Renesas M3T-FLX-80NSD User Manual
M3T-FLX-80NSD
Converter Board for Connecting FLX100 to 80-pin 0.5-mm-pitch LQFP
User’s Manual
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to p ractical use by performing
integration test, evaluation, or some experiment else.
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
CAUTION
Renesas Tools Homepage http://www.renesas.com/en/tools
Keep safety first in your circuit designs!
Notes regarding these materials
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Rev.2.00
March 1, 2004
REJ10J0362-0200Z
(1/4)
1. Outline
The M3T-FLX-80NSD is a converter board for connecting the
100-core flexible cable FLX100 to a foot pattern for 80-pin
0.5-mm-pitch LQFP (80P6Q-A).
2. Package Components
(1) M3T-FLX-80NSD converter board............................. 1 pc.
(2) YQSOCKET080SDF
(made by Tokyo Eletech Corporation)
(pre-mounted on the M3T-FLX-80NSD).................... 1 pc.
(3) YQPACK080SD
(made by Tokyo Eletech Corporation)
(4) NQPACK080SD-ND
(5) YQ-GUIDE (4 pieces)
(made by Tokyo Eletech Corporation)
(made by Tokyo Eletech Corporation)
................ 1 pc.
....... 1 pc.
.....4 pcs.
(6) M3T-FLX-80NSD User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
(80-pin 0.5-mm-pitch LQFP)
80P6Q-A
20 times guaranteed
4. Usage (See Figure 2)
The M3T-FLX-80NSD can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK080SD-ND on the target board.
(1) For debugging
Mount the NQPACK080SD-ND and YQPACK080SD on
the foot pattern of the target board in that order. And
connect the probe tip of the emulator to the upper
connector of the M3T-FLX-80NSD. Then connect the
YQPACK080SD and M3T-FLX-80NSD.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080SD (separately available) in
that order on the NQPACK080SD-ND on the target
system.
Before using the M3T-FLX-80NSD, be sure to read "7.
Precautions" on page 4.
M3T-FLX-80NSD
NQPACK080SD-ND
YQPACK080SD
YQ-GUIDE (x4)
Figure 1 Package components of the M3T-FLX-80NSD
(1) Debugging
FLX100 cable
M3T-FLX-80NSD
(2) Onboard evaluation
YQ-GUIDE (x4)
HQPACK080SD
(separately available)
YQPACK080SD
MCU with on-chip flash
memory or one-time PROM
NQPACK080SD-ND
80-pin 0.5-mm-pitch
(80P6Q-A) foot pattern
: No. 1 pin
Be sure to align the pins.
Figure 2 Usage of the M3T-FLX-80NSD
(2/4)
Loading...