Quick Setup Guide
Mini Bullet Camera
2M-BL3
1080p HD Video
Day/Night w/IR LEDs
Onboard Recording
PoE(Power over Ethernet)
Fast! Plug-N-Play Installation
WebViewer for PC & Mac
Mobile App
www.remotecamplus.com
2M-BL3
MINI BULLET CAMERA
2M-BL3 is fully featured for security surveillance and remote
monitoring needs. It is based on the DSP compression chip, and
makes it available on the network as real-time, full frame rate
Motion JPEG and H.264 (or MPEG-4) video streams.
Features
• H.264, MPEG4 and MJPEG
• RJ-45
• Micro SD
• 24 IR LEDs
• PoE
• Onvif
Note:
Check your package to make sure that you received the complete system,
including all components shown above.
Contents in the installation CD
1. The 2M-BL3 User’s Manual
2. The SmartManager User’s Manual
3. The SmartManager Installation Software
4. The WebViewer User’s Manual
5. The RemoteCamPlus Agent Software
6. The RemoteCamPlus Installation Guide
INSTALLATION
1
Camera Installation
Carefully remove the contents from the box,
and verity that nothing was damaged
in shipment.
• Secure the camera to the wall or ceiling
Wall Bracket
Ceiling Bracket
1
2
Connection
• Connecting to the Network
Connect a standard RJ-45 cable to the network port of the 2M-BL3. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for
connection to a hub.
• Micro SD memory slot
Insert the Micro SD memory card up to 32GB.
We recommend to use Class 6 or above.
Remove the front cap
Micro SD card slot
• Connecting the Power
Connect DC 12V 500mA, 6.0W / PoE 125mA, 6.0W with IR on.
(Power over Ethernet IEEE 802.3af Class0)
1
2
①Power Cable
Cable for Power source (DC 12V)
Note:
② Ethernet Cable
Cable for Ethernet (POE)
3
Network Connection and IP assignment
Notes: Adapter for DC 12V is not supplied.
2M-BL3 supports the operation through the network. When a camera is rst connected to the network it has no
IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager” utility on the CD.
1
Connect the 2M-BL3 to the network and power up.
2
Start SmartManager utility
2
(Start>All programs>SmartManager>
SmartManager), the main window
will be displayed, after a short while
any network devices connected to the
network will be displayed in the list.
3
Select the camera on the list and
click right button of the mouse.
You can see the pop-up menu
below.
Select Assign IP.
4
You can see Assign IP window.
Enter the required IP address.
OPERATION
2M-BL3 supports Windows and Mac operating systems. The recommended
browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with
Windows.
RemoteCamPlus Activation
1
Start a Browser.
1
Go to http://www.remotecamplus.com
2
Create User ID / Password
3
Notes:
For more information, refer to
the Smart Manger User’s Manual.
Notes:
To view streaming Live View and
Playback in Browser, set your
Browser to allow Adobe Flash.
Login
4
3
2
Access from a Browser
After Login, WebViewer will display your registered
1
Cameras and NVRs.
2M-BL3 Camera’s Live View page appears in your browser.
2
2M-BL3 provides several images and video stream formats.
Your requirements and the properties of your network will
determine the type you use. The Live View page provides
access to H.264, MPEG-4 and Motion JPEG video streams,
and to the list of available video streams.
3
Mobile APP
Android and iOS
Start Mobile App
1
Type User ID / Password
2
Login
3
4
Resetting to the factory default settings
To reset the 2M-BL3 to the original factory settings, use the Reset Button on the 2M-BL3,
as described below:
• Using the Reset Button
Follow the instructions below to reset the 2M-BL3 to the factory default settings using
the Reset Button.
Switch o the 2M-BL3 by disconnecting the power adapter.
1
Remove the Front Cap.
Reset Button
2
Press and hold the Reset Button with a straightened paperclip while reconnecting the power.
3
Keep the Reset Button press about 2 seconds.
4
Release the Reset button, and wait for the Status LED to turn o.
5
The Mini Bullet Camera resets to factory defaults and restarts after completing the factory reset.
6
Caution:
When performing a Factory Reset, you will lose any settings you have saved.
5
More Information
For more information, please see the RemoteCamPlus 2M-BL3 User’s Manual, which is available on the CD included in
this package.
4
Access high quality video anywhere!
www.remotecamplus.com
Loading...