Renesas M3A-HS60, SH7206 User Manual
REJ11J0002-0100Z
A
32
SH7206 CPU Board
M3
-HS60
User's Manual
Renesas32-Bit RISC Microcomputers
SuperHTM RISC Engine Family/SH7200 Series/SH7206 Group
Rev. 1.00
Issued:June 1,2005
f
r
r
r
r
Microsoft, MS-DOS, Windows and Windows.NET are registered trademarks of Microsoft Corporation of the U.S. in the U.S.
and other countries.
IBM and AT are registered trademarks of International Business Machines Corporation of the U.S.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
All other brand names and product names are registered trademarks or trademarks of the respective pr oprietors.
Requests for Safety Design
• Renesas is constantly making efforts to improve the quality and reliability of its products. However, not all
semiconductor products are trouble-free, they may become faulty or operate erratically. To ensure that no
accidents such as injury or a fire or no social dama ge may arise from Renesas semicon ductor products shou ld
they become faulty or operate erratically, please pa y careful attention to the safety design of your system b y,
for example, considering redundancy design and incorporating measures to check the spread of a fire and
prevent device malfunction.
Precautions on Using This Manual
• This manual only provides reference information to help customers p urchase the a ppropriate t ype of Renesas
Technology product that suits the intended purpose of use, and the technical information contained herein
does not implicitly or otherwise grant a license or rights to use the intellectual property or other rights o
Renesas Technology.
• Renesas Technology will not assume any responsibility for damage or losses or infringem ent on the third
parties’ rights arising from the use of product data, diagrams, tables, programs, algorithms or example
application circuits presented in this manual.
• The product data, diagrams, tables, programs, algorithms and all other information presented herein reflect
the latest that was available at the time this manual was issued, and Renesas T echnology reserves the right
to change the products or specifications described herein without prior notice. When purchasing Renesas
Technology semiconductor products, please contact Renesas T echnology or Renesas Technology Sales o
other distributors to obtain the latest information, and also keep abreast of the information publ ished at the
Renesas Technology home page (http://www.renesas.com) or through other media.
• The information contained herein was carefully prepared and is believed to be correct. However, Renesas
Technology will not assume responsibility for losses t hat the customers by any poss ibility ma y suffer because
of erroneous description in this manual.
• To use the technical contents in product data, diagrams or tables or the programs or algorithms presented
herein for your system, please carefully evaluate their suitability as part of the ent ire system, not singly as a
technical content, program or algorithm alone, to determine in advance whether they are actuall y suitable fo
your system. Renesas Technology will not assume responsibility for the suitability of said items in use
systems.
• The products presented herein are not designed or manufactured for use in equipment or systems that are
used under conditions where human life is concer ned. If you plan to use the products presented herein fo
special applications such as transportation, mobile, medical, aerospace, nuclear control or submarine
repeater equipment or systems, please consult Renesas T echnology or Renesas Technology S ales or other
distributors.
• This manual may not be copied or reproduced, in whole or part, without prior written consent of Renesas
Technology.
• For more detailed information or for questions or doubts about this manual, please consult Renesas
Technology or Renesas Technology Sales or other distributors.
