Reo link Digital Technology ARGUS2 User Manual
Technical Support
For more troubleshooting, please go to FAQs on our website:
https://reolink.com/faqs/
For other technical support, please contact us at
support@reolink.com
Reolink Argus 2
Quick Start Guide
QG2_A
Welcome to Reolink
Easy Setup Within Minutes!
What’s in the Box
* *
Reolink
Argus 2 Camera
x1
Rechargeable
Battery
x1
Outdoor Security Mount
(with a hook & loop strap)
x1
Base
x1
Skin
(with a small rope)
x1
General Introduction
Micro SD Card Slot
Reset Hole
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Reset Needle
x1
The camera and the rechargeable battery are packed separately in the same package.
*
Please dress the camera with the skin for better weatherproof performance when
*
you install the camera outdoors.
Surveillance Sign
x1
Mounting
Hole Template
x2
Screws (in pack)x2Micro USB Cable
Base
x1
The LED in Red
(WiFi connection failed)
Blinking: Standby status
On: Working status
The LED in Blue
(WiFi connection succeeded)
Blinking: Standby status
On: Working status
Install the Rechargeable Battery to the Camera
Charge the Battery
Pleasepressthebutton(onthetopofthebackcasing),andslide thebackcasingdownwardtocloseit.
Thebuttonalsoneeds to be closedfirmlyfor goodweatherproofperformance.
For the weatherproof performance, always cover the USB charging port with the rubber plug.
Argus 2
Micro USB Cable
Rechargeable
Battery
1. You can charge the battery when it's installed to the camera.
2. You can charge the battery separately.
3. You can charge the battery with Reolink solar panel. Please note that the solar
panel is NOT included in the package. You can buy the solar panel on Reolink official
online store.
There is a status LED under the micro USB port of the battery, indicating the battery charging status.
Green LED: Fully charged
Orange LED: Charging
Reolink
Solar Panel
(Not included in the package)
1. Charge the battery when it's installed to the camera.
2.Charge the battery separately.
Loading...