ICP501022UPM
Specifications
Dimensions
Rechargeable Lithium Ion Polymer Battery Pack 3.7 V
With Safety Circuit
Renata Type
IEC Designation
Part Number
Contact:
Safety Circuit
Nominal Voltage
Nominal Capacity
Minimum Capacity
ICP501022
ICP061024
100640
Wire AWG 30
Yes
3.7 V
80 mAh
75 mAh
(0.2C cut off 3.0 V at
20°C)
Internal Impedance
Thickness ( t )
Lenghth ( l
Width ( w )
Weight
Charging Characteristic
Voltage
Current Normal
Max. Charging Current
Temperature at Charging
Discharge Characteristic
Cut off Voltage
Max Discharge Current
Temperature during Discharge
Cycle Life at Room Temperature
Storage Temperature
Information and contents in this data sheet are for reference purpose only. They do not constitute any warranty or representation and
are subject to change without notice. For most current information and further details, please contact your Renata representative.
< 460 mΩ / 50% SOC
Max 5.5 mm
Max 24.0 mm
Max 10.0 mm
~ 2.6 g
CC/CV – Constant Current / Constant Voltage
4.2 V CV
0.5 C CC – 40 mA
1.0 C CC – 80 mA
0 °C …. 45 °C
3.0 V
2.0 C – 160 mA ( for non continues discharge )
1.0 C – 80 mA ( for continues discharge )
-20 °C … 60 °C
> 80% of minimum capacity after 500 cycles ( 0.5 C
charge, 0.5 C discharge )
-20 °C … 45 °C
( 0 °C … 30 °C recommended in case of storage for
more than 3 months)
Renata SA Tel. +41 (0)61 975 75 75 sales@renata.com
CH-4452 Itingen/Switzerland Fax. +41 (0)61 975 75 95 www.renata.com
Rev. Li Ion ICP501022 - 11.01
Loading...