Revision History SH7206 CPU Board M3A-HS60User's Manual
Rev. Date of Issue Content of Revision
Page Points
1.00 June 1.2005 - First edition issued.
Table of Contents
Chapter1 Overview..............................................................................................................................1-1
1.1 Overview ....................................................................................................................................................................1-2
1.2 Configuration.............................................................................................................................................................. 1-2
1.3 External Specifications............................................................................................................................................... 1-3
1.4 External View .............................................................................................................................................................1-4
1.5 M3A-HS60 Block Diagram.......................................................................................................................................... 1-5
1.6 M3A-HS60 Board Overview .......................................................................................................................................1-6
1.7 M3A-HS60 Memory Mapping.....................................................................................................................................1-8
1.8 Absolute Maximum Ratings........................................................................................................................................ 1-9
1.9 Recommended Operating Conditions ........................................................................................................................ 1-9
Chapter2 Functional Overview ............................................................................................................2-1
2.1 Functional Overview................................................................................................................................................... 2-2
2.2 CPU............................................................................................................................................................................ 2-3
2.2.1 SH7206.............................................................................................................................................................2-3
2.3 Memory ...................................................................................................................................................................... 2-4
2.3.1 SH7206's Internal RAM.....................................................................................................................................2-4
2.3.2 Flash Memory M5M29KT331AVP (included as standard equipment)...............................................................2-4
2.3.3 External SDRAM............................................................................................................................................... 2-6
2.4 Serial Port Interface.................................................................................................................................................... 2-9
2.5 I/O Ports...................................................................................................................................................................2-10
2.6 Power Supply Circuit................................................................................................................................................ 2-12
2.7 Clock Module............................................................................................................................................................ 2-13
2.8 Reset Module........................................................................................................................................................... 2-14
2.9 Interrupt Switches..................................................................................................................................................... 2-14
2.10 E10A-USB Interface...............................................................................................................................................2-15
Chapter3 Operational Specifications...................................................................................................3-1
3.1 M3A-HS60 Connectors Outline.................................................................................................................................. 3-2
3.1.1 H-UDI Connector (J1) ....................................................................................................................................... 3-3
3.1.2 Serial Port Connector (J2)................................................................................................................................. 3-4
3.1.3 External Power Supply Connectors(J3 and J5)................................................................................................. 3-5
3.1.4 Power Supply Connector (J4) ........................................................................................................................... 3-6
3.1.5 User I/O Connectors (J6-J8) ............................................................................................................................. 3-7
3.1.6 Extension Connectors (J9-J13)......................................................................................................................... 3-9
3.2 Outline of Switches and LEDs.................................................................................................................................. 3-13
3.2.1 Power Supply Select Jumpers (JP1 and JP2)................................................................................................. 3-14
3.2.2 Switch and LED Functions.............................................................................................................................. 3-15
3.3 Outline Dimensions of M3A-HS60............................................................................................................................ 3-17
Appendix .............................................................................................................................................A-1
M3A-HS60 Schematics
Rev. 1.00 June 1,2005
REJ11J0002-0100Z
(i)
Chapter1Overview
Chapter1
Overview
1-1
Overview
1
1.1 Overview
1.1 Overview
The M3A-HS60 is the CPU board designed for users to evaluate the function and perform ance of original microcomputers of
Renesas Technology the SH7206 series. With the board, you can develop and evaluate the application software for the
SH7206 series. The SH7206's data bus, address bus, and pins of various internal periph eral circuit func tion are conne cted to
the extension bus connector of the M3A-HS60. Thus, you can evaluate the timing relationshi ps with peripheral devices by
using measurement instruments. You can also develop extension boards depend ing on developm ent purpos es.
Furthermore, the E10A-USB, the on-chip emulator made by Renesas Technology, can be connected to the M3A-HS60.
1.2 Configuration
Figure1.2.1 shows an example system configuration using M3A-HS60.
SH7206 CPU Board
M3A-HS60
Power supply
(5V/1.5A or more)
*1
Application
Board
* Created according to
the intended application
High-performance
Embeded Workshop(HEW)
SuperH RISC engine
C/C++ compiler package
*1: Option Items:
It is necessary to prepare separately for software development.
SH7206
Extension
connector
HEW
*1
*1
Figure1.2.1 Example System Configuration of M3A-HS60
debugger
Host
Computer
Serial port connector
USB
*1
H-UDI/AUD
E10A-USB
*1
Rev.1.00 June 1,2005 1-2
REJ1 1J0002-0100Z
1
1.3 External Specifications
Table1.3.1 lists external specifications of M3A-HS60
Table1.3.1 External Specifications of M3A-HS60
No. Item Content
SH7206（R5S72060）
1 CPU
2 Memory
3 Connectors
4 LED
z Input(XIN)clock: 16.67MHz
z Bus clock: 66.67MHz,max
z CPU clock: 200MHz,max
Following items of memory are included.
zSDRAM: 32 Mbytes, max.
Following memory selectable by a DIP switch.
