Reizen Big Button Speaker Phone User Manual

CAUTION

This product is an electrical device and can be hazardous if immersed in water. To avoid the
possibility of electrical shock, do not use it while in the bathtub or shower or when your are
wet. If your accidentally drop it into water. first unplug its cord (or cords) from the modular
jack, then remove the equipment from the water.

OPERATION INSTRUCTION
TONE/PULSE SELECTOR

Select the type of dialing that you desire or that your telephone system requires.

• TONE ... The unit will operate using tone dialing.

• PULSE ... The unit will dial using rotary dial type pulses.

RINGER (HI/LOW/OFF) SWITCH

When you don't want to be disturbed by incoming calls, slide the ringer switch to the "Low"
or "Off" position, when the switch at the "Low", the ringer sound level will be cut down. If the
switch at "Off" position, you can still dial out, but cannot hear ringer sound of any incoming
call.

MAKING CALLS AS A NORMAL TELEPHONE

1. Select the desired dialing mode with the Tone/Pulse selector. (Do this only once)

2. Pick up the handset and listen for a dial tone.

3. Dial your call.

RECEIVING CALLS AS A NORMAL TELEPHONE

When the phone rings

1. Lift the handset and speak into the mouth piece of the handset.

2. Hang up the handset to release the telephone line when conversation is completed.

USE AS A HANDS FREE PHONE

Press the "HANDS FREE" Key, the IN USE INDICATOR will light, the unit is ready for use as
a speaker phone without picking up the "Handset", you can talk to the caller via the
"MICROPHONE" and hear from the "SPEAKER" the sound level can he adjusted by sliding
the volume control.

HANDS FREE ANSWERING

Be sure to notify the other party that you are using the speakerphone mode, the other party
may not wish anyone else to hear the conversation.

1. Press the SPEAKERPHONE button and the INDICATOR lights and begin to speak also
the in use indicator lights.

IN USE INDICATOR

This bulb will light if you lift the receiver showing the phone is connected properly and will
remind you the handset if off the hook or not sealed in the base properly.

LED LIGHT

When the phone rings, the LED light will flashing until you pick up the handset.