Renesas M32182T2-PTC User Manual

M32182T2-PTC

Converter for In-circuit Connection (for M32182F3xFP)

Instruction Manual

Notes regarding these materials

• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas
Solutions Corporation or a third party.

• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation
assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published
by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained
herein.

• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.

• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.

• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government
and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of
Japan and/or the country of destination is prohibited.

• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished

• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

• Renesas Solutions Corporation strives to cope with the issues given below at some charge or without charge.

• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application

• This product is not qualified under UL or other safety standards and IEC or other industry standards. This fact must be taken into account when taking this

Safety Symbol and Meaning

Rev. 1.0

Precautions to be taken when using this product

developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment
else.

(1) Repairing or replacing a flawed product. There can be instances in which a product cannot be repaired if more than one year have passed since the
discontinuance of its marketing.

(2) Renovating or providing a workaround for product malfunction. This does not necessarily mean that Renesas Solutions Corporation guarantees the
renovation or the provision under any circumstances.

of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

product from Japan to some other country.

If the requirements shown in the "CAUTION" sentences are ignored,

CAUTION

the equipment may cause personal injury or damage to the products.

April 1, 2003
REJ10J0005-0100 Z

( 1 / 7 )

1. Outline

The M32182T2-PTC is a converter for featuring the debugging function such as real-time tracing
when using emulators M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E with the M32182F3xFP.

2. Package Components

(1) M32182T2-PTC converter
(2) YQPACK144SD (made by Tokyo Eletech Corporation)
(3) NQPACK144SD (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE x4 (made by Tokyo Eletech Corporation)
(5) Screwdriver (made by Tokyo Eletech Corporation)
(6) M32182T2-PTC Instruction Manual (This manual)

YQPACK144SD

M32182T2-PTC

NQPACK144SD

Figure 1 Package components of the M32182T2-PTC

3. Specifications

Table 1 Specifications

Applicable package
Supported MCU
Supported emulator

Mounted MCU
Clock
Power supply

4. Usage

The M32182T2-PTC can be used for debugging and board mounted evaluation in common by
mounting the NQPACK144SD on the target board.

(1) For debugging

YQ-GUIDE (x4)

Screwdriver

144P6Q-A (144-pin 0.5-mm-pitch QFP)
M32182F3xFP
M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E

With the M32170T-SDI or M32100T-SDI-E, separately available M3T-PTC­CNV is required.

M32180F8VWG
10 MHz
Supplied from the target board

Mount the NQPACK144SD (included with the M32182T2-PTC) on the 144QFP foot pattern of
the target board. Then connect the M32182T2-PTC via the YQPACK144SD. As the
M32180F8VWG is mounted on the M32182T2-PTC, all functions of the emulator such as real­time tracing can be used.
Before using the M32182T2-PTC, be sure to read "8. Precautions" on page 7.

(2) For board-mounted evaluation

Mount the M32182F3xFP and the HQPACK144SD (separately available) in that order on the
NQPACK144SD on the target system.

( 2 / 7 )

5. Connection Procedure

The procedure for connecting the M32182T2-PTC is shown
according to applications. See Figures 2 to 4.

5.1 For the M32100T2-SDI-E

(1) Mount the NQPACK144SD.
(2) Mount the YQPACK144SD on the NQPACK144SD.
(3) Secure the four corners of the YQPACK144SD with the

YQ-GUIDE's.
(4) Set the clock select switch.
(5) Mount the M32182T2-PTC on the YQPACK144SD.
(6) Connect the emulator probe to the M32182T2-PTC.

Connection to the M32100T2-SDI-E

: Position of No. 1 pin
Be sure to match the position of No. 1 pin of the foot pattern
and each part.

Figure 2 Connection to the M32100T2-SDI-E

( 3 / 7 )