Renesas HS0008EASF5HE User Manual
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas
companies.
Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry
Electronics Corporation took over all the business of both
Renesas Electronics website: http://www.renesas.com
st
, 2010
April 1
Renesas Electronics Corporation
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different inform ation to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrig hts, or other intellectual property rights
of third parties by or arising from the use of Renesa s Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, w hether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsi bility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You sho uld not use Renesas
Electronics products or the technolog y described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporate d into any products or systems whose manufac ture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable ca re in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesa s Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronic s. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Spec ific” or for which the product is not intended where you have failed t o obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and othe r product characteristics. Renesas Elec tronics shall have no liability for malfunctions or
damages arising out of the use of Renesa s Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, se miconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measure s to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
equipment; home electronic applianc es; machine tools; personal electronic equipment; and industrial robots.
crime systems; safety equipment; and medical equipment not specifically designed for life support.
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
User’s Manual
Flash Microcomputer
On-Board Programming Adapter
Board
User’s Manual
Renesas Microcomputer
Development Environment
System
HS0008EASF5HE
Rev.1.00 2009.10
Rev. 1.00 Oct. 02, 2009 Page ii of x
REJ10J2064-0100
Notes regarding these materials
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate
Renesas products for their use. Renesas neither makes warranties or representations with respect to the
accuracy or completeness of the information contained in this document nor grants any license to any
intellectual property rights or any other rights of Renesas or any third party with respect to the information in
this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising
out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,
programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military
applications such as the development of weapons of mass destruction or for the purpose of any other military
use. When exporting the products or technology described herein, you should follow the applicable export
control laws and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and
application circuit examples, is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas products listed in this
document, please confirm the latest product information with a Renesas sales office. Also, please pay regular
and careful attention to additional and different information to be disclosed by Renesas such as that disclosed
through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas
assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information
included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in
light of the total system before deciding about the applicability of such information to the intended application.
Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any
particular application and specifically disclaims any liability arising out of the application and use of the
information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas
products are not designed, manufactured or tested for applications or otherwise in systems the failure or
malfunction of which may cause a direct threat to human life or create a risk of human injury or which require
especially high quality and reliability such as safety systems, or equipment or systems for transportation and
traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication
transmission. If you are considering the use of our products for such purposes, please contact a Renesas
sales office beforehand. Renesas shall have no liability for dama
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who
elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas
Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect
to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or
damages arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use
conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and
injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention,
appropriate treatment for aging degradation or any other applicable measures. Among others, since the
evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or
system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas
products are attached or affixed, the risk of accident such as swallowing by infants and small children is very
high. You should implement safety measures so that Renesas products may not be easily detached from your
products. Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written
approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this
document, Renesas semiconductor products, or if you have any other inquiries.
ges arising out of the uses set forth above.
Rev. 1.00 Oct. 02, 2009 Page iii of x
REJ10J2064-0100
Rev. 1.00 Oct. 02, 2009 Page iv of x
REJ10J2064-0100
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this adapter board.
• KEEP the user's manual handy for future reference.
• Do not attempt to use the adapter board until you fully understand its mechanism.
Adapter Board:
Throughout this document, the term "adapter board" shall be defined as the adapter board main
unit and attached cables manufactured by Renesas Technology Corp.
The user system or a host computer is not included in this definition.
Purpose of the Adapter Board:
The adapter board, which is connected between a host computer and the user system, has a
function that can write/erase user application programs on the flash memory incorporated in the
flash microcomputer on the user system (on-board) when it is used with the on-board
programming tool.
Therefore, the burden on the peripheral circuit required during on-board programming can be
minimized. This board can be used for all flash microcomputers incorporating a flash memory
using Vcc and PVcc and cannot be used for flash microcomputers in which 12 V is applied to Vpp
pin and MD pin.
This adapter board must only be used for the above purpose.
Limited Applications:
This adapter board is not authorized for use in MEDICAL, atomic energy, aeronautical or
space technology applications without consent of the appropriate officer of a Renesas sales
company. Such use includes, but is not limited to, use in life support systems. Buyers of this
adapter board must notify the relevant Renesas sales offices before planning to use the product in
such applications.
Improvement Policy:
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as
Renesas) pursues a policy of continuing improvement in design, performance, and safety of the
adapter board. Renesas reserves the right to change, wholly or partially, the specifications, design,
user's manual, and other documentation at any time without notice.
