Renesas M3T-FLX-DMY613 User Manual
M3T-FLX-DMY613
Converter Board for Connecting M16C/60 Series 80-pin 0.65mm pitch QFP
User’s Manual
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Rev.2.00
Aug. 01, 2007
REJ10J0343-0200
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/3)
1. Descripti on
PRQP0080JA-A (formerly: 80P6S-A)
The M3T-FLX-DMY613 is used to convert the emulation
pod for M16C
/60 Series MCUs to the pin assignments
of 80-pin 0.65mm pitch QFP (PRQP0080JA-A) to
connect the FLX100 and M3T-DUMMY80S.
2. Package Components (see Figure 1)
(1) M3T-FLX-DMY613 converter board
(2) M3T-FLX-DMY613 User's Manual (this manual)
3. Specifications
FLX-DMY613 main unit
Figure 1 Package components of M3T-FLX-DMY613
: positions of No. 1 pin
Be sure to match the position of
No. 1 pin of the foot pattern an d
each part.
Table 1 Specifications
Item Description
Applicable MCU
Package
M16C/60 Series
8
(80-pin 0.65mm pitch QFP)
Insertion/removal
iterations of
20 times guaranteed
connector
4. Application (see Figure 2)
Mount the DUMMY80S to the socket on the target. On top
of it, mount the socket frame and M3T-FLX-DMY613 in
that order. Then connect the emulation pod to the
connector provided at the top of the M3T-FLX-DMY613.
5. Connection Procedure (see Figure 2)
(1) Mount the socket on the target.
(2) Mount the M3T-DUMMY80S on the socket.
(3) Attach the socket frame to the socket.
(4) Connect the emulation pod for M16C/60
Series MCUs and the M3T-FLX-DMY613.
(5) Connect the DUMMY80S and the M3T-FLX-DMY613.
Emulation pod for
M16C/60 Series
MCUs
(4)
M3T-FLX-DMY613
(5)
Socket frame
(3)
M3T-DUMMY80S
(2)
(1)
Socket
Figure 2 Usage of M3T-FLX-DMY613
6. External Dimensions of M3T-FLX-DMY613
C
M3T-FLX-DMY613 REV.A
50 26
1
D
50
1
B
J1
J2
MADE IN JAPAN
M
25
26
25
M
Figure 3 External dimensions of M3T-FLX-DMY613
(2/3)
A
B
C
D
M
Dimension [mm]
10.0
12.5
25.0
25.0
6.3
A
Symbol
Loading...