Renesas M34551E8FP, PCA7414 User Manual

PCA7414

PROM Programming Adapter for M34551E8FP

User's Manual

Rev.1.00
September 1, 2003
REJ10J0338-0100Z

* TR4943, R4944A, R4945 and R4945A are registered trademarks of Advantest Corporation.

(2 /14)

• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better
and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal
injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any
malfunction or mishap.

• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to
the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas
Technology Corporation, Renesas Solutions Corporation or a third party.

• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples
contained in these materials.

• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas
Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest
product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or
typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage,
liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology
Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms,
please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and
products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or
other loss resulting from the information contained herein.

• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances
in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an
authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce
in whole or in part these materials.

• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the
Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to
the export control laws and regulations of Japan and/or the country of destination is prohibited.

• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products
contained therein.

Keep safety first in your circuit designs!

Notes regarding these materials

• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing
integration test, evaluation, or some experiment else.

• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.

• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall
under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in
Japan.

Renesas Tools Homepage http://www.renesas.com/en/tools

Precautions to be taken when using this product

Contents

6. How to Request for Support................................................................................................................12

1. Precautions for Safety ..........................................................................................................................4

1.1 Safety Symbols and Meanings ...............................................................................................................................4

2. Introduction..........................................................................................................................................6

2.1 Things to Check When Unpacking.........................................................................................................................6

3. Specifications.......................................................................................................................................7

4. How to Write the Program..................................................................................................................8

4.1 Programming Conditions........................................................................................................................................8

4.2 Programming Procedure .........................................................................................................................................8

4.3 Attaching Adapter to PROM Programmer .............................................................................................................9

4.4 Inserting MCU into Programming Adapter.......................................................................................................... 10

4.5 Precautions When Opening and Closing IC Socket.............................................................................................10

4.6 Precautions When Handling Adapter ...................................................................................................................10

5.Recommended PROM Programmer..................................................................................................11

To Use the Product Properly

Precautions for Safety

• Either in the User's Manuals or on the product, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other
persons, or damage to your properties.

• Their graphic images and meanings are given in Chapter 1, Precautions for Safety.
Be sure to read this chapter before using the product.

(3 / 14)

1. PRECAUTIONS FOR SAFETY

T

In this User's Manual, several icons are used to insure proper handling of this product and also to prevent
injuries to you or other persons, or damage to your properties.

This chapter describes precautions which should be taken in order to use this product safely and properly.
Be sure to read this chapter before using this product.

1.1 SAFETY SYMBOLS AND MEANINGS

If the requirements shown in the "WARNING"

WARNING

CAUTION

IMPORTAN

sentences are ignored, the equipment may
cause serious personal injury or death.

If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.

NOTE: It means important information on us­ing this product.

In addition to the three above, the following are also used as appropriate.

means WARNING or CAUTION.

Example :

means PROHIBITION.

Example :

means A FORCIBLE ACTION.

Example :

The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".

CAUTION AGAINST AN ELECTRIC SHOCK

DISASSEMBLY PROHIBITED

UNPLUG THE POWER CABLE FROM THE
RECEPTACLE.

(4 / 14)

WARNING

Warning for Use Environment:

• This equipment is to be used in an environment with a maximum ambient
temperature of 35°C. Care should be taken that this temperature is not exceeded.

• Select the proper programming mode of the PROM programmer.

CAUTION

Cautions to Be Taken for This Product:

• Do not disassemble or modify this product. Personal injury due to electric shock
may occur if this product is disassembled or modified.

• Use caution when handling this product. Be careful not to apply a mechanical
shock such as falling, etc.

• Do not directly touch the connector pins of this product.

• Be careful with the static electricity when handling this product and the MCU.

Cautions for Keeping This Product:

• When not using this product for a long time,
(1) Attach the connector pins of this product to the conductive sponge.

(2) Put it into a conductive polyvinyl, and keep it in the package case shipped

from the factory.

(3) Store it in the place where humidity and temperature are low and direct

sunshine does not strike.

IMPORTANT

• Attach this product to the IC socket on the PROM programmer properly.

• Insert the MCU to the IC socket of this product properly.

• When opening and closing the IC socket of this product, be sure to keep it
horizontal.

• Do not use the PROM programmer's device identification code readout function.

(5 / 14)