Renesas M3T-DIRECT100S, Direct Dummy IC M3T-DIRECT100S User Manual

Loading...
Renesas M3T-DIRECT100S, Direct Dummy IC M3T-DIRECT100S User Manual

M3T-DIRECT100S

Direct Dummy IC for 100-pin 0.65-mm-pitch QFP

User's Manual

Keep safety first in your circuit designs!

Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http:// www.renesas.com).

When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part these materials.

If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

Precautions to be taken when using this product

This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment else.

In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

Renesas Tools Homepage http://www.renesas.com/en/tools

CAUTION

If the requirements shown in the "CAUTION" sentences are ignored,

the equipment may cause personal injury or damage to the products.

Rev. 1.00

 

July 1, 2003

( 1 / 4 )

REJ10J0182-0100Z

1. Outline

The M3T-DIRECT100S is an accessory tool for connecting an emulator probe and the target. Its dimensions are the same as those of the 100-pin 0.65-mm-pitch QFP (23 x 17 mm) IC

packages (100P6S-A and 100P6S-E).

M3T-DIRECT100S main unit

2. Package Components (See Figure 1)

Figure 1 Package component

(1)M3T-DIRECT100S main unit..........x1

(2)M3T-DIRECT100S User's Manual (This manual)

3. Specifications

Table 1 Specifications

Applicable package

100P6S-A

 

100P6P-E (formerly 100P6S-E)

 

(100-pin 0.65-mm-pitch QFP

 

 

Max. permissible

200 mA, 5V

current

 

 

 

Insertion/removal

20 times guaranteed

iterations of connector

 

 

 

Insulation resistance

100M Ω or more

 

 

4. Usage (See Figure 2)

: Position of No. 1 pin Be sure to align the pins.

The M3T-DIRECT100S can be used for debugging by

mounting it on the target system and connecting to an Figure 2 Usage emulator. Before using the M3T-DIRECT100S, be sure to

read "8. Precautions" on page 4.

Emulator

M3T-DIRECT100S

5. External Dimensions of the M3T-DIRECT100S

 

 

 

Symbol

Dimension (mm)

 

 

 

 

A

5.4

 

 

 

 

 

 

 

 

 

 

D

17.0

 

 

 

 

 

 

 

 

 

 

E

23.0

 

 

 

 

e

0.65

 

 

 

 

M

6.3

 

 

 

 

Upper connector J1:

 

 

 

AXN650585P

 

 

 

 

 

(made by Matsushita Electric Works, Ltd.)

 

 

 

Upper connector J2:

 

 

 

AXN550045P

 

 

 

 

 

(made by Matsushita Electric Works, Ltd.)

 

 

 

 

 

 

 

Board

Material: Glass epoxy board

 

 

 

 

 

 

 

Upper connector

Material: Heat tolerant resin (body)

1 : Pin No. of the M3T-DIRECT100S

 

Copper alloy (post, contact)

(J1, J2)

 

Plating: Nickel-based gold plating

1 : Pin No. of the upper connector

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3 External dimensions of the M3T-DIRECT100S

( 2 / 4 )

+ 2 hidden pages