Resolution RE251 User Manual
Lock + Unlock
Lock
Unlock
CR
2032
Battery
Insert
Wireless
Security
Solutions
RE251 Honeywell & 2GIG-Compatible Hidden Panic
Features
• Hidden mounting
• 1-button arming and disarming
• Large, easy-to-differentiate buttons
• Mounts in hidden locations via VHB® tape, or screws
• Strong, reliable RF signal.
• 4-6 year battery life on CR2032 battery.
Key Instructions
• Enrolling:
Operation
Lock & Unlock buttons simultaneously for 3 seconds Panic Alarm.
Refer to the Honeywell control unit installation manual.
Put the control panel in RF Learning mode.
• Each button (or “loop” – see picture) must be
enrolled as a separate zone.
• The Input Type is Button type “BR”.
• Press intended button until the Fob LED blinks. Wait
5 seconds and press same button again. Panel knows
what loop each button is when it is pressed (need
not be entered).
• After 2
nd
button press, Panel should indicate
successful learn.
…Or put the control panel in Serial Number entry mode
• Enter the Loop number associated with the intended
key.
• Enter the Serial Number of the device (located on a
label on the unit’s back).
Specifications
Crystal compatible operation
Not supervised.
Replacement Battery: CR2032 Lithium / Manganese Dioxide
Temperature Range: 0F to 120F
Housing dimensions: 3 x 1.2 x 0.52 inches
Specifications subject to change without notice.
Pictures
Battery Replacement
+ Terminal up
Screwdriver here
to open
LOOP 2
=
Panic (Enroll)
LOOP 3
RE251_Honeywell-Compat_Hidden_Panic.docPage 1 of 3 11-Jun-13
www.ResolutionProducts.com
RE251_Honeywell-Compat_Hidden_Panic.docPage 2 of 3 11-Jun-13
www.ResolutionProducts.com
Notices
“GE”, “Honeywell”, “DSC”, “2GIG” and “Napco” are trademarks owned by General Electric
Company, Honeywell International Inc., Tyco Safety Products Canada LTD, 2GIG Technologies
Inc., and NAPCO Security Systems, Inc., respectively.
Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or
Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper
enrollment and operation, per control panel installation instructions, at installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first year.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could
void the user's authority to operate this equipment.
FCC ID: U5X-RE252
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence.
Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE252
RE251_Honeywell-Compat_Hidden_Panic.docPage 3 of 3 11-Jun-13
www.ResolutionProducts.com
Loading...