• When 16-bit bus width is selected
EDS1216AATA-75E x 1: 16 Mbytes
• When 32-bit bus width is selected
EDS1216AATA-75E x 2: 32 Mbytes
z Flash memory
• M5M29KT331AVP x 1: 4Mbytes
• Data bus width fixed to 16 bits
z Extension connector (bus, I/O, VCC, GND: 100 pins)
z User I/O connector (SH7206's MTU2 and A/D function pins: 32 pins)
z Serial port connector (D-sub 9 pins)
z H-UDI connector (36 pins)
z POWER LED (1 pc.)
z User LED（7 pcs.）
Overview
1.3 External Specifications
5 Switches
6 Package Dimensions
z Reset switch (1 pc.)
z MRES switch (1 pc.)
z NMI switch (1 pc.)
z User DIP switch (1 pc., 4 poles)
z System setup DIP switch (1 pc., 5 poles)
z Dimensions: 100 mm x 100 mm
z Mounting form: 4-layer, double-side mounted
z Board configuration: 1 board
Rev.1.00 June 1,2005 1-3
REJ1 1J0002-0100Z
1
1.4 External View
Figure1.4.1 shows the external view of M3A-HS60.
Overview
1.4 External View
Figure1.4.1 External View of M3A-HS60
Rev.1.00 June 1,2005 1-4
REJ1 1J0002-0100Z
1
1.5 M3A-HS60 Block Diagram
Figure1.5.1 shows the system block diagram of M3A-HS60.
Overview
1.5 M3A-HS60 Block Diagram
Flash memory
4MB
16 16 or 32
SH7206 CPU Board
M3A-HS60
H-UDI
Extension connector
Figure1.5.1 System Block Diagram of M3A-HS60
Serial port
connector
SH7206
200MHz
16 or 32
External:66.67MHz
Enables to connect extension boards, or
enables to monitor all of bus and peripheral
I/O signals.
User I/O Connector
SDRAM
16MB x 2
Rev.1.00 June 1,2005 1-5
REJ1 1J0002-0100Z
1
or
J4
1.6 M3A-HS60 Board Overview
Figure1.6.1 shows the M3A-HS60 board overview.
SW1
Power
Switch
Top view of the
Component side
LED6-8
User LED
U5
JP1,JP2
Power Supply
Select Jumper
SDRAM
(16MB)
Power
Supply
Connector
Overview
1.6 M3A-HS60 Board Overview
LED1
Power LED
SW4
System setup
DIP switch
J1
H-UDI Connect
(36-pin)
SW2
Reset
Switch
Top view of the
Solder side
U10
3.3V Power
Regulator
U12
1.25V Power
Regulator
LED2-5
User
LED
J6 J7
U3
SW5
NMI
Switch
U8
SDRAM
(16MB)
Flash
Memory
SW3
User
DIP Switch
U2
Clock
Buffer
(not mounted)
J12
J13
U1
SH7206
X1
Oscillator
16.67MHz
J3 J5
U9
RS-232C
Driver
U4
SW6
MRES
Switch
J2
Serial Port
Connector
J6
U7
Address Shift
Buffer
J11
J9
U6
Logic IC(LVC14)
U11
Reset IC
J10
:Extension connector(not mounted)
Figure1.6.1 M3A-HS60 Board Overview
Rev.1.00 June 1,2005 1-6
REJ11J0002-0100Z
1
Table1.6.1 lists main components mounted in M3A-HS60.
