REMINGTON SCC100 User Manual [fr]
Use and
Care Guide
For the Easiest and
Most Even Haircut Ever!
SCC-100R
SCC-100RC
Register Your New Product Today!
By registering your new Remington® product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
READ ALL
INSTRUCTIONS
BEFORE USING
THIS APPLIANCE.
DANGER
To reduce the risk of electric shock:
■Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■Use only when the appliance is
in dry condition.
■Detach the appliance from the
power supply cord before cleaning.
■Do not submerge this appliance in
water.
■Do not place or drop into water
or other liquid.
■Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■Except when charging, always
unplug this appliance from the
electrical outlet immediately
after using.
■Unplug this appliance before
cleaning it.
2
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
■This appliance is for household use
only.
■An appliance should never be left
unattended when it’s plugged
in, except when charging a
rechargeable appliance.
■Close supervision is necessary
when this appliance is used by,
on, or near children or persons
with disabilities.
■Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
■Keep the cord away from heated
surfaces.
■Never operate this appliance if
it has a damaged cord or plug,
if it is not working properly, if it
has been dropped or damaged,
or if it has been dropped into
water. If the appliance is within
the warranty period, return the
appliance to Spectrum Brands,
Inc., 601 Rayovac Drive, Madison,
WI 53711.
■Never drop or insert any object into
any of the appliance’s openings.
■Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
■Always store this appliance and
cord in a moisture-free area. Make
sure the cord is disconnected from
the clipper.
■Do not use this appliance with a
damaged or broken cutter unit,
as injury may occur. Always make
sure blades are aligned properly.
■Always attach plug to appliance,
then adapter to outlet. To disconnect,
turn all controls to OFF, then remove
adapter from outlet, then detach
power cord from the clipper for
storage.
■Dispose of used batteries properly.
Do not incinerate. Batteries may
explode if overheated. Do not wrap
in metal or aluminum foil. Wrap in
newspaper before discarding. It is
suggested that you contact local
battery redemption site(s) in your
area.
■The power unit is intended to be
correctly oriented in a vertical or
floor mount position.
SAVE THESE INSTRUCTIONS
Contents
English ................................ 1
Spanish ........................... 13
French
.............................. 25
3
Product Features
Congratulations on your purchase of one of the finest hair clippers available
today. Your Remington
and efficiently for years, helping you maintain a short hair cut.
®
Shortcut Clipper is designed to perform dependably
Clipper Parts
(A) Adjustable Guide Comb
(B) Charging LED
(C) Low Battery LED
(D) On/Off Button
(E) Pop-Out Trimmer Release Button
(F) Pop-Out Trimmer
(G) 5-Position Zoom Wheel
(H) Blade Oil
(I ) Cleaning Brush
(J) Balding Comb
(K) Charging Adapter
(F)
(E)
(A)
(C)
(D)
(G)
(H)
(B)
(K)
4
(J)
(I )
5-position zoom wheel
Your Shortcut Clipper comes with a balding
comb attached for ultra-close haircuts. For
longer lengths, use the adjustable guide
comb and the zoom wheel.
The 5-position zoom wheel provides a
choice of cutting lengths for a consistent
trim every time. Adjust the trimming length
by rotating the zoom wheel to the desired
position number. Refer to the chart below
for the position number of your desired
hair length.
SETTING
LENGTH
1 1½ 2 3 4
3/16" 1/4"
1/8"
3/8" 1/2"
5
How to Use
Be sure to read all safety instructions
and warnings at the front of this
manual before using this product.
Charging/Recharging
To recharge, use only the charging
adapter provided.
■ Turn the clipper off. Insert the
adapter plug into the bottom of the
clipper, then plug the adapter into
an electric outlet. The charging
indicator will glow blue, indicating
the unit is charging. A full charge
will take approx. 14-16 hours.
The low-battery indicator will glow
red when the clipper needs to be
recharged.
■ Your clipper cannot be
overcharged. You may leave
it plugged in between uses.
However, if the clipper is not going
to be used for an extended period
(2 weeks), unplug the unit and
recharge when resuming use.
■ Charge the clipper at temperatures
between 40-90˚F to avoid
adversely affecting battery life.
Before Cutting Hair
1. Make sure the hair clipper is
running smoothly and is charged.
2. Ensure the
hair is dry.
Hair clippers
perform best
with dry hair,
making it
easier to see
how much
hair is being
cut.
3. Hold the hair clipper in the palm
of your hand similar to how you
would hold a hairbrush.
6
Ultra Short Hair Length
The Shortcut Clipper comes with a
balding comb attached. An adjustable
guide comb for longer hair lengths is
included. To use the balding comb,
simply begin trimming your hair with
a fully-charged clipper.
Balding Comb
Selecting Hair Length Setting
The Shortcut Clipper has an adjustable guide comb that lets you
change trim lengths simply by rolling
the clipper’s zoom wheel.
■ Replace the balding comb
attachment with the adjustable
guide comb.
■ Roll the zoom wheel toward the top
of the clipper to adjust for longer
length, and toward the bottom of
the clipper for
shorter length.
The wheel
will click into
one of five
positions.
■ Begin
trimming
at one of
the longest
settings (#3 or #4) to avoid
accidentally trimming hair too
short. As you become familiar with
the settings, you can then select
your desired length setting.
