Resolution RE122 User Manual

Wireless
Security
Solutions

RE122 GE-Compatible NanoMax Door / Window

Features

• For sensing things that open or separate.

• Magnet and Internal reed switch operation.

• 1-inch magnet gap!

• External Contact.

• Cover tamper.

• Strong, reliable RF signal.

• 6+ year battery life on CR1632 battery.

• Low Battery indication.

Key Instructions

• Battery “+” faces up.

• Enrolling:

Operation

• Magnetic and hardwire zone
Alarm, when…

Tamper, when cover is opened.
Supervisories, every hour.

Specifications

Magnet trip distance: 1 inch nominal
Mounting fastener: 3M VHB (Very High Bond) Tape
Replacement Battery: CR1632
Temperature Range: 0F to 120F
Housing dimensions: 1.8 x .77 x .39 inches

Specifications subject to change without notice.

 Place control panel in Learn Sensor Mode
 Open cover to tamper device, or
 Tamper enrollment signal can be sent by touching a

magnet to the sensor 5 times within 5 seconds

… magnet is pulled away from reed switch or
… hardwire changes to alarm.

Internal Picture

Magnetic
Reed
Switch

External
Contact
Connection

Battery
Bucket

Notices

Warranty
Resolution Products, Inc. will replace products that are defective in their first five (5) years.

FCC Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:

This device may not cause harmful interference.
This device must accept any interference that may be received, including interference
that may cause undesired operation.

Changes or modifications not expressly approved by the Resolution Products, Inc. could void the
user's authority to operate this equipment.

FCC ID: U5X-RE122

IC Notice

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1)This device may not cause interference, and
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC: 8310A-RE122

RE122_GE-Compatible_NanoMax_InstructionsPage 1 of 2 31-Jul-14

24-Hour Tech Support Line: [phone]

www.ResolutionProducts.com

RE122_GE-Compatible_NanoMax_InstructionsPage 2 of 2 31-Jul-14

24-Hour Tech Support Line: [phone]

www.ResolutionProducts.com