M34553T-PTCB
Converter Board for 48-pin 0.5-mm-pitch LQFP (4553 Group)
User’s Manual
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
CAUTION
Renesas Tools Homepage http://www.renesas.com/en/tools
Keep safety first in your circuit designs!
Notes regarding these materials
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Rev.1.00
03.09.01
REJ10J0132-0100Z
(1/4)
1. Outline
The M34553T-PTCB is a converter board for connecting the
M34552T2-CPE to a 48-pin 0.5-mm-pitch LQFP (48P6Q-A)
foot pattern (4553 Group) with the M34553T-PTCA.
2. Components (See Figure 1)
(1) M34553T-PTCB converter board x 1
(2) YQPACK048SD
(made by Tokyo Eletech Corporation)
(3) NQPACK048SD
(made by Tokyo Eletech Corporation)
(4) YQ-GUIDE’s
(made by Tokyo Eletech Corporation)
x 1
x 1
x 4
(5) User’s manual (This manual) x 1
(6) User’s manual (Japanese) x 1
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
(48-pin 0.5-mm-pitch LQFP)
48P6Q-A
20 times
4. Usage (See Figure 2)
You can use the M34553T-PTCB for debugging and board
mounted evaluation in common by mounting the
NQPACK048SD on the target board.
1. For debugging
Mount the NQPACK048SD and the YQPACK048SD in that
order on a foot pattern of the target system. Then attach the
YQ-GUIDE's and M34553T-PTCB to the YQPACK048SD.
Lastly, connect the M34553T-PTCA to the M34553T-PTCB.
2. For board-mounted evaluation
Mount an MCU with PROM (OTP) and the HQPACK048SD
(not included) on the NQPACK048SD on the target system.
Then secure them with the screws.
M34553T-PTCB
YQPACK048SD
①
YQ-GUIDE (x4)
NQPACK048SD
Figure 1 Package Components
a. Debugging
⑤
①
M34553T-PTCA
b. Onboard evaluation
(8)
(7)
(6)
Target system
: No. 1 pin position
Be sure to align the pin.
M34553T-PTCB
Use a flat blade
driver.
YQ-GUIDE’s (x4)
YQPACK048SD
NQPACK048SD
48-pin 0.5-mm-pitch
(48P6Q-A) foot pattern
(5)
(4)
(3)
(2)
(1)
Figure 2 Usage of the M34553T-PTCB
Use a Phillips
screwdriver.
HQPACK048SD
(not included)
MCU with PROM
(OTP)
These corners
are not round.
(2/4)
5. Connection Procedure (See Figure 3)
3. Mount the NQPACK048SD.
4. Attach the YQPACK048SD on the NQPACK048SD.
5. Secure the four corners of the YQPACK048SD with the
YQ-GUIDE's.
M34553T-PTCB
(5)
⑤
z Do NOT use the screws included with the
YQPACK048SD for securing it.
z Do NOT use the driver included with the
NQPACK048SD for securing the YQ-GUIDE’s. It is
used for securing the HQPACK048SD.
YQ-GUIDE’s (x4)
(4)
6. Attach the M34553T-PTCB to the YQPACK048SD.
7. Connect the M34553T-PTCA converter board to the
M34553T-PTCB.
Before using the M34553T-PTCB, be sure to read "7.
Precautions" on page 4.
YQPACK048SD
NQPACK048SD
48-pin 0.5-mm-pitch
(48P6Q-A) foot pattern
(2)
①
(1)
Figure 3 Connection procedure of the M34553T-PTCB
6. External Dimensions and a Sample Foot Pattern (see Figure 4)
M34553T-PTCA
Use a flat blade driver.
(3)
These corners are not round.
Target system
: No. 1 pin position
Be sure to align the pin.
35
36
37
RENESAS
M34553T-PTCB REV.A
50
35 0.5
1
MADE IN JAPAN
48
CN1
1
25
24
26
25
J1
13
12
28
Figure 4 External dimensions and a sample foot pattern
10
10
6.5
0.5
6.5
0.25
Unit: mm
(3/4)
7. Precautions
CAUTION
Cautions to Be Taken for Handling This Product:
● Be sure to align the pins when connecting the M34553T-PTCB.
● Do not apply excessive stress to the M34553T-PTCB main unit.
● To attach the M34553T-PTCB, be sure to use the YQ-GUIDE’s included with this product.
● Do not use the screws included with the YQPACK048SD for securing it.
IMPORTANT
Regarding This Product:
● We cannot accept any request for repair.
● For purchasing the NQPACK048SD, YQPACK048SD and HQPACK048SD, contact the following:
Tokyo Eletech Corporation
http://www.tetc.co.jp/
● For inquiries about this product or the contents of this manual, contact your local distributor.
Renesas Tool Homepage http://www.renesas.com/en/tools
8. Correspondence of Connectors J1, J2
Table 2 lists the correspondence of the M34553T-PTCB and NQPACK.
Table 2 Correspondence of the M34553T-PTCB and NQPACK
Pin number of
connector J1
1 41 SEG12 26 NC NC
2 42 SEG13 27 45 D5/INT
3 19 XIN 28 46 P20/SEG17
4 20 XOUT 29 47 P21/SEG18
5 21 CNVSS 30 48 P22/SEG19
6 22 XCIN/D6 31 1 P23/SEG20
7 23 XCOUT/D7 32 2 P00/SEG21
8 24 RESET* 33 3 P01/SEG22
9 25 COM0 34 4 P02/SEG23
10 26 COM1 35 5 P03/SEG24
11 27 COM2 36 6 P10/SEG25
12 28 COM3 37 7 P11/SEG26
13 29 SEG0/VLC3 38 8 P12/SEG27
14 30 SEG1/VLC2 39 9 P13/SEG28
15 31 SEG2/VLC1 40 10 D0
16 32 SEG3 41 11 D1
17 33 SEG4 42 12 D2
18 34 SEG5 43 13 D3
19 35 SEG6 44 14 D4
20 36 SEG7 45 15 D5/INT
21 37 SEG8 46 16 C/CNTR
22 38 SEG9 47 17 VDD
23 39 SEG10 48 18 VSS
24 40 SEG11 49 43 SEG14
25 NC NC 50 44 SEG15
(NC: No connection)
NQPACK Signal
Pin number of
connector J1
NQPACK Signal
(4/4)
Loading...