Table1.6.1 Main Components Mounted in M3A-HS60
Symbol Component name
U1 CPU SH7206 (by Renesas)
U2 Clock Buffer Not mounted CY2305SC-1 (by Cypress)
U3 Flash Memory M5M29KT331AVP
(by Renesas)
U4,U7 Address Shift Buffer
U5,U8 SDRAM EDS1216AATA-75
U6 Logic IC
U9 RS-232C Driver
U10 3.3V Power Regulator
U11 Reset IC M51957BFP (by Renesas)
U12 1.25V Power Regulator
X1 16.67MHz Oscillator 16.67MHz
X2 Ceramic Resonators Not mounted, 16.67MHz CSTCE-G16M67
J1 H-UDI Connector
J2 Serial port Connector
J3,J5 External Power Supply Connector Not mounted A2-2PA-2.54DSA
J4 Power Supply Connector
J6 Extension connector Not mounted,
26pin MIL Standard Connector
J7, J8 Extension connector Not mounted,
3pin MIL Standard Connector
J9, J11, J13 Extension connector Not mounted,
20pin MIL Standard Connector
J10, J12 Extension connector Not mounted,
40pin MIL Standard Connector
LED1 Power LED Red
LED2-8 User LED Green
SW1 Power Switch
SW2 Reset Switch
SW5 NMI Switch
SW6 MRES Switch
SW3 User DIP Switch
SW4 System setup DIP Switch
Note
1.6 M3A-HS60 Board Overview
Recommended parts’
number for not mounted
components (Makers)
(by Murata)
(by Hirose)
XG4C-2634 Right angle
A2-3PA-2.54DSA
XG4C-2031
XG4C-4031
Overview
Rev.1.00 June 1,2005 1-7
REJ11J0002-0100Z
1
1.7 M3A-HS60 Memory Mapping
Figure1.7.1 shows the memory mapping example of SH7206 in the M3A-HS60.
Logical address Logical space of theSH7206 Memory Mapping of theM3A-HS60
H'0000 0000
H'003F FFFF
H'0400 0000
H'0800 0000
H'0C00 0000
H'0CFF FFFF
H'0DFF FFFF
CS0 space:64MB
CS1 space:64MB User area
CS2 space:64MB User area
CS3 space:64MB
Flash Memory(4MB)
16-bit bus
User area
SDRAM(32MB)
32-bit bus
Overview
1.7 M3A-HS60 Memory Mapping
SDRAM(16MB)
16-bit bus
User area
H'1000 0000
H'1400 0000
H'1800 0000
H'1C00 0000
H'2000 0000
H'4000 0000
H'8000 0000
H'FFF8 0000
H'FFFA 0000
H'FFFC 0000
H'FFFF FFFF
Note: There is the cacheable area from H’0000 0000~H’1FFF FFFF.
CS4 space:64MB User area
CS5 space:64MB User area
CS6 space:64MB
CS7 space:64MB
CS0-CS7 spaces
(non-cacheable area)
CS8 space:1GB User area
Internal RAM(128KB) Internal RAM(128KB)
Internal RAM, Reserved Internal RAM, Reserved
Internal peripheral module Internal peripheral module
User area
Reserved area
(Disabled)
Reserved area
(Disabled)
Reserved area
(Disabled)
CS0-CS7 spaces
(non-cacheable area)
Reserved area
(Disabled)
Figure1.7.1 Memory Mapping Example of SH7206
Rev.1.00 June 1,2005 1-8
REJ11J0002-0100Z
1
1.8 Absolute Maximum Ratings
Table1.8.1 lists the absolute maximum ratings of M3A-HS60.
Table1.8.1 Absolute Maximum Ratings of M3A-HS60
Symbol Parameter Rated Value Remarks
VCC 5V System Power Supply Voltage -0.3V to 6.0V Relative to VSS
3VCC 3.3V System Power Supply Voltage -0.3V to 4.6V Relative to VSS
1.2VCC 1.25V System Power Supply Voltage -0.3V to 1.7V Relative to VSS
Topr Operating Ambient Temperature -5°C to 55°C No dewdrops allowed.
Use in corrosive gas environment prohibited.
Tstr Storage Ambient Temperature -10°C to 60°C No dewdrops allowed.
Use in corrosive gas environment prohibited.
Note: The ambient temperature refers to the air temperature in the closest place from the board.
1.9 Recommended Operating Conditions
Overview
1.8 Absolute Maximum Ratings
Table1.9.1 lists the recommended operating conditions of the M3A-HS60.
