Renesas M37530T-PTCB User Manual

M37530T-PTCB

Converter Board for 32-pin 0.8mm pitch LQFP for 7534, 7540, 7542, 7544 and 7546 Groups

User’s Manual

 Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products

better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.

 These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited

to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

 Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of

any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.

 All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information

on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).

 When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and

algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.

 Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under

circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

 The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or

reproduce in whole or in part these materials.

 If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from

the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

 Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the

products contained therein.

 This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your

program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.

 In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
 Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.

However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.

 This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not

fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.

CAUTION

Renesas Tools Homepage http://www.renesas.com/en/tools

Keep safety first in your circuit designs!

Notes regarding these materials

Precautions to be taken when using this product

If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.

Rev.2.00
Sep. 11, 2006
REJ10J0813-0200

(1/4)

1. Outline

The M37530T-PTCB, by combining with the M37530T-PTC
converter board, is a converter board for connecting the 42DIP
package to the package for 32-pin 0.8mm pitch LQFP
(PLQP0032GB-A).

2. Package Components (See Figure 1)

(1) M37530T-PTCB converter board................................ 1 pc.

(2) TQSOCKET032SAF................................................... 1 pc.

(3) TQPACK032SA.......................................................... 1 pc.

(4) M37530T-PTCB User's Manual (This manual)

3. Specifications

1 Specifications

Table

PLQP0032GB-A

Applicable package

(Previous code: 32P6U-A)

(32-pin 0.8mm pitch LQFP)

Insertion/removal

iterations of connector

50 times

guaranteed

4. Usage

The M37530T-PTCB can only be used for debugging.
The M37530T-PTCB can be used for debugging and on-board
evaluation in common by mounting the NQPACK032SA (not
included) on the user system.

(1) For debugging 1

Mount the TQPACK032SA on the foot pattern of the user
system and attach the TQSOCKET032SAF on it. And
connect the M37530T-PTCB to the TQSOCKET032SAF.

(2) For debugging 2 (Using NQPACK)

Mount the NQPACK032SA (not included) on the foot
pattern of the user system and attach the YQPACK032SA
(not included) on it. Next, mount two of the
YQSOCKET032SAF (not included) on M37530T-PTCB.
Then connect the M37530T-PTCB to the
YQPACK032SA

(3) For on-board evaluation

Mount an MCU with QzROM and HQPACK032SA (not
included) in that order on the NQPACK032SA (not
included) of the user system.

Before using the M37530T-PTCB, be sure to read "7.
Precautions" on page 4.

(1)M37530T-PTCB

(2)TQSOCKET032SAF

(3)TQPACK032SA

Figure 1 Package components of the M37530T-PTCB

Emulator

Emulator MCU

M37530T-PTCB

(1) For debugging 1

TQSOCKET032SAF

TQPACK032SA

●: No.1 pin

Be sure to align the pins

No. 1 pin

No. 1 pin

M37530T-PTC

(not included)

(2) For debugging 2

YQSOCKET032SAF

(not included)

YQSOCKET032SAF

(not included)

YQ-GUIDE-S1 x4

(not included)

YQPACK032SA

(not included)

NQPACK032SA

(not included)

32-pin 0.8mm pitch LQFP(PLQP0032GB-A)

(Previous code: 32P6U-A) foot pattern

(3) On-board evaluation

HQPACK032SA

(not included)

MCU with QzROM

or FLASH

Figure 2 Usage of the M37530T-PTCB

(2/4)