ResMed S9 User Manual
S9 Elite™
POSITIVE A IRWAY PRESSURE
When an intelligent, feature rich fixed CPAP is needed, the S9 Elite is ResMed’s
recommendation. Like other devices in the S9 series, it includes comfort and compliance
enhancing features like enhanced Easy-Breathe technology… for whisper quiet mask
and device therapy plus Easy-Breathe EPR for the ultimate in natural, comfortable
breathing. To ensure greater insight into therapy, the S9 Elite provides via USB,
or SD card high resolution oximetry, efficacy and compliance data.
Easy-Breathe Technology
Easy-Breathe technology delivers superior
patient–device synchrony, increased patient
comfort, improved device quality and,
ultimately, improved compliance. Sure,
this new technology reduces radiated
noise to 24dBA, which in itself sets the
benchmark for device noise, but there
is more to this technology…Conducted
noise which passes from the device to
the mask via the tubing is radically reduced. What does this mean? A significant
improvement in comfort levels reported with
respect to mask and tubing noise.
Blinded, paired preference comparison of conducted noise (n=17)
CPAP at 10cm H2= with
S9 with SlimLine tube and
Preferred Preferred No
S8 II S9 preference
S8 II with standard tube
S8 II vs S9
S8 II with H4i vs S9 with H51
1 15 1
0 12 5
Technical SpecificationsBenefits
Easy-Breathe EPR
ResMed has enhanced the clinically proven
Easy-Breathe EPR waveform to be even more
comfortable. Throughout the night and breath
by breath, the Easy-Breathe waveform reduces
the work of breathing during exhalation creating
a gentle pressure that adapts to the patient’s
natural breathing cycle. With pressure delivery
and patient breathing more closely synchronised, breathing has never felt more natural.
Product Codes
S9 Elite 36143
H5i 36905
Climate Control kit 36915
New S9 Elite Features
• Easy-Breathe Technology
Easy-Breathe motor technology for unrivalled
radiated and conducted noise levels
• Compatibility
Full compatibility with H5i humidifier, 15mm
SlimLine and ClimateLine tubing plus 19mm
standard tubing
• OptionalClimateControl
o Absolute humidity delivery regardless of
changes to ambient conditions or therapy
pressure throughout the night
o Temperature control for greater
patient comfort
• SummaryData
Summary, efficacy and usage data for up
to 365 nights including central apnoea
statistics
• DetailedData
Efficacy and usage data for up to 30 nights
• Additionalparameters
30 nights’ data on additional parameters
including flattening index, snore, minute
ventilation and oximetry (when oximeter is
connected)
• Flowdata
High-resolution flow data at 25Hz for up to
7 nights
• SleepQualityIndicator
Operating pressure range 4 to 20 cm H2O
sOund pressure level
24 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1:2002
dimensiOns (l x W x H) 153 x 140 x 86mm
WeigHt 810g
90W pOWer supply unit
Input range 100-240V, 50-60Hz, 70VA (typical power
consumption), >100VA (maximum power consumption)
Operating:
temperature +5°C to +35°C
humidity 10-95%, non-condensing
altitude Sea level to 2,591 m
stOrage and transpOrt:
temperature -20°C to +60°C
humidity 10-95% non-condensing
HOusing cOnstructiOn
Flame retardant engineering thermoplastic
supplemental Oxygen
Recommended maximum supplemental oxygen flow: 4L/min
standard air filter Polyester fibre
slimline™ air tubing
Flexible plastic, 1.83m, 15mm inner diameter
air Outlet
The 22mm conical air outlet complies with ISO 5356-1
electrOmagnetic cOmpatibility
requirements (EMC) according to IEO60601-12. For residential,
commercial, and light industry environments.
aircraft use
These S9 devices comply with US FFC Part 15, Class B
requirements if no external data cables are used.
iec 60601-1 classificatiOn
Class II (double insulation), Type BF
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA, ResMed (UK) Ltd 96 Milton Park
Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide. Elite is a trademark of ResMed Ltd and is registered in U.S. Patent and Trademark Office. © 2010 ResMed Ltd.
Specifications may change without notice. 1013856/1 10 01 ResMed Europe c/o ResMed Norway Fjordveien 1 1363 Høvik Norway
Global leaders in sleep and respiratory medicine ww w.resmed.co m
Loading...