Instructions for LCD
Alarm Clock
1. Mode / Alarm On/Off button
2. Hour / Alarm sound select button
3. Minute / Hr. Report On/Off button
4. Volume Lo/Hi switch
5. Snooze / Light / Talk button
6. Hr. Report icon
7. Snooze icon
8. Alarm Set icon
9. Alarm On icon
To Operate Clock
This clock requires two "AA" size batteries. Follow the
battery polarity indication inside the battery compartment
carefully when installing batteries.
Set Time
Press the Mode button until the display is flashing and the icons
"Zz" and " " appear, then press HOUR or MINUTE buttons to set
time correctly.
Set Alarm
Press the Mode button until the display is flashing and the icons
"Zz", " " and "AL" appear, then press HOUR or MINUTE buttons to
set alarm time correctly.
Use Alarm
Press the Mode button until the icons "Zz" and " " appear, which
means the alarm is turned on. Press the Mode button until the icons
"Zz" and " " disappear. The alarm is turned-off permanently.
Stop Alarm
Press any button (except SNOOZE / LIGHT) when the alarm is
sounding, the alarm will stop and sound again next day.
Use Snooze
Press SNOOZE / LIGHT Button when the alarm is sounding, the
snooze icon "Zz" and " " are blinking, which means the snooze
function is activated. The alarm will stop and sound again every 10
minutes. You can repeat the snooze function as many times as you
like.
Hourly Announcement
Press the Minute (HR Report ON/OFF) button once, the icon will
show on the upper left corner of display means this function is
activated.
To Use the Display Back Light
Press and hold the SNOOZE / LIGHT / TALK Button, it will
announce current time and green soft back light will glow for visual
display at night.
Alarm sound selection
Press the HOUR button to hear each alarm sound (Rooster, Steady
Beep, Cuckoo). Choose your desired alarm sound.
MADE IN CHINA M628
Loading...