To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
st
, 2010
Send any inquiries to http://www.renesas.com/inquiry
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such informatio n is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Ren esas E lectronics data sheets or dat a books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electron ic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other appl i cations or purposes that pose a d irect threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as t he occu rrence o f failure at a certai n rate an d malfunct io ns under cert ain u se con dition s. Further,
Renesas Electronics prod ucts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation an d also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
M34559T-PTCB
Converter Board for Connecting to 52-pin 0.65mm pitch LQFP of 4559 Group
User’s Manual
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.01
Sep. 01, 2007
REJ10J1487-0101
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/4)
1. Outline
The M34559T-PTCB, combined with the M34559T2-CPE
compact emulator, is a converter board for connecting a foot
pattern for 52-pin 0.65mm pitch LQFP package
(PLQP0052JA-A) of the 4559 group.
2. Package Components (See Figure 1)
(1) M34559T-PTCB converter board................................ 1 pc.
(2) NQPACK052SB
(3) YQPACK052SB
(4) YQSOCKET052SBF
(made by Tokyo Eletech Corporation) ................ 1 pc.
(made by Tokyo Eletech Corporation) ................ 1 pc.
(made by Tokyo Eletech Corporation) ......... 1 pc.
Pre-mounted on the converter board M34559T-PTCB
(5) YQ-GUIDE-S1
(made by Tokyo Eletech Corporation) .................4 pcs.
(6) M34559T-PTCB User's Manual (This manual)
3. Specifications
Table
1 Specifications
PLQP0052JA-A
Applicable package
(Previous code: 52P6A-A)
(52-pin 0.65mm pitch LQFP)
Insertion/removal
iterations of connector
20 times
guaranteed
4. Usage (See Figure 2)
The M34559T-PTCB can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK052SB on the user system.
(1) For debugging
Mount the NQPACK052SB on the foot pattern of the user
system and attach the YQPACK052SB on it. Then
connect the M34559T-PTCB to the YQPACK052SB.
(2) For onboard evaluation
Mount the OzROM MCU first, and HQPACK052SB
(separately available) on the NQPACK052SB on the user
system.
Before using the M34559T-PTCB, be sure to read "6.
Precautions" on page 3.
M34559T-PTCB
YQ-GUIDE-S1 (4 pcs.)
YQPACK052SB
NQPACK052SB
Figure 1 Package components of the M34559T-PTCB
64-wire half-pitch cable
● indicates No.1 pin pos ition
* :These are included with the package of the M34559T-PTCB
(3)
M34559T-PTCB
(4)
YQ-GUIDE-S1 (x4) *
YQPACK052SB*
(2)
NQPACK052SB*
(1)
52-pin 0.65mm pitch
LQFP foot pattern
For onboard evaluation
HQPACK052SB
(separately available)
Figure 2 Usage of the M34559T-PTCB
MCU
(2/4)
5. External Dimensions
75.0
20.0
M34559T-PTCB REV.A
MADE IN JAPAN
45.0
25.5
Figure 3 External dimensions of the M34559T-PTCB
6. Precautions
Caution to Be Taken for This Product:
z When connecting the YQPACK052SB, be sure to use the included YQ-GUIDE’s.
z Do NOT use the screws included with the YQPACK052SB for connecting the YQPACK052SB.
IMPORTANT
CAUTION
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK052SB, YQPACK052SB, HQPACK052SB, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
(3/4)
7. Correspondence of Connectors
Table 2 Correspondence of the connectors
MCU Pin No. Signal MCU Pin No. Signal
1 D2 52 D1
2 D3 51 D0
3 D4 50 P33/SEG31
4 D5/INT 49 P32/SEG30
5 CNVSS 48 P31/SEG29
6 XCIN/D6 47 P30/SEG28
7 XCOUT/D7 46 P23/SEG27
8 RESET 45 P22/SEG26
9 XOUT 44 P21/SEG25
10 VSS 43 P20/SEG24
11 XIN 42 P13/SEG23
12 VDD 41 P12/SEG22
13 C/CNTR 40 P11/SEG21
14 VDCE 39 P10/SEG20
15 COM0 38 P03/SEG19
16 COM1 37 P02/SEG18
17 COM2 36 P01/SEG17
18 COM3 35 P00/SEG16
19 SEG0/VLC3 34 SEG15
20 SEG1/VLC2 33 SEG14
21 SEG2/VLC1 32 SEG13
22 SEG3 31 SEG12
23 SEG4 30 SEG11
24 SEG5 29 SEG10
25 SEG6 28 SEG9
26 SEG7 27 SEG8
(“-“: No connection)
(4/4)
Loading...