NOTE: The adjustable guide comb
must be attached to the clipper in
order to use the hair length selector.
Adjustable Guide Comb
To remove a comb:
■ Be sure the clipper is in the OFF
position.
■ While holding clipper in one hand
and holding the zoom wheel to
prevent it from turning, gently pull
the comb away from the clipper.
The combs can be removed and
replaced on any setting.
To replace a comb:
■ Be certain clipper is in OFF
position.
■ While holding the clipper in one
hand, and holding the zoom wheel
to prevent it from turning, slide the
comb over the top of the clipper
until it clicks into position.
NOTE: The combs can only be placed
on the clipper one way; if the comb
does not fit properly, remove and
reverse it.
7
Usage Tips
Giving a Comfortable,
Even Cut
Allow the clipper to cut through the
hair without moving it too quickly.
Moving the clipper too quickly may
create a pulling sensation.
Use short strokes when cutting, and
initially use the longest setting. You
can always use a closer setting later
if you want a closer cut.
How to Give a Haircut
1. Start at the back of the head.
Holding the clipper as shown,
lightly stroke upward making sure
you are taking off the desired
amount of hair. Work your way up
to the crown of the head. When
completed, move clipper over and
cut down the head to the nape
of the neck. The SCC-100R is a
bidirectional hair cutter so you can
cut in either direction.
2. Repeat the same procedure across
the back of the head. Make sure
the length of the hair is trimmed to
the same length on both sides of
the head.
3. To cut the hair at the top of the
head, cut
from the
front to the
back in both
directions
until the
hair is cut to
the desired
length.
8
4. To trim around the ears and short
hairs at the
nape of the
neck simply
press the
release button
and slide
the pop-up
detail trimmer
outward. Be
careful not to
touch the ears or to press too hard.
5. Make sure to check over the entire
head for any uneven areas.
Cleaning and Maintenance
Cleaning
Before You Begin
1. The hair clipper shall be detached
from the power supply cord before
cleaning.
2. The hair clipper shall not be used
until it has dried.
This appliance is a
washable product,
the hand-held part
of which may be
cleaned under water.
How To Clean
1. First remove the attached comb
from the clipper by pulling it firmly
away from the blades.
2. For best
results, you
can remove
the inside
blade guard
to expose the
blades.
3. Then use
the brush
provided to
sweep away hair clippings from
the product.
4. This device can also be rinsed
under the faucet to remove any
remaining debris.
5. After cleaning is complete,
reassemble the blade guard to
the product by snapping it into its
original position.
6. Reattach the comb to the product.
Note: After rinsing, the blades should
be oiled for optimum performance
and product life.
Blade Care
The life of your clippers will depend
on frequency of use, care, and hair
type and condition. The Shortcut
Clipper blades are lubed for life for
your convenience. However, if you
rinse the product under running
water, an oil bottle has been provided
to re-oil the blades.
9
Maintenance
Maintenance
This appliance has no user serviceable parts.
Battery Removal
The following procedure should be
followed for battery removal prior to
disposing of the product:
1. Make sure the clipper is unplugged
from any outlets so you don't risk
an electrical shock.
2. With a flat head screwdriver, gently
pry the top cover from the unit. This
will expose the internal circuitry
compartment.
3. With a Phillips head screwdriver,
remove the four screws on the
circuitry compartment top cover.
Storage
■
Always store this appliance and
cord-adapter in a moisture-free
area. Do not store it in temperatures
exceeding 140°F (60°C).
■ Do not wrap the cord around the
appliance.
4. Locate 6 latches around the
perimeter of the circuitry
compartment and pry each to
loosen top cover.
5. Remove cover to expose the
batteries and circuitry.
6. Clip the wires connecting the
batteries to the circuit board and
remove the batteries.
10
Performance Guarantee
Performance Guarantee
Spectrum Brands, Inc.
Money-Back Offer
If within 30 days after you have purchased your Remington
are not satisfied with it and would like
a refund, just return it, together with the
sales receipt, to the retailer from whom
it was purchased. Spectrum Brands,
Inc. will reimburse all retailers who
accept such appliances within 30 days
from date of purchase. If you have any
questions regarding this money-back
guarantee, please call 800-736-4648 in
the U.S. or 800-268-0425 in Canada.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship for a two-year period from the
original date of consumer purchase.
If the product should become defective within the warranty period, we
will replace it free of charge. Return
your product and sales receipt with
your name, address and day time
phone number to: Remington Returns
Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more infor-
mation call 800-736-4648 in the U.S.
or 800-268-0425 in Canada.
®
product, you
This warranty does not cover
products damaged by the following:
■ Accident, misuse, abuse or alter-
ation of the product
■ Servicing by unauthorized per-
sons
■ Use with unauthorized accesso-
ries
■ Connecting it to incorrect current
and voltage
■ Wrapping cord around appliance
causing premature wear & breakage
■ Any other conditions beyond our
control
No responsibility, obligations, or
liability is assumed for the installation
or maintenance of this product
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING
BUT NOT LIMITED TO IMPLIED
WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE LIMITED
IN DURATION TO TWO YEARS FROM
DATE OF ORIGINAL PURCHASE.
.
KEEP ORIGINAL SALES RECEIPT AS
PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
11
Loading...