Renesas M32186T2-PTC User Manual

M32186T2-PTC

Converter for In-circuit Connection (for M32186FxxFP)

User’s Manual

1. Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.

1. These materials are intended as a refe rence to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

2. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.

3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).

4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.

5. Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

6. The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.

7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

8. Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.

1. This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.

2. In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

3. Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.

4. This product has been developed by assuming its use for program development and evaluation in laboratories. There fore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.

CAUTION

Renesas Tools Homepage http://www.renesas.com/tools

Keep safety first in your circuit designs!

Notes regarding these materials

Precautions to be taken when using this product

If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.

Rev.2.00
Oct. 16, 2006
REJ10J0971-0200

(1/6)

1. Outline

The M32186T2-PTC is a converter board for featuring the debugging function such as real-time tracing when using the SDI emulator,
M32100T-SDI-E, M32170T-SDI, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E with the M32186FxxFP.
Compared with the M32100T3-SDI-E or M32100T5-SDI-E, more loss of trace information occurs when using with the
M32100T-SDI-E, M32170T-SDI or M32100T2-SDI-E.
For the M32186T2-PTC, using with the M32100T3-SDI-E or M32100T5-SDI-E is recommended.

2. Package Components

(1) M32186T2-PTC converter board
(2) YQPACK144SD (made by Tokyo Electech Corporation)
(3) NQPACK144SD (made by Tokyo Electech Corporation)
(4) YQ-GUIDE x 4 (made by Tokyo Electech Corporation)
(5) Screwdriver (made by Tokyo Electech Corporation))
(6) M32186T2-PTC User’s Manual (This manual)
(7) M32186T2-PTC User’s Manual (Japanese)

M32186T2 -PTC

Screwdrive r

YQPACK144SD

NQPACK144SD

YQ-GU I DE

(x4)

3. Specifications

Table 3.

1 Specifications

Applicable package PLQP0144KA-A, 144P6Q-A (144-pin 0.5mm pitch LQFP)
Applicable MCU M32186FxxFP
Supported emulator M32100T-SDI-E, M32170T-SDI, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E

With the M32100T-SDI-E, M32170T-SDI, separately available M3T-PTC-CNV is required.
Mounted MCU M32192F8VWG (M32186EVA)
Clock 8 MHz
MCU power supply Supplied from the user system

Figure 2.1 Package components

4. Usage

The M32186T2-PTC can be used for debugging and on-board evaluation in common by mouting the NQPACK144SD on the user
system.

(1) For debugging

Mount the NQPACK144SD (included with the M32186T2-PTC) on the 144-pin QFP foot pattern of the user system. Then
connect the M32186T2-PTC via YQPACK144SD. As the M32192F8VWG (M32186EVA) is mounted on the M32186T2-PTC,
all functions of the emulator such as real-time tracing can be used.
Before using the M32186T2-PTC, be sure to read “8. Precautions” on page 6.

(2) For on-board evaluation

Mount the M32186FxxFP and the HQPACK144SD (separately available) in that order on the NQPACK144SD on the user
system.

(2/6)