Reliable Sewquiet 4000 User Manual
Sewquiet
™
4000
Industrial DC Servomotor Instruction Manual
Servomoteur industriel à CC Guide d’utilisation
Servomotor Industrial de CD Manual de Instrucciones
USER INSTRUCTIONS
Thank you for purchasing the Reliable™ Sewquiet™ 4000 DC servomotor. Please follow the instructions carefully.
With proper care and maintenance, your motor will provide years of dependable service.
INSTALLATION
Put the bottom of the motor upwards to the tabletop and fix the motor to the tabletop with the bolts provided.
Connect the treadle rod with the connecting rod joint. Plug the machine into the power outlet and turn the 2-way
switch (on the rear of the motor) to the clockwise (blindstitch, sergers) or counter-clockwise position (all other
types of machines). Turn the power off and select the correct number on the speed set-button (#1–#4).
MACHINE TYPE
SPEED-BUTTON
PULLEY SIZE
APPROX. SPEED RPM
Basic single needle
#4
#90
4500
Basic two needle/needle feed
#3
#90
2500
Walking foot
#2
#90
2000
Sergers – overlock
#4
#90
6300
Blindstitch
#1
#50
1375
Zig-Zag (20U style)
#1
#90
1850
Zig-Zag (High-Speed)
#4
#90
4500
Zig-Zag + Walking Foot
#3
#50
2500
Coverstitch machine
#4
#90
6000
In order to prevent possible damage to your machine, if the machine you have is not in the categories list,
please call your dealer to obtain the correct speed setting and pulley size.
CAUTION LIGHT
The Sewquiet™ 4000 is equipped with an overload protection circuit that activates automatically, shutting the
motor down if the machine is jammed or if it senses an unsafe load on the motor. A warning light will flash,
indicating that the motor has activated its automatic protection circuit. After the jam has been fixed, simply turn
the motor back on and you are ready to resume sewing.
TROUBLESHOOTING
If the motor fails, please turn the power off and disconnect from the main power supply. On the front and the
rear of the motor are two black plugs that contain a carbon brush. Take a screwdriver and unscrew the plug and
remove the carbon brush. Replace each of the two carbon brushes with new ones (2 extra brushes are supplied
with each motor). Also check the fuse in the front of the motor and see if it is still good. If not, please replace it
with a similar amperage fuse. If you are still not able to get the motor to work, please contact your sales agent or
Reliable Corporation.
RELIABLE PRODUCTS WARRANTY
LIMITED 1 YEAR WARRANTY
For a period of one year from date of purchase we will, free of charge, repair defects in material or workmanship which appear in the mechanical or electrical parts of all Reliable™ brand products excluding all wear and
tear components.
Wear and Tear Component List:
• Steam Equipment: Press pad and cover, Teflon® seals, Teflon® shoe, steam-electric hoses
• Sewing Equipment: Hooks, loopers, stitch plates, feed dogs, needles, motor clutch disc, brushes, fuse
• Cloth Cutting Equipment: Blades, stones, sharpening bands, shoe
• Halogen Lights: Bulbs
LIMITED 90-DAY WARRANTY ON ALL PARTS AND ADJUSTMENTS
For a period of 90 days from date of purchase we will, free of charge, provide required adjustments and repairs
to your Reliable™ product.
Warranty service is available by returning the product with this warranty document and proof of purchase to your
nearest authorized Reliable™ service center.
This limited warranty is in effect provided that your machine is used for normal purposes for which it was
intended, and is given reasonable good care and maintenance in accordance with the instructions contained
in the instruction booklet.
Your authorized dealer (or Reliable Corporation) will not be held responsible for damage if the machine has
been repaired by an unauthorized dealer.
These warranties give you specific legal rights and you may have other rights, which vary from province/state
to province/state.
If you have any questions regarding these warranties, you may write to:
Reliable Corporation
100 Wingold Avenue, Unit 5
Toronto, Ontario
Canada M6B 4K7
www.reliablecorporation.com
Loading...