypad

• Mounts on wall via VHB® tape, or screws

• Secure for carrying in purse or mounting on car visor

• More securely replaces Honeywell 5878 6-button Wall Touchpad

• 4-6 year battery life on CR2032 battery.

Key Instructions

• Do NOT use this product for 2GIG panels. Use the RE252

• PIN Code programming

• Enrolling:

• Specific Control Panel Programming follows here…

Lynx Touch 5100:

Programming  Keys  Add New

Default access code is “1234”.
To change access code:

1. Enter current 4-digit access code.

2. Within 4 seconds, press and hold the “1” and “3” keys

simultaneously. After 3 seconds, Red LED will be lit.

3. Enter new 4-digit access code. After successfully changing

the code, the Green LED will be lit

4. Note new access code . BAD GUY CANNOT RESET CODE.

So it must be noted and remembered!

1. Refer to the Honeywell control unit installation manual.

2. Enroll exactly as you would a key fob.

System Programming…

Key Type

4 Button

Serial Number

[press Stay key to enroll]

Button Key 1 – Zn 49

Arm Away

User

Master

Zone

49 (example)

Button Key 2 – Zn 50

Disarm

T.

Lynx Touch 5100, continued…

Button

Away Button Key 1 Loop 3 ARM AWAY

PIN Code Button Key 2 Loop 2 DISARM

Stay Button Key 3 Loop 4 ARM STAY

Stay + Away Button Key 4 Loop 1 24 Hour AUX

Button Key

Loop

programmed to

Lynx Plus 3000 & Vista:

To RF Learn: Press each PINpad button (or PIN Code) twice, more than 5
seconds apart.
Be at least 5 feet from panel.
Be sure to associate the Key with a User!

Button

Away 26 (example) 21 Arm-Away BR Loop 3

PIN Code 27 22 Disarm BR Loop 2

Stay 28 20 Arm-Stay BR Loop 4

Stay + Away 29 07 24 Hr Aud BR Loop 1

You may also use WIRELESS KEY TEMPLATE 3.

Operation

2GIG Go! Panel

Zone Number

Button

Stay ARM STAY flashes double red

Away ARM AWAY flashes double red twice

PIN Code DISARM flashes double green

Stay + Away PANIC ALARM flashes red 8 times

Zone Type

Panel Action LED

Input Type

Loop

Use Resolution RE252T 2GIG-Compatible PINpad for 2GIG panels.

Panic function will not work on 2GIG panel using this RE252
Honeywell version.

Button Key 3 – Zn 51

Arm Stay

To RF Learn: Press the PINpad STAY button twice, more than 5 seconds apart.
Be at least 5 feet from panel.

RE252_Honeywell-Compat_PIN-Pad.doc Page 1 of 4 28-Sep-12

www.ResolutionProducts.com

Button Key 4 – Zn 52

24 Hour Auxiliary

RE252_Honeywell-Compat_PIN-Pad.doc Page 2 of 4 28-Sep-12

www.ResolutionProducts.com

CR2032

Battery

Insert

Stay + Away

Entering

Sends Disarm

Away

Stay

TO CHANGE PIN CODE:

Red/Green

Pictures

Status LED
Shows command sent

Loop 4

Battery Replacement

Screwdriver here

to open

Current 4-digit access code, and then…

1 + 3  Red LED,and then…

Enter New Code

Sends Panic

Loop 1

+ Terminal up

Code

Loop 2

Loop 3

Specifications

Not supervised.
Replacement Battery: CR2032 Lithium / Manganese Dioxide
Temperature Range: 0F to 120F
Housing dimensions: 2x2.25x0.33 inches
1-way RF: Does not receive panel status

Specifications subject to change without notice.

Notices

“GE”, “Honeywell”, “DSC”, “2GIG” and “Napco” are trademarks owned by General Electric
Company, Honeywell International Inc., Tyco Safety Products Canada LTD, 2GIG Technologies
Inc., and NAPCO Security Systems, Inc., respectively.

Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or
Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper
enrollment and operation, per control panel installation instructions, at installation.

Warranty
Resolution Products, Inc. will replace products that are defective in their first year.

FCC Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.

Changes or modifications not expressly approved by the Resolution Products, Inc. could
void the user's authority to operate this equipment.

FCC ID: U5X-RE252

IC Notice

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may
cause undesired operation of the device.

Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence.
Son fonctionnement est soumis aux deux conditions suivantes:

1. Ce dispositif ne peut causer des interférences, et

2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.

IC: 8310A-RE252

RE252_Honeywell-Compat_PIN-Pad.doc Page 3 of 4 28-Sep-12

www.ResolutionProducts.com

RE252_Honeywell-Compat_PIN-Pad.doc Page 4 of 4 28-Sep-12

www.ResolutionProducts.com