Renesas M3T-F160-80NSD User Manual

Page 1

M3T-F160-80NSD

Converter Board for Connecting FLX160 to 80-pin 0.5-mm-pitch LQFP

User’s Manual

z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products

better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited

to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of

any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information

on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and

algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under

circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or

reproduce in whole or in part these materials.

z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from

the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the

products contained therein.

z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your

program you have finished developing, be sure to make a judgment on your own risk that it can be put to p ractical use by performing integration test, evaluation, or some experiment else.

z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product. z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.

However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not

fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

CAUTION

Renesas Tools Homepage http://www.renesas.com/en/tools

Keep safety first in your circuit designs!

Notes regarding these materials

Precautions to be taken when using this product

If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.

Rev.1.00 October 18, 2004 REJ10J0801-0100Z

(1/4)

Page 2

1. Outline

The M3T-F160-80NSD is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 80-pin

0.5-mm-pitch LQFP (80P6Q-A).

2. Package Components

(See Figure 1)

(1) M3T-F160-80NSD converter board............................1 pc.

(2) NQPACK080SD-ND (3) YQPACK080SD

(made by Tokyo Eletech Corporation)

(4) YQSOCKET080SDF

(made by Tokyo Eletech Corporation)

......... 1 pc.

................ 1 pc.

......... 1 pc.

Pre-mounted on the converter board M3T-F160-80NSD (5) YQ-GUIDE’s

(made by Tokyo Eletech Corporation)

....................4 pcs.

(6) M3T-F160-80NSD User's Manual (This manual)

3. Specifications

Table 1 Specifications

Applicable package

(80-pin 0.5-mm-pitch LQFP)

Insertion/removal

iterations of connector

4. Usage

(See Figure 2)

The M3T-F160-80NSD can be used for debugging and board-mounted evaluation in common by mounting the NQPACK080SD-ND on the user system.

(1) For debugging

Mount the NQPACK080SD-ND on the foot pattern of the user system and attach the YQPACK080SD on it. And connect the probe of the emulation pod to the upper connector of the M3T-F160-80NSD. Then connect the YQPACK080SD and the M3T-F160-80NSD.

(2) For onboard evaluation

Mount an MCU with on-chip flash memory or one-time PROM and the HQPACK080SD (separately available) in that order on the NQPACK080SD-ND on the user system.

Before using the M3T-F160-80NSD, be sure to read "6. Precautions" on page 3.

80P6Q-A

50 times guaranteed

M3T-F160-80NSD

YQ-GUIDE (x4)

YQPACK080SD

NQPACK080SD-ND

Figure 1 Package components of the M3T-F160-80NSD

(1) For debugging

M3xxxxT-RLFS,

FLX160-PRB

M3xxxxTx-EPB

M3T-F160-80NSD

(2) For on-board evaluation

YQ-GUIDE (x4)

HQPACK080SD

(separately available)

YQPACK080SD

MCU with on-chip flash

memory or one-time PROM

NQPACK080SD-ND

80-pin 0.5-mm-pitch

(80P6Q-A) foot pattern

: No. 1 pin Be sure to align the pins.

Figure 2 Usage of the M3T-F160-80NSD

(2/4)

Page 3

5. External Dimensions and a Sample Foot Pattern

55.0

40b

4160

M3T-F160-80NSD REV.A

40a

40b

21.8

……

CN1

IC1

MADE IN JAPAN

CN2

40.0

5.3

16.5

…………

Figure 3 External dimensions and a sample foot pattern of the M3T-F160-80NSD

6. Precautions

CAUTION

Caution to Be Taken for This Product:

When connecting the YQPACK080SD, be sure to use the included YQ-GUIDE's.

Do NOT use the screws included with the YQPACK080SD for connecting the YQPACK080SD.

IMPORTANT

0.25

0.5

11.1

15.1

……

…………

15.1

11.1

Notes on This Product:

z We cannot accept any request for repair.

For purchasing the NQPACK080SD-ND, YQPACK080SD, HQPACK080SD, contact the following:

Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm Daimaru Kogyo Ltd. http://www.daimarukogyo.co.jp/

For inquiries about the product or the contents of this manual, contact your local distributor.

Renesas Tools Homepage http://www.renesas.com/en/tools

(3/4)

Page 4

7. Correspondence of Connectors CN1 and CN2

Table 2 Correspondence of the connectors

CN1 IC1 CN1 IC1 CN2 IC1 CN2 IC1

1a - 1b 6 1a - 1b 7 2a 5 2b 4 2a 8 2b 9 3a 3 3b - 3a 10 3b 11 4a - 4b - 4a 12 4b 13 5a - 5b - 5a 14 5b 15 6a - 6b - 6a 16 6b 17 7a 2 7b 1 7a 18 7b 19 8a 80 8b 79 8a 20 8b 21

9a - 9b - 9a 22 9b 10a - 10b - 10a - 10b 11a - 11b - 11a - 11b 12a - 12b 78 12a - 12b 13a 77 13b 76 13a - 13b 14a 75 14b 74 14a 23 14b 24 15a 73 15b 72 15a 25 15b 26 16a 71 16b 70 16a 27 16b 28 17a 69 17b - 17a - 17b 18a - 18b - 18a - 18b 19a - 19b - 19a 29 19b 30 20a - 20b - 20a 31 20b 21a - 21b - 21a - 21b 32 22a - 22b - 22a - 22b 23a - 23b 68 23a - 23b 24a 67 24b 66 24a - 24b 25a 65 25b - 25a 33 25b 34 26a - 26b - 26a 35 26b 36 27a - 27b - 27a - 27b 28a 64 28b 63 28a - 28b 37 29a - 29b - 29a 38 29b 30a - 30b - 30a - 30b 31a - 31b - 31a - 31b 32a - 32b 62 32a - 32b 33a 61 33b 60 33a - 33b 34a 59 34b 58 34a 39 34b 40 35a 57 35b 56 35a 41 35b 42 36a 55 36b 54 36a 43 36b 44 37a 53 37b 52 37a 45 37b 46 38a 51 38b 50 38a - 38b 39a 49 39b 48 39a - 39b 40a 47 40b - 40a - 40b -

(“-“: No connection)

(4/4)