Home button for returning to the
Home screen at any time
Start/Stop button for starting therapy
Dial for navigating and changing options
Air outlet for connecting the air tubing
Water tub for humidification
Quick start guide
English
Read your entire AirCurveā¢ 10 User Guide before use.
Setup
1 |
2 |
Place the device on a stable level surface.
Plug the power connector into the rear of the device. Connect one end of the power cord into the power supply unit and the other end into the power outlet.
3 |
4 |
Connect the air tubing firmly to the air outlet located on the rear of the device.
Open the water tub and fill with water up to the maximum water level mark.
5 |
6 |
Close the water tub and insert it into the side of the device.
Connect the free end of the air tubing firmly onto the assembled mask. Press Start/Stop to begin therapy.