To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
st
, 2010
Send any inquiries to http://www.renesas.com/inquiry
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such informatio n is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Ren esas E lectronics data sheets or dat a books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electron ic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other appl i cations or purposes that pose a d irect threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as t he occu rrence o f failure at a certai n rate an d malfunct io ns under cert ain u se con dition s. Further,
Renesas Electronics prod ucts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation an d also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
M38C29T-64LCA
Converter Board for Connecting 100-pin RFS Type Emulator MCU to 64-pin 0.8-mm-pitch QFP/LQFP
(for 38000 Series 38C1, 38C2, 38K0 and 38K2 Groups)
User's Manual
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Rev.2.00
Feb. 20, 2008
REJ10J0068-0200
(1/4)
1. Outline
The M38C29T-64LCA is a converter board which connects the
100-pin RFS type emulator MCU (M38C13RLFS,
M38C29RLFS, M38K09RFS, M38K29RFS) to a foot pattern
for 64-pin 0.8-mm-pitch QFP (PRQP0064GA-A) and 64-pin
0.8-mm-pitch LQFP (PLQP0064GA-A).
2. Package Components
(1) M38C29T-64LCA x1
(2) M38C29T-64LCA User's Manual (This manual) x1
* When using the M38C29T-64LCA, the following IC socket
is required. Purchase it separately.
- 64-pin LCC socket
- IC61-0644-088: manually soldering type
(made by Yamaichi Electronics Co., Ltd.)
3. Specifications
Table 1 Specifications
PRQP0064GA-A (former name:64P6N-A)
Applicable
package
(64-pin 0.8-mm-pitch QFP)
PLQP0064GA-A (former name:64P6U-A)
(64-pin 0.8-mm-pitch LQFP)
4. Usage
4.1 Oscillator Circuit
The M38C29T-64LCA has two kinds of oscillator circuit
patterns for the main clock XIN and the sub clock XCIN.
Depending on the configuration of an oscillator circuit on the
user system use them as follows.
(1) To use the internal oscillator circuit of the MCU
Because the converter board exists between the emulator
MCU and the user system, the oscillator on the user system
may not be able to oscillate. In this case, mount an
oscillator circuit on an oscillator circuit pattern (see
Figures 2 and 3) of the M38C29T-64LCA. And, to confirm
its oscillation, check output waveforms of pins XOUT and
XCOUT using an oscilloscope.
(2) To use an oscillator module IC
You do not need to mount an oscillator circuit on oscillator
circuit pattern of the M38C29T-64LCA.
M38C29T-64LCA board
100-pin LCC socket
GND test pin
RESET test pin
64-pin header : 64D0 (J2)
Figure 1 External view of the M38C29T-64LCA
RST test pin
X1
C4
: GND
C2
C1
R1
C3
X2
GND test pin
Figure 2 Parts layout of oscillator circuits
C2
X
IN
J1- 45, J2-12
X
OUT
J1- 46, J2-13
X1
C1
X
C3
R1
X2
C4
CIN
X
COUT
J1- 43, J2-10
J1- 42, J2- 9
Figure 3 Connection diagrams of the oscillator circuits
(2/4)
4.2 Connecting to User System
Connect the M38C29T-64LCA to the user system as follows.
(1) Set the head of the screw for releasing the LCC socket at
Polarizing pin
"LOCK" on the board as shown in Figure 4. Turn the
screw until it clicks.
(2) Mount the 64-pin header of the M38C29T-64LCA to the
64-pin LCC socket aligning the polarizing pin.
(3) The 64-pin header and 64-pin LCC socket are rated at 50
mate/demate cycles.
Figure 4 Connecting to the user system
4.3 Removing from User System
Remove the M38C29T-64LCA from the user system as
Polarizing pin
follows.
(1) Turn the screw for releasing the LCC socket clockwise as
shown in Figure 5.
(2) The M38C29T-64LCA is pushed out from the 64-pin LCC
socket.
(3) After the socket is removed, turn the screw until it clicks.
Figure 5 Removing from the user system
5. External Dimensions of the M38C29T-64LCA
E
No. 1 pin
H
F
G
J1
J2
GND
RST
Figure 6 External dimensions of the M38C29T-64LCA
A
B
M38C29T- 64LCA
64
1
LOCK
LOCK
LOCK
64
M38C29T- 64LCA
RELEASE
1
C
D
64
1
64-pin LCC socket
64
1
64-pin LCC socket
Symbol Dimension [mm]
A 17.2
B 8.7
C 21.3
D 24.2
E 70.0
F 48.7
G 21.3
H 26.7
(3/4)
6. Precautions
CAUTION
Cautions to Be Taken for This Product:
z Before mounting the M38C29T-64LCA, be sure to check the pin positions.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
7. Correspondence of the Connectors
Table 2 Correspondence of connectors J1 and J2
J1 connector
Pin No.
1 - 26 - 51 - 76 2 - 27 - 52 - 77 3 - 28 - 53 - 78 4 - 29 - 54 - 79 5 - 30 - 55 - 80 6 - 31 - 56 - 81 7 - 32 - 57 - 82 8 49 33 1 58 17 83 33
9 50 34 2 59 18 84 34
10 51 35 3 60 19 85 35
11 52 36 4 61 20 86 36
12 53 37 5 62 21 87 37
13 54 38 6 63 22 88 38
14 55 39 7 64 23 89 39
15 56 40 - 65 24 90 40
16 57 41 8 66 25 91 41
17 58 42 9 67 26 92 42
18 59 43 10 68 27 93 43
19 60 44 11 69 28 94 44
20 61 45 12 70 29 95 45
21 62 46 13 71 30 96 46
22 63 47 14 72 31 97 47
23 64 48 15 73 32 98 48
24 - 49 16 74 - 99 25 - 50 - 75 - 100 -
("-": No connection)
J2 connector
Pin No.
J1 connector
Pin No.
J2 connector
Pin No.
J1 connector
Pin No.
J2 connector
Pin No.
J1 connector
Pin No.
J2 connector
Pin No.
(4/4)
Loading...