Table1.9.1 Recommended Operating Conditions of M3A-HS60
Symbol Parameter Rated Value Remarks
VCC 5V System Power Supply Voltage 4.75V to 5.25V Relative to VSS
3VCC 3.3V System Power Supply Voltage 3.0V to 3.6V Relative to VSS
(Normally supplied from regulator)
1.2VCC 1.25V System Power Supply Voltage 1.15V to 1.35V Relative to VSS
(Normally supplied from regulator)
– Maximum Power Consumption in the Board Within 1A
Topr Operating Ambient Temperature 5°C to 50°C No dewdrops allowed.
Use in corrosive gas environment prohibited.
Rev.1.00 June 1,2005 1-9
REJ11J0002-0100Z
1
Overview
1.8 Absolute Maximum Ratings
This is a blank page
Rev.1.00 June 1,2005 1-10
REJ11J0002-0100Z
Chapter2Functional Overview
Chapter2
Functional Overview
2-1
2
2.1 Functional Overview
Table2.1.1 lists the functional modules of M3A-HS60.
Table2.1.1 Functional Modules of M3A-HS60
Sections Function Content
Functional Overview
2.1 Functional Overview
2.2 CPU
2.3 Memory
2.4 Serial port interface
2.5 I/O ports
2.6 Power Supply Circuit
2.7 Clock Module
2.8 Reset Module
2.9
2.10 E10A-USB Interface
–
Interrupt switches
Operational specifications
SH7206
zInput(XIN)clock : 16.67MHz
zBus clock : 66.67MHz,max
zCPU clock : 200MHz,max
Following items of memory are included
z SDRAM: 32 Mbytes, max
By switching a DIP switch, the following memories can be selected.
• When 16-bit bus width is selected
EDS1216AATA-75E x 1: 16 Mbytes
• When 32-bit bus width is selected
EDS1216AATA-75E x 2: 32 Mbytes
z Flash memory
• M5M29KT331AVP x 1: 4 Mbytes
• Data bus width fixed to 16 bits
Connects SCIF0 of the SH7206 to the Serial port connector.
Connects to the I/O ports of the SH7206
Controls the system power supply of the M3A-HS60
Controls the clock
Controls device reset mounted on the M3A-HS60
Connects to NMI and MRES pins
SH7206 H-UDI/AUD interface
Connectors, switches and LEDs
z SH7206 extension connector
z Switches and LEDs
z H-UDI connector
Detailed in Chapter 3.
Rev.1.00 June 1,2005 2-2
REJ1 1J0002-0100Z
Functional Overview
SH7206
A
er
er
2
2.2 CPU
2.2.1 SH7206
The M3A-HS60 contains SH7206, the 32-bit RISC microcomputer, which operates with a maximum 200MHz of CPU
clock frequency. The SH7206 includes 128-Kbyte RAM, 8-Kbyte instruction cache and 8-Kbyte data cache, and it can
deal with a wide range of applications from data processing to equipment control.
The M3A-HS60 can be operated with a maximum 200MHz of CPU clock frequency (external bus 66.67MHz, max.)
using a 16.67MHz input clock.
Figure2.2.1 shows the block diagram of SH7206 in the M3A-HS60.
