Renesas M3028BT-EPBM User Manual
M3028BT-EPBM
MCU Board for Replacing M3028BT-EPB and M30290T2-CPE
User’s Manual (for replacement)
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
CAUTION
Renesas Tools Homepage http://www.renesas.com/en/tools
Keep safety first in your circuit designs!
Notes regarding these materials
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Rev.2.00
Dec. 01, 2006
REJ10J1491-0200
(1/2)
1. Outline
The M3028BT-EPBM is an MCU board for replacing the emulation probe M3028BT-EPB and the compact emulator
M30290T2-CPE for M16C/Tiny Series.
2. Components
Package components
Description Quantity
M3028BT-EPBM MCU board for replacing the M3028BT-EPB and M30290T2-CPE 1
M3028BT-EPBM User’s Manual (for replacement) (This manual)
M3028BT-EPBM User’s Manual (for replacement) (Japanese)
1
3. Replacing MCU Boards
PCA7501EPBA or
M30803T2-CPEA
M3028BT-EPBM
M
3
0
2
9
0
T
-
E
P
B
M
(1) Unscrew the four screws included with the M3028BT-EPB or the
M30290T2-CPE.
(2) Pull out the M3028BT-EPBM from the PCA7501EPBA of the
M3028BT-EPB, or from the M30803T-CPEA of the
M30290T2-CPE. Note that pull them out vertically, otherwise the
connectors may be damaged.
Screw x4
(3) Attach the new M3028BT-EPBM to the PCA7501EPBA of the
PCA7501EPBA or
M30803T2-CPEA
M3028BT-EPB, or the M30803T2-CPEA of the M30290T2-CPE.
The connecting directions are as follows
- With the M3028BT-EPB
PCA7501EPBA J3 connector to M3028BT-EPBM J1 connector
PCA7501EPBA J4 connector to M3028BT-EPBM J2 connector
M3028BT-EPBM
(this product)
- With the M30290T2-CPE
M30803T2-CPEA J3 connector to M3028BT-EPBM J1 connector
M30803T2-CPEA J4 connector to M3028BT-EPBM J2 connector
(4) Tighten the four screws in an even, crisscross pattern to secure the
M
3
0
2
9
0
T
-
E
P
B
M
M
3
0
2
9
0
T
-
E
P
B
M
new M3028BT-EPBM with a screwdriver.
(5) After replacing the board, perform the self-check to make sure that
it is installed properly. For details on the self-check, refer to the
user’s manual of each product.
Figure 3.1 Replacing MCU boards
4. Precautions for Safety
CAUTION
Cautions to Be Taken for Handling This Product:
● Before you replace the MCU board, shut off the power, otherwise internal circuits may be damaged.
● Insert or pull out the MCU board vertically, otherwise the connectors may be damaged.
● For the M3028BT-EPB, after replacing the MCU board, be careful about the direction for connecting to the
PC7501.
● The MCU board with 24MHz sticker for the M30290T-EPB and the M30290T2-CPE can be replaced with this
product.
Note on This product:
● For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
(2/2)
Loading...