Renesas M3062PT-EPBM User Manual

M3062PT-EPBM

MCU Board for Replacing M3062PT-EPB

User's Manual

Keep safety first in your circuit designs!

• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.

• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).

• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.

• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.

• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.

• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

Precautions to be taken when using this product

• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.

• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

If the requirements shown in the "CAUTION" sentences are ignored,

CAUTION

Renesas Tools Homepage http://www.renesas.com/en/tools

the equipment may cause personal injury or damage to the products.

Rev. 1.00
June 1, 2003
REJ10J0106-0100Z

( 1 / 2 )

1. Outline

The M3062PT-EPBM is an MCU board for replacing the emulation probe M3062PT-EPB for the M16C/62P.

2. Package Components

Package components

M3062PT-EPBM MCU board for replacing the M3062PT-EPB
M3062PT-EPBM User's Manual (this manual)
M3062PT-EPBM User's Manual (Japanese)

1 piece
1 piece
1 piece

3. Replacing the MCU Board

(1) Unscrew the four screws the emulation probe.

PCA7501EPBA

M3062PT-EPBM

(2) Pull out the M3062PT-EPBM from the PCA7501EPBA

vertically, otherwise the connectors may be damaged.

Four screws

PCA7501EPBA

New M3062PT-EPBM

Figure 3.1 Replacing the MCU board

CAUTION

Notes on Handling This Product:

• Before you replace the MCU board, shut off the power, otherwise internal circuits may be damaged.

• Insert or pull out the MCU board vertically, otherwise the connectors may be damaged.

• After replacing the MCU board, be careful about the direction for connecting to the PC7501.

(3) Attach connectors J1 and J2 of the new M3062PT-EPBM

to connectors J4 and J3 of the PCA7501EPBA,
respectively.

(4) Tighten the four screws in an even, crisscross pattern to

secure the new M3062PT-EPBM.

(5) After replacing the board, perform the self-check to make

sure that it is installed properly.

Note on This Product:

• For inquiries about the product or the contents of this manual, contact your local distributor.

( 2 / 2 )