Rev. 1.00 Oct. 02, 2009 Page v of x
REJ10J2064-0100
Target User of the Adapter board:
This adapter board should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the adapter board until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the adapter board.
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Renesas shall have no liability or legal responsibility for any problems caused by misuse,
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the
adapter board without Renesas's prior written consent or any problems caused by the user system.
All Rights Reserved:
This user's manual and adapter board are copyrighted and all rights are reserved by Renesas.
No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hardcopy or machine-readable form, by any means available without Renesas's prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Renesas's semiconductor products. Renesas assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Renesas.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Renesas cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the adapter board are therefore not all inclusive.
Therefore, you must use the adapter board safely at your own risk.
Rev. 1.00 Oct. 02, 2009 Page vi of x
REJ10J2064-0100
SAFETY PAGE
READ FIRST
• READ this user's manual before using this adapter board.
• KEEP the user's manual handy for future reference.
• Do not attempt to use the adapter board until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
avoided, will result in death or serious injury.
WARNING
avoided, could result in death or serious injury.
CAUTION
avoided, may result in minor or moderate injury.
CAUTION
potentially hazardous situation which, if not avoided, may result
in property damage.
DANGER indicates an imminently hazardous situation which, if not
WARNING indicates a potentially hazardous situation which, if not
CAUTION indicates a potentially hazardous situation which, if not
CAUTION used without the safety alert symbol indicates a
NOTE emphasizes essential information.
Rev. 1.00 Oct. 02, 2009 Page vii of x
REJ10J2064-0100
WARNING
Observe the precautions listed below. Failure to do so will
result in a FIRE HAZARD and will damage the user system and
the adapter board or will result in PERSONAL INJURY.
The USER PROGRAM will be LOST.
1. Always switch OFF the adapter board and user system before
connecting or disconnecting any CABLES, PARTS, or cable
head.
2. Before connecting, always make sure that pin 1 on both sides
are correctly aligned.
3. The adapter board can be used for flash microcomputers
to which Vcc = 2.7 V to 5.25 V, PVcc = 2.7 V to 5.25 V is
supplied from a single power source.
The adapter board cannot be used for flash microcomputers
in which 12 V is applied to both the Vpp pin and MD pin.
The values of Vcc and PVcc must not exceed the guaranteed
operation ranges.
Rev. 1.00 Oct. 02, 2009 Page viii of x
REJ10J2064-0100
Contents
Section 1 Overview..............................................................................................1
Section 2 Configuration.......................................................................................3
Section 3 Connectors, Switches, and LEDs.........................................................5
3.1 Connectors ........................................................................................................................5
3.1.1 User Interface Connector (P1) ............................................................................. 5
3.1.1 Serial Interface Connector (P2) ...........................................................................9
3.1.2 Adapter Board Power-Supply Connector (P3).....................................................9
3.2 Switches ............................................................................................................................ 9
3.2.1 Transfer Switch (START/STOP)......................................................................... 9
3.2.2 Power-Supply Switch (POWER)........................................................................ 10
3.2.3 Jumper Terminals for Power-Supply Switch (JP1).............................................. 11
3.2.4 Circuit Protector (F1)........................................................................................... 12
3.2.5 Control-Signal Enable/Disable Switches (S4) ..................................................... 13
3.2.6 Low (0)/High (1) Switches (S3) .......................................................................... 13
3.2.7 Vcc and PVcc Switches (S5 and S6) ...................................................................14
3.2.8 S3, S4, S5, and S6 Setting Examples................................................................... 15
3.3 LEDs ................................................................................................................................. 15
3.3.1 START LED (START: Red) ............................................................................... 15
3.3.2 Power LED (POWER: Green) ............................................................................. 15
Section 4 Notes on Use........................................................................................17
Section 5 Specifications.......................................................................................19
5.1 Input Voltage and Consumption Current.......................................................................... 19
5.2 Write Processing ............................................................................................................... 19
5.2.1 Specification of Control Sequence 1.................................................................... 20
5.2.2 Specification of the Control Sequence 2.............................................................. 21
Rev. 1.00 Oct. 02, 2009 Page ix of x
REJ10J2064-0100
Rev. 1.00 Oct. 02, 2009 Page x of x
REJ10J2064-0100
Loading...