
Battery Holders
Packaging options
Battery holders can be supplied in different packaging
Industrial Bulk multi-cell trays
Packaging Code:
I
ndustrial Bulk packaging is the standard
packaging for manufacturers.
The number of battery holders per tray depends
on the respective model. So does the number of
trays per shrink pack.
Tape&Reel packaging
Packaging Code:
IB
TR
T
For SMT-battery holders there is a
packaging solution available.
Tape&Reel packaging is ideal for high-speed,
automated manufacturing lines.
The number of battery holders per reel depends on
the respective model.
Quantity per reel:
Model Quantity per Reel Part.No.*
SMTU1225-LF TR 750 pieces 701230
SMTU1632-LF TR 520 pieces 701231
SMTU2032-LF TR 485 pieces 701232
SMTU2430-LF TR 490 pieces 701233
SMTU2450N-LF TR 350 pieces 701234
SMTU2477N-LF TR 250 pieces 701235
SM2X2016-LF TR 485 pieces 701236
*Packaging: Tape&Reel (TR)
ape&Reel
28
www.renata.com

Battery Holders
W max.
330.0 REF 100.0 REF
ø 13.2
120°
2.2
±0.2
±0.2
17.3
±0.2
MATT E FINISH THESE AREAS
Packaging options
Dimensions of antistatic carrier tapes:
Model Dimensions (mm)
ABC DE
SMTU1225-LF 44.0 40.4 16.0 20.2 5.7
SMTU1632-LF 44.0 40.4 20.0 20.2 6.1
SMTU2032-LF 44.0 40.4 24.0 20.2 6.0
SMTU2430-LF 56.0 52.4 24.0 26.2 5.7
SMTU2450N-LF 56.0 52.4 24.0 26.2 8.2
SMTU2477N-LF 56.0 52.4 24.0 26.2 10.8
SM2x2016-LF 44.0 40.4 24.0 20.2 6.0
Dimensions of antistatic packaging reels
1. 10 sprocket hole pitch
Model Dimensions (mm)
W max.
SMTU1225-LF 50
SMTU1632-LF 50
SMTU2032-LF 50
SMTU2430-LF 50
SMTU2450N-LF 62
SMTU2477N-LF 62
SM2x2016-LF 50
All packaging materials comply witch relevant EIA, EIAJ and IEC specifications.
±1.0
±1.0
±1.0
±1.0
±1.0
±1.0
±1.0
cumulative tolerance
+/-.02
2. Camber not to exceed
1mm in 100 mm
3. Material: Black Conductive
Advantek Polystyrene
4. E measured from a plane
on the inside bottom of
the pocket to the top
surface of the carrier
5. Pocket position relative to
sprocket hole measured
as true position of pocket,
not pocket hole
29
the swiss power source