Renesas H8SX-1653, HS1653ECN61H, TFP-120 User Manual

REJ10B0200-0200

H8SX/1653 Group E6000H TFP-120

User System Interface Board

HS1653ECN61H User’s Manual

Renesas Microcomputer Development Environment System

HS1653ECN61HE

Rev.2.00
Revision Date: Dec. 09, 2005

Keep safety first in your circuit designs!

1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and
more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.

Notes regarding these materials

1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corp. product best suited to the customer's application; they do not convey any license
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or
a third party.

2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third­party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.

3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corp. without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or
an authorized Renesas Technology Corp. product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising
from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means,
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).

4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Renesas
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.

5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in
whole or in part these materials.

7. If these products or technologies are subject to the Japanese export control restrictions, they must
be exported under a license from the Japanese government and cannot be imported into a country
other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.

8. Please contact Renesas Technology Corp. for further details on these materials or the products
contained therein.

IMPORTANT INFORMATION

READ FIRST

• READ this user's manual before using this user system interface board.

• KEEP the user's manual handy for future reference.
Do not attempt to use the user system interface board until you fully understand its

mechanism.

User System Interface Board:

Throughout this document, the term "user system interface board" shall be defined as the
following product produced only by Renesas Technology Corp. excluding all subsidiary products.

• User system interface board (HS1653ECN61H)
The user system or a host computer is not included in this definition.

Purpose of the User System Interface Board:

This user system interface board is for connecting the evaluation chip board and user system.
This user system interface board must only be used for the above purpose.

Improvement Policy:

Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as
Renesas) pursues a policy of continuing improvement in design, performance, functions, and
safety of the user system interface board. Renesas reserves the right to change, wholly or
partially, the specifications, design, user's manual, and other documentation at any time without
notice.

Target User of the User System Interface Board:

This user system interface board should only be used by those who have carefully read and
thoroughly understood the information and restrictions contained in the user's manual. Do not
attempt to use the user system interface board until you fully understand its mechanism.

It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the user system interface board.

I

LIMITED WARRANTY

Renesas warrants its user system interface boards to be manufactured
in accordance with published specifications and free from defects in
material and/or workmanship. Renesas will repair or replace any
user system interface boards determined to be defective in material
and/or workmanship. User system interface boards are wearing parts
which Renesas will not repair or replace if damaged and/or worn
through use. The foregoing shall constitute the sole remedy for any
breach of Renesas’ warranty. This warranty extends only to you, the
original Purchaser. It is not transferable to anyone who subsequently
purchases the user system interface board from you. Renesas is not
liable for any claim made by a third party or made by you for a third
party.

DISCLAIMER

RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
USER SYSTEM INTERFACE BOARD, THE USE OF ANY USER
SYSTEM INTERFACE BOARD, OR ITS DOCUMENTATION,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
EXCEPT AS EXPRESSLY STATED OTHERWISE IN THIS
WARRANTY, THIS USER SYSTEM INTERFACE BOARD IS SOLD
"AS IS ", AND YOU MUST ASSUME ALL RISK FOR THE USE
AND RESULTS OBTAINED FROM THE USER SYSTEM
INTERFACE BOARD.

II

State Law:

Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusio n may not apply to you.
This warrant y gi ves yo u spec i fic le gal rig hts, and you ma y ha ve ot her rig hts which may vary fro m
state to state.

The Warranty is Void in the Following Cases:

Renesas shall have no liability or legal responsibility for any problems caused by misuse,
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the user
system interface board without Renesas’ prior written consent or any problems caused by the user
system.

All Rights Reserved:

This user's manual and user system interface board are copyrighted and all rights are reserved
by Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any
form, in hard-copy or machine-readable form, by any means available without Renesas’ prior
written consent.

Other Important Things to Keep in Mind:

1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and perfor mance of Renesas’ semiconductor products. Renesas assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.

2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Renesas.

Figures:

Some figures i n this user's manual may s how items diffe rent from your actual system.

Limited Anticipation of Danger:

Renesas cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the user system interface board are therefore not all
inclusive. Therefore, you must use the user system interface board safely at your own risk.

III

SAFETY PAGE

READ FIRST

• READ this user's manual before using this user system interface board.

• KEEP the user's manual handy for future reference.
Do not attempt to use the user system interface board until you fully understand its

mechanism.

DEFINITION OF SIGNAL WORDS

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.

DANGER

avoided, will result in death or serious injury.

WARNING

avoided, could result in death or serious injury.

CAUTION

avoided, may result in minor or moderate injury.

CAUTION

potentially hazardous situation which, if not avoided, may result
in property damage.

DANGER indicates an imminently hazardous situatio n whic h, if not

WARNING indicates a potentially hazardous situation which, if not

CAUTION indic a tes a potentia lly hazar do us situat io n which, if not

CAUTION used without the safety alert symbol indicates a

NOTE

IV

emphasizes essential information.

WARNING

Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.

1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.

2. Always switch OFF the E6000H emulator and user system
before connecting or disconnecting any CABLES or
PARTS.

3. Always before connecting any BOARDS, make sure that
pin 1 on both sides are correctly aligned.

V

Preface

The HS1653ECN61H is a user system interface board that connects a user system for the
H8SX/1653 TFP-120 package to the H8SX/1650 E6000H emulator (HS1650EPH60H).
Emulation of the H8SX/1653 group is only possible when this user system interface board is
connected to the HS1650EPH60H.

i

Contents

Section 1 Configuration.....................................................................................1

Section 2 Connection Procedures......................................................................3

2.1 Connecting User System Interface Board to User System................................................3

2.1.1 Installing IC Socket..............................................................................................4

2.1.2 Soldering IC Socket.............................................................................................4

2.1.3 Installing IC Socket..............................................................................................4

2.1.4 Fastening IC Socket Connector............................................................................5

2.2 Exchanging the Spacer of the Evaluation Chip Board......................................................7

2.3 Connecting User System Interface Board to Evaluation Chip Board...............................8

2.4 Recommended Dimensions for User System Mount Pad (Footprint)...............................10

2.5 Dimensions for Evaluation Chip Board and User System Interface Board......................11

2.6 Resulting Dimensions after Connecting User System Interface Board.............................12

2.7 Using the Emulator without Connecting User System......................................................13

Section 3 User System Interface Circuits..........................................................15

Section 4 Verifying Operation...........................................................................18

Section 5 Notice.................................................................................................20

Section 6 Restrictions........................................................................................22

ii