Renesas M30262T-PTC User Manual

M30262T-PTC

Converter Board for M30262

User’s Manual

 Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products

better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.

 These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited

to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

 Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of

any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.

 All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information

on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).

 When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and

algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.

 Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under

circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

 The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or

reproduce in whole or in part these materials.

 If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from

the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

 Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the

products contained therein.

 This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your

program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.

 In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
 Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.

However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.

 This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not

fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.

CAUTION

Renesas Tools Homepage http://www.renesas.com/en/tools

Keep safety first in your circuit designs!

Notes regarding these materials

Precautions to be taken when using this product

If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.

Rev.2.00
January 16, 2005
REJ10J077-0200

( 1/4 )

1. Outline

The M30262T-PTC is a converter board for the M30262Group
for connecting an emulator for the M16C/62P to M30262
(48P6Q-A)

2. Package Components (See Figure 1)

(1) M30262T-PTC 1 pc.

(Base board M30262T-PTCB and 150mm FFC cable

included)
(2) YQPACK048SD (by Tokyo Eletech Corporation) 1 pc.
(3) NQPACK048SD (by Tokyo Eletech Corporation) 1 pc.

)1

(4) YQ-GUIDE's (4 pcs., by Tokyo Eletech Corporation
(5) M30262T-PTC User's Manual (This manual) 1 pc.

3. Specifications

Table 1 Specifications

Applicable

package

Insertion/removal

iterations of

connector

(48-pin 0.5-mm-pitch QFP)

M30262T-PTC and YQPACK048SD

M30262T-PTC and emulator for

48P6Q-A

100 times guaranteed

M16C/62P

pkg.

Figure 1 Package components of the M30262T-PTC

20 times guaranteed

(PC7501 + M3062PT-EPB) (PC4701 + M3062PT3-RPD-E)

4. Usage (See Figure 2)

The M30262T-PTC can be used for debugging and onboard
evaluation in common by mounting the NQPACK048SD on
the target board.

(1) For debugging

Mount the NQPACK048SD and the YQPACK048SDin
that order on the foot pattern of the target board. Then
attach the YQ-GUIDE's to the YQPACK048SD to
connect the M30262T-PTC. Do not use the screws
included with the YQPACK048SD. Finally, connect the
emulator for M16C/62P to the M30262T-PTC.

(2) For onboard evaluation

Mount the M30262 MCU and the HQPACK048SD (not
included) in that order on the NQPACK048SD on the user
system. Then secure the screws.

Before using the M30262T-PTC, be sure to read "9.
Precautions" (page 4). And, read the user's manual of an
emulator for M16C/62P.

Figure 2 Usage of the M30262T-PTC

L

O

O

T

P

2

6

/

C

6

1

M

(1) Debugging

Emulator for M16C/62P

I

S

L

O

O

T

P

2

6

/

E

C

D

6

1

M

M30262T-PTCB

YQPACK048SD

NQPACK048SD

●

Be sure to align the pins.

E

D

I

S

M

B

C

T

P

-

T

2

6

A

.

2

V

0

3

E

R

M

YQ-GUIDE’s

:No. 1 pin

A

.

N

V

A

E

P

R

A

J

C

T

N

I

P

-

E

T

2

D

6

A

2

M

0

3

M

N

A

P

A

A

J

.

V

N

I

E

R

E

D

B

A

C

T

M

P

-

T

2

6

2

0

3

M30262T-PTC

YQ-GUIDE’s (x4)NQPACK048SDYQPACK048SD

C
T

P

N

­I

T

E

2

6

D

2

A
A

N

.

0

A

M

V

3

P

E

M

A

R

J

(2) Onboard evaluation

N

I

E

D

N

A

A

M

P

A

J

(x4)

48-pin 0.5-mm-pitch

(48P6Q-A) foot pattern

HQPACK048SD

(not included)

M30262 MCU with

flash memory

( 2/4 )