Reo link Digital Technology RLC 410WS User Manual

Reolink Mobile User Manual (For POE Camera)

Power

WiFi Camera

Connection Diagram

Reset

Power adapter

Network

Router

Internet

Phone PAD PC

Note: For Initial Setup, connect the camera by network and power cable.
Then follow the steps below.

1. Install Reolink App

You may search for “Reolink “App from Apple Store or Google Play or you may scan the QR code below
to download the App.

After downloading, Install and launch the application.

Reolink

2. Use Reolink App

During start-up, you will see the splash screen and Devices page. App will auto show the device list in
your LAN (Local Area Network).

3. Wi-Fi Setting

Click Menu button, you will go back to the device page, Click Wi-Fi button, App will show
Get Wi-Fi info, at the meantime, App will sync your mobile WIFI SSID to the Camera which you are
setting currently.
You can:

A: Click SSID to search the Wi-Fi signal in your area, choose the Wi-Fi signal which you want to join
and enter the password, then click Save Button. Or

B: If you want to use other Wi-Fi, click Use Other Wi-Fi checkbox and manual input SSID and password.
Then click Save Button.

4. Create Password

Choose and click the Device you want to add, for security purpose, you need to create the password
using at least 6 characters. Then click OK.

5. Live View

Now you can see the Live View page as below.

PTZ Control (support Auto Focus
Camera and PTZ Camera only)

Stream

Focus near object

Iris: not avilable

Focus far object

Zoom in to get more details and zoom out to
have a wide view angle

Fluent Setting: Stream type —Sub Stream
Resolution—Q720
Frame Rate—12
Bitrate – 256K

Balanced Setting: Stream type—main Stream
Resolution—2560*1440
Frame Rate—25 Frame Rate—25
Bitrate—2048K

Clear Setting: Stream type—main Stream
Resolution—2560*1440
Frame Rate—25
Bitrate—2048K

Click the settings button, you can set the.

Stream Type: Main Stream / Sub Stream
Resolution: Main Stream—(2560*1440)

Sub Stream—(Q720P)
Frame Rate: number of images that are displayed per

second, if frame rate is higher, the image
is more fluent is more fluent

Max Bitrate: bite rate is higher, the image is clearer

6. Live View Configuration (Camera List )

Click Camera list button from live view windows, you can see all the camera connected. Choose
the camera you want to view, then click Start Live View.

1

2

3

This shows how many camera are connected, you can drag the image to view next Camera.

Here you can see the multi-channel screen when you choose to show more device.Example,
when you choose to show 4 screens, you can see below multi-channel Screen.

7. Add Device in Different Network

On Devices page, click button to add and modify Device. After finished setting,
click Save.

1. Device Name: Modify Device name here

2. Connect Mode: Change the connection mode to P2P or IP/Domain by click arrow button

3. UID: Click QR code button to scan QR code or directly inputthe UID

4. User Name and Password

5. Save: Save the settings you modified on this page

6. Start Live View: Click to view the device

8. Remote Configuration

Click on Device page to log in to Remote Configuration page.

9. Modify Device

On Device page, click to modify the selected device. You can refer to item 6 for the details.

10. Delete Device

On Device page, click button to delete the selected device.

10. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipmentinterference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.

Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be installed and operated with

limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.