PoE IP Camera
Technical Support
For Windows Client & Mac Client, please download the PC software:
https://reolink.com/software-and-manual/
For advanced setup, please download the user manual:
https://reolink.com/software-and-manual/
For more troubleshooting, please go to FAQs on our website:
https://reolink.com/faqs/
For other technical support, please contact us at
support@reolink.com
Quick Start Guide
QG4_A
Welcome to Reolink
Easy Setup Within Minutes!
Camera Connection Diagram
PoE IP Camera
Your Smart
Device
PoE Switch
Router
Network Cable
For initial setup, please connect the camera to your router LAN port with an Ethernet
cable, and then follow the steps below to set up your camera. Make sure that your camera
and your smart devices are in the same network.
Network Cable
Power Adapter
01.
Access the
Camera by
Smartphones
Install Reolink App
There are two ways to get the Reolink App:
1. Search “Reolink” in App Store (for iOS), or Google Play (for Android), download and
install the app.
2. Scan the QR code below to download and install the app.
Available on the
Add the Device
When in LAN
1
(Local Area Network)
The camera will be automatically added.
When in WAN
2
(Wide Area Network)
You need to add the camera either by
scanning the QR code on the camera or
by entering the UID number manually.
1
In LAN
Front Door
Front Door
3. Tap screen to sync the time
and create your password.
4. Start live view or go to “Device
Settings” for more configurations.
1. Connect your smartphone to
the WiFi network of your router.
2. Launch Reolink App. The camera
will automatically display in the
camera list in LAN.
2
In WAN
Front Door
Add New Device
3. Name your camera, create a password, and then start live view.
1. click ’+‘ on the up right corner. 2. Scan the QR code on the camera, and
then tap “Login”. (There is no password at
the factory default status.)
This icon only displays if the camera supports 2-way audio.
This icon only displays if the camera supports pan & tilt (zoom).
02.
Access the
Camera by
Computer
Install Reolink Client
Please install the client software from the recourse CD or download it from our official
website: https://reolink.com/software-and-manual.
Start Live View
Launch the Reolink Client software on the PC. By
default, the client software will automatically search
the cameras in your LAN network and display them in
the “Device List” on the right-side menu.
Click the “Start” button, and you can view the live
streaming now.
Device list
Front Door
State: login success
Add the Device
Alternatively, you can manually add the camera to the client.
Please follow the steps below.
Device list
Camera1
Add Device
Device Basic Infomation
Device Name
Camera1
IP Address
Register Mode
admin
User Name
2
NO. Device Name IP Address Port Mac Addr UID
Camera11
192.168.10.10 EC:71:DB:B1:6D:85
Media Port
9000
192.168.10.10
IP Address
5
******
Password
CancelOKScan Device In LAN
9000
3
1. Click “Add Device” on the right-side menu.
2. Click "Scan Device in LAN".
3. Double click on the camera you want to add. The information will be filled in automatically.
4. Input the password for the camera. The default password is blank. If you have created
the password on Reolink App, you need to use the password to log in.
5. Click “OK” to log in.
Stae: login success
4
1
Add Device
Loading...