Page 1
M3T-F160-128NRD
Converter Board for Connecting FLX160 to 128-pin 0.5-mm-pitch LQFP
User's Manual
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.
Keep safety first in your circuit designs!
Notes regarding these materials
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.
Renesas Tools Homepage http://www.renesas.com/en/tools
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.
Rev. 1.00
July 1, 2003
REJ10J0233-0100Z
Page 2
1. Outline
The M3T-F160-128NRD is a converter board for connecting
the 160-core flexible cable FLX160 to a foot pattern for 128pin 0.5-mm-pitch LQFP (128P6Q-A).
2. Package Components (See Figure 1)
(1) M3T-F160-128NRD converter board......................1
(2) YQPACK128RD (made by Tokyo Eletech Corporation)..... 1
(3) NQPACK128RD (made by Tokyo Eletech Corporation)..... 1
(4) YQ-GUIDE's............................................................ 4
(5) M3T-F160-128NRD User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal iterations of connector
128P6Q-A (128-pin 0.5-mm-pitch LQFP)
50 times guaranteed
4. Usage (See Figure 2)
The M3T-F160-128NRD can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK128RD on the target system.
(1) For debugging
Mount the NQPACK128RD on the foot pattern of the
target system and attach the YQPACK128RD on it. And
connect the probe of the emulation pod to the upper
connector of the M3T-F160-128NRD. Then connect the
YQPACK128RD and the M3T-F160-128NRD.
(2) For board-mounted evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK128RD (separately available)
in that order on the NQPACK128RD on the target
system.
Before using the M3T-F160-128NRD, be sure to read "7.
Precautions" on page 4.
M3T-F160-128NRD
YQ-GUIDE's (x4)
Figure 1 Package components
(1) For debugging
M3T-F160-128NRD
YQ-GUIDE's (x4)
YQPACK128RD
YQPACK128RD
NQPACK128RD
FLX160-PRB
or
M3xxxxTx-EPB
(2) For board-mounted evaluation
HQPACK128RD
(separately available)
NQPACK128RD
128-pin 0.5-mm-pitch
(128P6Q-A) foot pattern
Figure 2 Usage
( 2 / 4 )
: Position of No. 1 pin
Be sure to align the pins.
MCU with on-chip flash
memory or one-time PROM
Page 3
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-F160-128NRD is
shown below.
(1) Mount the NQPACK128RD on the target system.
(2) Attach the YQPACK128RD on the NQPACK128RD.
(3) Secure the four corners of the YQPACK128RD with the
YQ-GUIDE's.
• Do NOT use the screws included with the
YQPACK128RD.
• Do NOT use the screwdriver included with the
NQPACK128RD that is used only for the
HQPACK128RD.
(4) Attach the probe of the emulation pod to the M3T-F160-
128NRD.
(5) Attach the M3T-F160-128NRD on the YQPACK128RD.
M3T-F160-128NRD
YQ-GUIDE's (x4)
YQPACK128RD
NQPACK128RD
128-pin 0.5-mm-pitch
(128P6Q-A) foot pattern
FLX160-PRB
or
M3xxxxTx-EPB
Use a slotted screwdriver.
: Position of No. 1 pin
Be sure to align the pins.
Figure 3 Connection procedure
6. External Dimensions and a Sample Foot Pattern
Figure 4 External dimensions and a sample foot pattern
Unit: mm
( 3 / 4 )
Page 4
7. Precautions
CAUTION
Cautions to Be Taken for This Product:
• To connect the YQPACK128RD, be sure to use the included YQ-GUIDE's.
• Do NOT use the screws included with the YQPACK128RD in order to connect the
YQPACK128RD.
IMPORTANT
Notes on This Product:
•We cannot accept any request for repair.
• For purchasing the NQPACK128RD, YQPACK128RD, HQPACK128RD, contact
the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm
• For inquiries about the product or the contents of this manual, contact your local
distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
8. Correspondence of the Connectors CN1 and CN2
Table 2 Correspondence of the connectors
CN1 IC1 CN1 IC1 CN2 IC1 CN2 IC1
1a - 1b 16 1a - 1b 17
2a 15 2b 14 2a 18 2b 19
3a 13 3b 12 3a 20 3b 21
4a 11 4b - 4a 22 4b 23
5a - 5b - 5a 24 5b 25
6a - 6b - 6a 26 6b 27
7a 10 7b 9 7a 28 7b 29
8a 8 8b 7 8a 30 8b 31
9a 6 9b 5 9a 32 9b 33
10a 4 10b - 10a 34 10b 11a - 11b 3 11a - 11b 35
12a 2 12b 1 12a 36 12b 37
13a 128 13b 127 13a 38 13b 39
14a 126 14b 125 14a 40 14b 41
15a 124 15b 123 15a 42 15b 43
16a 122 16b 121 16a 44 16b 45
17a 120 17b - 17a 46 17b 47
18a 119 18b - 18a 48 18b 49
19a 118 19b 117 19a 50 19b 51
20a 116 20b - 20a 52 20b 21a - 21b 115 21a - 21b 53
22a 114 22b 113 22a 54 22b 23a 112 23b 111 23a 55 23b 24a 110 24b 109 24a 56 24b 57
25a 108 25b - 25a 58 25b 59
26a - 26b - 26a 60 26b 61
27a - 27b - 27a 62 27b 63
28a 107 28b 106 28a 64 28b 65
29a 105 29b 104 29a 66 29b 67
30a 103 30b - 30a 68 30b 31a - 31b 102 31a - 31b 69
32a 101 32b 100 32a - 32b 70
33a 99 33b 98 33a - 33b 71
34a 97 34b 96 34a 72 34b 73
35a 95 35b 94 35a 74 35b 75
36a 93 36b 92 36a 76 36b 77
37a 91 37b 90 37a 78 37b 79
38a 89 38b 88 38a 80 38b 81
39a 87 39b 86 39a 82 39b 83
40a 85 40b - 40a 84 40b -
("-": No connection)
( 4 / 4 )
Loading...