ResMed S9 AutoSet, S9 Elite User Manual

S9 AutoSet™ & S9 Elite

POSITIVE AIRWAY PRESSURE DEVICES

™

Welcome Guide

English

Welcome

Thank you for choosing the S9 AutoSet or S9 Elite. Before operating
these devices, please read the entire Welcome and Information Guides.

DC power inlet

Module/Adapter port

Air filter

S9 at a glance

Air outlet

The S9 system comprises the following elements:

• S9 device • SlimLine air tubing • 90W or 30W power supply unit • S9 travel bag • SD card

• S9 SD card protective folder.

Optional components include:

• H5i heated humidifier • H5i water tub • Standard air tubing • ClimateLine heated air tubing

• ClimateLine

MAX

heated air tubing • 90W power supply unit • 30W power supply unit (does not

support H5i) • Power Station II battery pack • DC/DC Converter 24V/90W.

Traveling tips

When traveling with your S9 only:

• Ensure you pack the SlimLine or Standard air tubing as the ClimateLine or ClimateLine
tubing is not designed to connect directly to the S9 device.

• Please ensure you purchase and travel with the approved power cord for the region where you will be
using the S9 device.

SD card slot

MAX

heated air

1

English

3

5

4

1

Setup

1. Connect the DC plug of the power supply unit to the rear of the S9.

2. Connect the power cord to the power supply unit.

3. Plug the other end of the power cord into the power outlet.

4. Connect one end of the air tubing firmly onto the air outlet.

5. Connect the assembled mask system to the free end of the air tubing.

Notes:

• For more information on assembling your mask see your mask user guide.

• Recommended masks are available on www.resmed.com on the Products page
under Service & Support.

2

2