REMOVU RM-R1 User manual

USER MANUAL

Table of Contents

1. Understanding This User Manual

2. Product Components and Features

3. Using REMOVU R1

Charging the Battery
Turning Your Device On and OFF
Navigating Your Device
Wi-Fi Connection: Connecting Your GoPro for the 󽗉rst time (HERO3, 3+ Users)
Wi-Fi Connection: Connecting Your GoPro for the 󽗉rst time (HERO4 Users)
Wi-Fi Connection: Connection Failure/Reconnect
Controlling GoPro (Power On / O󽗈)

4-1. Modes and Settings -

4-2. Modes and Settings -

5. Firmware Upgrade

6. Product Speci󽗉cation

7. Trouble Shooting Guide

8. Warranty Information

HERO3, 3+ Series

HERO4 Series

3

4

6
6
6
7
8

9
10
11

12

17

20

21

22

23

1. Understanding This User Manual

Thank you for purchasing our Wireless GoPro Live Viewing Device, REMOVU R1 (here­inafter referred to as “R1”).

This Operator’s Guide describes how to handle and operate the R1.
Before using the R1, be sure to read this manual thoroughly for proper operation.

To enhance the performance of the product, the contents of this instruction manual
may be changed without prior notice.

Safety Precautions

(1) In accordance with Personal Information Security Law & related legislation, essel-t

Co., Ltd. will not be held responsible for any problem due to illegal use of this
product.

(2) Any defects or damage resulting from accident, misuse, abnormal use, abnormal

conditions, and improper storage will not be covered by the warranty.

(3) The warranty shall cover a period of 1 year. Please refer to Pg. 23 for more details.

(4) Use only a dry soft cloth or clean wipe when cleaning the LCD panel surface. Do

not use other cleaning substances. It may cause discoloration or damage to the
surface of the product.

(5) Keep away from children and pets. Store your devices out of the reach of children.

(6) REMOVU is the registered trademark of essel-t Co., Ltd. essel-t Co., Ltd. reserves the

rights regarding all works related to the REMOVU brand such as product design,
trademarks, and product-promotional videos. It is prohibited to reproduce, copy,
modify, or use related works without permission. Any violation may be penalized
in accordance with the relevant regulations.

(7) GoPro, HERO, the GoPro logo, and the GoPro Be a HERO logo are trademarks or

registered trademarks of GoPro, Inc.

3

2. Product Components and Features

Package Component

Please make sure your package includes all of the following items.

SET WRISTBAND USB CABLE QUICK GUIDE

Names of Each Part

10

1

2

7

8

9

5

1. REC Button (Shutter / OK)

2. LCD Screen

3. Network Status Indicator LED

4. M (Mode / Power) Button

5. Recharging Indicator LED

3

4

6

6. Back Button

7. USB Port Cover

8. USB Port (Recharging and Data Transfer)

9. Reset Button

10. Wristband Holder

4

LCD Screen Indicators

1 2 38

1080/60/W

0015 45:30

4576

1. Camera Modes / FOV(Field of View) Indicator
VIDEO Mode, PHOTO Mode, BURST Mode, TIME LAPSE Mode
(Please refer to Pg. 12 for more details.)

2. Resolution / FPS

3. GoPro Battery Life

4. R1 Battery Life

5. Saved Image / Video Counter

6. Remaining Recordable Hours / Number of Photos Counter

7. Recharging Indicator LED
Red Light when recharging. It goes o󽗈 when it is fully charged.

8. Wi-󽗉 Signal Strength Indicator

5

3. Using the REMOVU R1

Charging the Battery

*The battery should be fully charged before using R1 the 󽗉rst time.

1. Connect the device to a computer
USB port using the micro USB cable
included in the package.

2. R1 can also be charged with a USB
power adapter. (Adaptor’s not
included)
We recommend using GoPro, or
Apple iphone adaptors.

Turning Your Device On and OFF

Turning it on

1. Press the M (Mode / Power) button for about 1
second to turn on the power.

Turning it o󽗈

2. The REMOVU logo will appear. After short load­ing, Wi-Fi network list will pop up.

1. Press the M (Mode / Power) button for about 2
seconds to turn o󽗈 the device. REMOVU Power o󽗈
logo will appear then the device will be turned o󽗈
with the red LED blinking three times.

2. If no input is made for 30 seconds in the Live View
Mode, the screen will shut o󽗈 to save power.

6

Navigating Your Device

1080/60/W

0015 45:30

1. Live View Mode 2. Hide OSD 3. Screen Saver

4. Clock 6. Settings Mode5. Playback Mode

To Adjust Settings

After the device is powered on and Wi-Fi connec­tion is established, it goes into the Live View mode
automatically. From there, you can simply navigate
through di󽗈erent functions using the Back button.
The order of appearance of the functions are illus­trated below.

The list of the settings are:

LCD Brightness

Camera Network

System information

The settings can be adjusted in the Setting Mode.
Please navigate to the settings mode using the
M (Mode / Power) button, and enter the menu by
pressing the REC (Shutter / Select) button

STANDARD mode / ECO mode

It lists the available Wi-Fi network you can connect to

It displays the general information of the device

7

Wi-Fi Connections:
Connecting Your GoPro for the 󽗉rst time. (HERO3, 3+ Users)

HERO3, 3+ Wi-Fi SSID, and Password setup

1. Go to GoPro support page on GoPro Website to
upgrade your GoPro Camera to the latest 󽗉rm-

www.gopro.com

/support

Connecting your GoPro HERO3, 3+ to REMOVU

ware version.

2. While upgrading, you will be asked to set up Wi-Fi
SSID, Password. Please make sure to remember
your password and SSID.

1. Plese go to the GoPro App settings menu on your
HERO3, 3+ to turn on the Wi-Fi fuction.

2. Turn on your REMOVU R1.

3. When the Select Camera Network Screen ap­pears, select your GoPro’s SSID which you have
created.

4. Please type the password and press enter.

5. You will see Blue LED light when the connection
is sucessfully established.

8