Renesas M37531T-ADS User Manual

M37531T-ADS

Temporary Target Board for M37531RSS, M37532RSS, M37534RSS,

M37536RSS, M37540RSS, M37542RSS, M37544RSS

User's Manual

Rev.1.00
September 1, 2003
REJ10J0367-0100Z

• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better
and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal
injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any
malfunction or mishap.

Keep safety first in your circuit designs!

• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to
the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas
Technology Corporation, Renesas Solutions Corporation or a third party.

• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples
contained in these materials.

• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas
Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest
product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or
typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage,
liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology
Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms,
please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and
products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or
other loss resulting from the information contained herein.

• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances
in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an
authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce
in whole or in part these materials.

• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the
Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to
the export control laws and regulations of Japan and/or the country of destination is prohibited.

• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products
contained therein.

Notes regarding these materials

• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing
integration test, evaluation, or some experiment else.

• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.

• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall
under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in
Japan.

For inquiries about the contents of this document or product, fill in the text file the installer of the emulator debugger generates in the
following directory and email to your local distributor.

\SUPPORT\Product-name\SUPPORT.TXT
Renesas Tools Homepage http://www.renesas.com/en/tools

Precautions to be taken when using this product

( 2 / 12 )

Contents

1. Things to Check When Unpacking.....................................................................................4

2. Outline ................................................................................................................................4

3. Specifications .....................................................................................................................4

4. Setting Up ...........................................................................................................................5

5. Oscillator Circuit ................................................................................................................7

5.1 Oscillator Circuit Board ........................................................................................7

5.2 Using the CR Oscillator Circuit Pattern................................................................8

6. Pin Layout ..........................................................................................................................9

( 3 / 12 )

1. Things to Check When Unpacking

The M37531T-ADS package consists of the following products. When unpacking your package,
check to see that all of these components are included.

Table 1.1 Package components

Temporary target board

User's manual

* If you find any item missing or faulty, or any suggestion, contact your local distributor.

2. Outline

The M37531T-ADS is a temporary target board used to develop software with a PC4701 emulator
system. It supplies to the emulator MCU the minimum required signals needed to operate the 7531/
7532/7534/7536/7540/7542/7544 Group RSS MCUs, including power supply voltage, clock signals
and reset signals. Use it when the target system is not ready.

3. Specifications

Table 3.1 lists specifications of the M37531T-ADS.

Table 3.1 Specifications of the M37531T-ADS

Applicable MCU

M37531T-ADS
M37531T-ADS User's manual (this manual)

M37531RSS
M37532RSS
M37534RSS
M37536RSS
M37540RSS
M37542RSS
M37544RSS

Clock
Vcc
Vss
RESET

External dimensions Width

Depth

Others

4.0MHz oscillator mounted (oscillator circuit board OSC-2 used)
Supplied separately*
Supplied separately*

• Reset circuit mounted (power-on reset and reset switch)

• Connects the reset output of an emulation pod
90 mm
115 mm

• Pattern for CR oscillator prepared

• Universal part prepared

* Power cannot be supplied from the emulation pod for PC4701 (e.g. M38000TL2-FPD). A

separate power supply is needed.

( 4 / 12 )