Renesas M3T-DCT42B-450 User Manual
M3T-DCT42B-450
Direct Dummy IC for 42-pin 0.8-mm-pitch SSOP
User's Manual
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.
Keep safety first in your circuit designs!
Notes regarding these materials
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.
Renesas Tools Homepage http://www.renesas.com/en/tools
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.
Rev. 1.00
July 1, 2003
( 1 / 4 )
REJ10J0200-0100Z
1. Outline
The M3T-DCT42B-450 is an accessory tool for connecting
an emulator probe and the target. Its dimensions are the same
as those of the 42-pin 0.8-mm-pitch SSOP (11.8 x 17.5 mm)
IC package (42P2R-A).
2. Package Components (See Figure 1)
(1) M3T-DCT42B-450 main unit......... x1
(2) M3T-DCT42B-450 User's Manual (This manual)
M3T-DCT42B-450 main unit
Figure 1 Package component
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of
connector
(42-pin 0.8-mm-pitch SSOP)
42P2R-A
50 times guaranteed
4. Usage (See Figure 2)
The M3T-DCT42B-450 can be used for debugging by mounting it on the target system and connecting to an emulator.
Before using the M3T-DCT42B-450, be sure to read "9.
Precautions" on page 4.
Figure 2 Usage
5. Connection Procedure (See Figure 2)
(1) Mount the M3T-DCT42B-450 on the target system.
(2) Connect the emulator and the converter board.
(3) Connect the M3T-DCT42B-450 and the converter board.
6. External Dimensions of the M3T-DCT42B-450
: Position of No. 1 pin
Be sure to align the pins.
Emulator
Converter board
M3T-DCT42B-450
1 : Pin No. of the M3T-DCT42B-450
1 : Pin No. of the upper connector
Figure 3 External dimensions of the M3T-DCT42B-450
Board
Upper connector
(J1)
Symbol
A 5.0
D 11.8
E 17.5
e 0.8
Upper connector J1:
AXK5S50045P
(made by Matsushita Electric Works, Ltd.)
Material: Glass epoxy board
Material: Heat tolerant resin (body)
Plating: Nickel-based gold plating
Dimension (mm)
Copper alloy (post, contact)
( 2 / 4 )
Loading...