M37515T-PTC
Converter Board for Connecting 64-core Flexible Board FLX64 or M3T-64DIP-DMS
to 48-pin 0.5mm pitch LQFP for 7515 and 7516 Groups
User’s Manual
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Rev.2.00
Aug. 01, 2007
REJ10J0393-0200
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/4)
1. Description
PLQP0048KB-A (formerly: 48P6Q-A)
This product converts the 64-pin LCC package (64D0)
for 7515 and 7516 Group MCUs to the pin
assignments of the 48-pin 0.5mm pitch LQFP package
(PLQP0048
KB-A), and connects the emulator and target.
2. Package Components (see Figure 1)
(1) M37515T-PTC converter
(2) TQSOCKET048SDP
(3) TQPACK048SD
(4) M37515T-PTC Instruction Manual (this manual)
board
3. Specifications
Table 1 Specifications
Item Description
Package
(48-pin 0.5mm
4
pitch LQFP)
Insertion/removal
iterations of
20 times guaranteed
connector
4. Application (see Figure 2)
product can be used during debugging and board-
This
mounted evaluation in common.
(1) For debugging
Mount TQPACK048SD on the target. On top of it,
mount TQSOCKET048SDP and M37515T-PTC in
that order. Then connect the probe of the
emulation pod to the connector provided at the top
of M37515T-PTC.
(1) M37515T-PTC main unit
(2) TQSOCKET0 4 8 SD P (3) TQPACK048S D
Figure 1 Package components of M37515T-PTC
(1) For debugging (2) For board-mounted
evaluation
M37515T-RPD
M37515T-PTC
64LCC-DMS
: position of No. 1 pin
Be sure to match the position of
No. 1 pin of the foot pattern and
each part.
Figure 2 Usage of M37515T-PTC
M37515T-PTC
(2) For board-mounted evaluation
Mount the 64-pin LCC MCU to 64LCC-DMS.
Before using M37530T-PTCB, be sure to read the
precautions on page 4.
5. Connection Procedure (see Figure 3)
The connection procedure of M37515T-PTC is shown
below.
(1) Mount the TQPACK048SD.
(2) Attach the TQSOCKET048SDP to the TQPACK048SD.
(3) Attach the M37515T-PTC to the TQSOCKET048SDP.
(2/4)
(3)
TQSOCKET048SDP
(2)
(1)
TQPACK048SD
Figure 3 Connection procedure of M37515T-PTC
6. External Dimensions of M37515T-PTC
D
1
MADE IN JAPAN
48 37
1
J2
CN1
20
M37515T-PTC REV.A
1
2
13
C
A
36
40
J1
21
2
5
24
b
E
Symbol
A
b
C
D
E
Dimension [mm]
26.0
0.25
0.5
22.0
22.0
Figure 4 External dimensions of M37515T-PTC
7. Target Foot Pattern
Figure 5 shows the foot pattern for TQPACK made by Tokyo Eletech Corporation.
C
e
D
Figure 5 External dimensions of target system
Symbol
C
D
e
Dimension [mm]
5.5
10.0
1.75
(3/4)
7. Precautions
8.
9.
In this manual
64LCC-DMS
->
Actual part number
M3T-64LCC-DMS
Note:
Some part numbers in this user's manual can be referred to as the following.
CAUTION
Cautions To Be Taken for This Product:
• We cannot accept any request for repair.
• For purchasing TQPACK048SD and TQSOCKET048SDP, contact the following.
.
Tokyo Eletech Corporation
Phone: +81-3-5295-1661 Fax: +81-3-5295-1663
E-mail: info@tetc.co.jp URL: http://www.tetc.co.jp/
E
• For inquiries about the product or the contents of this manual, contact your local distributor.
.
Renesas Tools Homepage http://www.renesas.com/tools
8. Correspondence of Connectors J1, J2 and CN1
Table 2 lists the correspondence of connectors J1, J2 and CN1.
Table 2 Correspondence of connectors J1, J2 and CN1
Connector
pin No.
J1-1
J1-2
J1-3
J1-4
J1-5
J1-6
J1-7
J1-8
J1-9
J1-10
J1-11
J1-12
J1-13
J1-14
J1-15
J1-16
J1-17
J1-18
J1-19
J1-20
CN1
pin No.
NC
NC
NC
NC
37
38
39
40
41
42
19
20
21
22
23
NC
NC
NC
NC
NC
Connector
pin No.
J1-21
J1-22
J1-23
J1-24
J1-25
J1-26
J1-27
J1-28
J1-29
J1-30
J1-31
J1-32
J1-33
J1-34
J1-35
J1-36
J1-37
J1-38
J1-39
J1-40
CN1
pin No.
NC
NC
NC
24
25
26
27
28
29
30
31
32
33
34
35
36
NC
NC
NC
NC
Connector
pin No.
J2-1
J2-2
J2-3
J2-4
J2-5
J2-6
J2-7
J2-8
J2-9
J2-10
J2-11
J2-12
J2-13
J2-14
J2-15
J2-16
J2-17
J2-18
J2-19
J2-20
CN1
pin No.
NC
NC
NC
NC
2
3
4
5
6
7
8
9
10
11
12
13
NC
NC
NC
NC
Connector
pin No.
CN1
pin No.
J2-21
J2-22
J2-23
J2-24
J2-25
J2-26
J2-27
J2-28
J2-29
J2-30
J2-31
J2-32
J2-33
J2-34
J2-35
J2-36
J2-37
J2-38
J2-39
J2-40
(NC: not connected)
NC
NC
NC
NC
NC
14
15
16
17
18
43
44
45
46
47
48
1
NC
NC
NC
(4/4)
Loading...