2.2 CPU
Clock
3.3V
Mode
System
Control
ddress bus
Data bus
Bus control
GND
GND
EXTAL
XTAL
CKIO
CS0 space
MD2
Fixed 16-bit bus
MD0
MD_CLK2
MD_CLK0
RES#
MRES#/TIOC4B/PE13
WDTOVF#
BREQ#/TEND0/PINT2/PA18
BACK#/TEND1/PINT3/PA19
A25/DREQ0/IRQ0/SCK0/PA2
A24/RXD1/PA3
23
A23-A1
A0/PC0
D31/TIOC3AS/ADTRG#/PD31
D30/TIOC3CS/IRQOUT#PD30
D29/CS3#/TIOC3BS/PD29
D28/CS2#/TIOC3DS/PD28
D27/DACK1/TIOCS4AS/PD27
D26/DACK0/TIOC4BS/PD26
D25/DREQ1/TIOC4CS/PD25
D24/DREQ0/TIOC4DS/PD24
D23/IRQ7/PD23
D22/IRQ6/TIC5US/PD22
D21/IRQ5/TIC5VS/PD21
D20/IRQ4/TIC5WS/PD20
D19/IRQ3/POE7#/PD19
D18/IRQ2/POE6#/PD18
D17/IRQ1/POE5#/PD17
D16/IRQ0/POE4#/PD16
16
D15-0
CS0#
CS1#/POE5#/PA11
CS2#/TCLKA/PA6
CS3#/TCLKB/PA7
CS4#/RASU#/PINT4/PA20
CS5#/CE1A#/CASU#/PINT5/TIC5U/PA21
CS8#/PE16
CE2A#/DREQ3/PINT6/PA24
CE2B#/DACK3/PINT7/POE8#/PA25
Mode 2
WE1#/WE#/DQMLU#/POE7#/PA13
WE2#/ICIORD#/DQMUL#/TIC5V/PA22
WE3#/ICIOWR#/AH#/DQMUU#/TIC5W/PA23
FRAME#/CKE/TCLKD/IRQ3/PA9
BS#/RXD2/TIOC2B/UBCTRG/PE7
DACK1//CKE/TIOC4D/IRQOUT#/PE15
WE3#/ICIOWR#/AH#/DACK0/TIOC4C/PE14
WAIT#/DACK2/PA17
WE0#/DQMLL/#POE6/PA12
RD_WR#/IRQ2/TCLKC/PA8
RASL#IRQ2/#POE2/PB4
CASL#/IRQ3/POE3#PB5
SCK2/TIOC3A/PE8
IRQ1/POE1/SDA/PB3
IRQ0/POE0#/SCL/PB2
TXD2/TIOC3C/PE10
TEND0/TIOC0B/PE1
DREQ1/TIOC0C/PE2
SCK3/TIOC3B/RTS3#/PE9
TXD3/TIOC4A/PE12
RXD3/TIOC3D/CTS3#
AUDATA0-3
ASEBRKAK#/ASEBRK#
AUDSYNC#
ASEMD#
ASEBCK
ASEBRK#
AN0-AN5/PF0-PF5
AN6/DA0/PF6
AN7/DA1/PF7
RD#
NMI#
TCK
TMS
TDI
TDO
TRST#
AUDCK
TXD0
RXD0
Bus control
IRQ/SCI/IIC
DMAC/GPIO
MTU2
4
6
NMI
E10A-USB
Interface
Serial port
Interface
A/D Convert
D/A Convert
Figure2.2.1 Block Diagram of SH7206
Rev.1.00 June 1,2005 2-3
REJ1 1J0002-0100Z
Functional Overview
M5M29KT331AVP
2
2.3 Memory
2.3 Memory
The M3A-HS60 includes the internal RAM of the SH7206 (128 Kbytes), external Flash memory, and external SDRAM.
These memory chips are detailed below.
2.3.1 SH7206's Internal RAM
The SH7206 contains an internal 128-Kbyte RAM.
2.3.2 Flash Memory M5M29KT331AVP (included as standard equipment)
The M3A-HS60 includes the Flash memory shown in Table2.3.1 as standard equipment. The memory can be used as
the storage in which to save the user program. The Flash memory to boot is fixed to 16-bit mode of external bus and
operates with a single 3.3 V power supply voltage. The write-protect of Flash memory can be enabled or disabled by
using a DIP switch.
Figure2.3.1 shows a block diagram of Flash memory.
Table2.3.2 lists bus state controller settings (write/read) for operation with the SH7206 bus clock at 66.67MHz.
Table2.3.1 Outline of the Flash Memory
Part Number Bus Size Capacity Access Time
M5M29KT331AVP 16-bit mode 4 Mbytes(16 bits × 2 Mword × 1pc.） 70ns
SH7206
A21
A20-A1
D15-D0
RD#
WE0#
CS0#
DIP SW
RES#
3.3V
20
16
A20
A19-A0
DQ15-DQ0
3.3V
NC
BYTE#
OE#
WE#
CE#
RP#
RY/BY#
WP#
(2 M Word x16 bit)
Figure2.3.1 Block Diagram of Flash Memory
Rev.1.00 June 1,2005 2-4
REJ1 1J0002-0100Z
Loading...