Page 1
Bracket can be used for the following installation as shown below.
Installation Guide (For MAS-1818 to MAS-2424)
MAS
Operation
Pull
Pull down the screen
with lanyard.
1 2
1
2
To Use:
1
2
1
2
To Keep:
Use hand to set at desired
position.
Pull down screen slightly
to release.
Guide the screen up without
releasing the landyard.
V: 3.0
C
COPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD Website: www.remacotech.com
* For details dimension ,
please refer to technical specifications at
www.remacotech.com
Screen Width
Lanyard
Wall Mount
Ceiling Mount
Extension Mount (Wall)
Page 2
47
Power Drill
B) Drill Dia 8mm Holes to a depth 47mm.
STEP 1
STEP 2
STEP 3
8mm Drill
Important Notes:
All screens are thoroughly inspected and fully tested operational in factory.
We accept no liability whatsoever for any losses due to improper installation, operation, or any unauthorized alternation at the point of installation.
All trademarks contained in this installation guide are the property of their respective owners.
End
A) Mark the bracket position.
C
COPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD Website: www.remacotech.com
Sleeve Anchor
C) Sleeve Plastic Anchor into the hole.
Screen Frame
M6 Nylon Nut
( 4 Nos)
Sleeve Anchor
Dia 8 x 47 (M6x40)
( 4 Nos)
M6 Washer
( 4 Nos)
Spanner
or
Plier
Installation
Loading...